Enhancing the Decolorization of Methylene Blue Using a Low-Cost Super-Absorbent Aided by Response Surface Methodology

The presence of organic dyes from industrial wastewater can cause pollution and exacerbate environmental problems; therefore, in the present work, activated carbon was synthesized from locally available oil palm trunk (OPT) biomass as a low-cost adsorbent to remove synthetic dye from aqueous media. The physical properties of the synthesized oil palm trunk activated carbon (OPTAC) were analyzed by SEM, FTIR-ATR, and XRD. The concurrent effects of the process variables (adsorbent dosage (g), methylene blue (MB) concentration (mg/L), and contact time (h)) on the MB removal percentage from aqueous solution were studied using a three-factor three-level Box–Behnken design (BBD) of response surface methodology (RSM), followed by the optimization of MB adsorption using OPTAC as the adsorbent. Based on the results of the analysis of variance (ANOVA) for the three parameters considered, adsorbent dosage (X₁) is the most crucial parameter, with an F-value of 1857.43, followed by MB concentration (X₂) and contact time (X₃) with the F-values of 95.60 and 29.48, respectively. Furthermore, the highest MB removal efficiency of 97.9% was achieved at the optimum X₁, X₂, and X₃ of 1.5 g, 200 mg/L, and 2 h, respectively.     

Thallium fractionation in polluted environmental samples using a modified BCR three-step sequential extraction procedure and its determination by electrothermal atomic absorption spectrometry

Determination of thallium in polluted environmental samples and their extracts obtained by a modified BCR three-step sequential extraction procedure was used to study thallium distribution and mobility in the monitored polluted area affected by acidification (Šobov, Central Slovakia). The results of fractionation applied to 5 soil certified reference materials and 14 environmental samples show that the vast majority of thallium occurred in the residual fraction. This means that highly toxic thallium is strongly entrapped in the parent rock materials remains immobile and its environmental toxicity is therefore reduced. The limit of detection for thallium in the studied fractions was lower than 0.050 mg kg⁻¹, the precision (RSD) of the ultratrace determination of thallium in the studied fractions was better than 17 % and the accuracy of the used method was verified by analyzing certified reference materials. Presented at the XVIIIth Slovak Spectroscopic Conference, Spišská Nová Ves, 15–18 October 2006.     

Specific O₂⁻ generation in corona discharge for ion mobility spectrometry

This study deals with O₂⁻ generation in corona discharge (CD) in point to plane geometry for single flow ion mobility spectrometry (IMS) with gas outlet located behind the ionization source. We have designed CD of special geometry in order to achieve the high O₂⁻ yield. Using this ion source we have achieved in zero air conditions that up to 74% all negative ions were O₂⁻ or O₂⁻(H₂O). It has been demonstrated that the non-electronegative nitrogen positively influences the efficiency of O₂⁻ generation in O₂/N₂ mixtures. The reduced ion mobility of 2.27 cm² V⁻¹ s⁻¹ has been measured for O₂⁻/O₂⁻(H₂O) ions in zero air. Additional ions detected in zero air (less than 200 ppb CO₂) using the mass spectrometric and IMS technique were, NO₂⁻, N₂O₂⁻ (2.37 cm² V⁻¹ s⁻¹), NO₃⁻, N₂O₃⁻ and N₂O₃⁻(H₂O). The CO₃⁻ and CO₄⁻ ions have been detected after the introduction of 5 ppm CO₂ into zero air.     

The role of entropy in initializing the aggregation of peptides: a first principle study on oligopeptide oligomerization

The initiation and progression of Alzheimer's disease is coupled to the oligo- and polymerization of amyloid peptides in the brain. Amyloid like aggregates of protein domains were found practically independent of their primary sequences. Thus, the driving force of the transformation from the original to a disordered amyloid fold is expected to lie in the protein backbone common to all proteins. In order to investigate the thermodynamics of oligomerization, full geometry optimizations and frequency calculations were performed both on parallel and antiparallel β-pleated sheet model structures of [HCO-(Ala)(1-6)-NH(2)](2) and (For-Ala(1-2)-NH(2))(1-6) peptides, both at the B3LYP and M05-2X/6-311++G(d,p)//M05-2X/6-31G(d) levels of theory, both in vacuum and in water. Our results show that relative entropy and enthalpy both show a hyperbolic decrease with increasing residue number and with increasing number of strands as well. Thus, di- and oligomerization are always thermodynamically favored. Antiparallel arrangements were found to have greater stability than parallel arrangements of the polypeptide backbones. During our study the relative changes in thermodynamic functions are found to be constant for long enough peptides, indicating that stability and entropy terms are predictable. All thermodynamic functions of antiparallel di- and oligomers show a staggered nature along the increasing residue number. By identifying and analyzing the 6 newly emerging dimer vibrational modes of the 10- and 14-membered building units, the staggered nature of the entropy function can be rationalized. Thus, the vanishing rotational and translational modes with respect to single strands are converted into entropy terms "holding tight" the dimers and oligomers formed, rationalizing the intrinsic adherence of natural polypeptide backbones to aggregate.     

The use of molecularly imprinted polymers for the multicomponent determination of endocrine‐disrupting compounds in water and sediment

The method employing molecularly imprinted polymers for the extraction and clean up of endocrine‐disrupting compounds (estrogens, bisphenol A, and alkylphenols) from water and sediment is described. The identical extraction/clean‐up and LC‐MS/MS condition were used for the analysis of both types of samples. The method showed high recoveries ranging from 90 to 99% with excellent precision (intrabatch: 3.6–9.3%; interbatch: 5.6–11.4% for water; intrabatch: 4.3–8.5%; interbatch: 6.1–9.6% for sediment). The LOD was in the range of 0.7–1.9 ng/L and 0.3–0.6 ng/g for water and sediment, respectively. Overall extraction on molecularly imprinted polymers substantially enhanced sample clean‐up. The difference in efficiency of clean‐up was particularly pronounced when a large sample volume/weight was extracted and analyzed. Finally, the method was successfully applied for the analysis of 20 water and sediment samples.     

Dispersion of polymeric-coated–silica aerogel particles in unsaturated polyester composites: Effects on thermal-mechanical properties

The thermal-mechanical properties of unsaturated polyester (UP) composite were enhanced by the dispersion of silica aerogel (SA) with preserved pores. Low-cost SA was prepared from rice husk via the sol-gel process and ambient pressure drying. A new method was proposed to encapsulate the hydrophobic aerogel surface pores with hydrophilic polyvinyl alcohol (PVA) film using the fluidized-bed coating process. The dispersion of PVA-coated aerogel with preserved pores in the polyester matrix resulted in an increase of specific compressive strength (44.1?MPa?·?cm³?g^?1), thermal insulation (0.23?W?m^?1?K^?1), and thermal stability (T_onset?=?310°C), but decreased the glass transition temperature (T_g?=?260°C).     

An adaptive multi-start graph partitioning algorithm for structuring cellular networks

In mobile network design, the problem of assigning network elements to controllers when defining network structure can be modeled as a graph partitioning problem. In this paper, a comprehensive analysis of a sophisticated graph partitioning algorithm for grouping base stations into packet control units in a mobile network is presented. The proposed algorithm combines multi-level and adaptive multi-start schemes to obtain high quality solutions efficiently. Performance assessment is carried out on a set of problem instances built from measurements in a live network. Overall results confirm that the proposed algorithm finds solutions better than those obtained by the classical multi-level approaches and much faster than classical multi-start approaches. The analysis of the optimization surface shows that the best local minima values follow a Gumbel distribution, which justifies the stagnation of naive multi-start approaches after a few attempts. Likewise, the analysis shows that the best local minima share strong similarities, which is the reason for the superiority of adaptive multi-start approaches. Finally, a sensitivity analysis shows the best internal parameter settings in the algorithm.