Oxidative addition of small molecules to a dinuclear Au(I) amidinate complex, Au2[(2,6-Me2Ph)2N2CH]2. Syntheses and characterization of Au(II) amidinate complexes including one which possesses Au(II)-oxygen bonds

The dinuclear Au(I) amidinate complex Au2(2,6-Me2Ph-form)2 (1) is isolated in quantitative yield by the reaction of (THT)AuCl and the potassium salt of 2,6-Me2Ph-form in a 1:1 stoichiometric ratio. Various reagents such as Cl2, Br2, I2, CH3I, and benzoyl peroxide add to the dinuclear Au(I)amidinate complex Au2(2,6-Me2Ph-form)2 to form oxidative-addition Au(II) metal-metal-bonded complexes 2, 3, 4, 5, and 6. The Au(II) amidinate complexes are stable as solids at room temperature. The structures of the dinuclear Au2(2,6-Me2Ph-form)2 and the Au(II) oxidative-addition products Au2(2,6-Me2Ph-form)2X2, X=Cl, Br, I, are reported. Crystalline products with an equal amount of oxidized and unoxidized complexes in the same unit cell, [Au2(2,6-Me2Ph-form)2X2][Au2(2,6-Me2Ph-form)2], X=Cl, 2m, or Br, 3m, are isolated and their structures are presented. The structure of [Au2(2,6-Me2Ph-form)2X2][Au2(2,6-Me2Ph-form)2], X=Cl has a Au(II)-Au(II) distance slightly longer, 0.05A, than that observed in the fully oxidized product Au2(2,6-Me2-form)2Cl2, 2. The gold-gold distance in the dinuclear complex decreases upon oxidative addition with halogens from 2.7 to 2.5 A, similar to observations made with the Au(I) dithiolates and ylides. The oxidative addition of benzoyl peroxide leads to the isolation of the first stable dinuclear Au(II) nitrogen complex possessing Au-O bonds, Au2(2,6-Me2Ph-form)2(PhCOO)2, 6, with the shortest Au-Au distance known for Au(II) amidinate complexes, 2.48 A. The structure consists of unidentate benzoate units linked through oxygen to the Au(II) centers. The replacement of the bromide in 3 by chloride, and the benzoate groups in 6 by chloride or bromide also occurs readily. The unit cell dimensions are, for 1, a=7.354(6) A, b=9.661(7) A, c=11.421(10) A, alpha=81.74(5) degrees, beta=71.23(5) degrees, and gamma=86.07(9) degrees (space group P, Z=1), for 2.1.5C6H12, a=11.012(2) A, b=18.464(4) A, c=19.467(4) A, alpha=90 degrees, beta=94.86(3) degrees, and gamma=90 degrees (space group P21/c, Z=4), for 2m.ClCH2CH2Cl, a=16.597(3) A, b=10.606(2) A, c=19.809(3) A, alpha=90 degrees, beta=94.155(6) degrees, and gamma=90 degrees (space group P21/n, Z=2), for 3m, a=16.967(3) A, b=10.783(2) A, c=20.060(4) A, alpha=90 degrees, beta=93.77(3) degrees, and gamma=90 degrees (space group P21/n, Z=2), for 4.THF, a=8.0611(12) A, b=10.956(16) A, c=11.352(17) A, alpha=84.815(2) degrees, beta=78.352(2) degrees, and gamma=88.577(2) degrees (space group P, Z=1), for 5, a=16.688 A, b=10.672(4) A, c=19.953(7) A, alpha=90.00 (6) degrees, beta=94.565(7) degrees, and gamma=90.00 degrees (space group P21/n, Z=4), for 6.0.5C7H8, a=11.160(3) A, b=12.112(3) A, c=12.364(3) A, alpha=115.168(4) degrees, beta=161.112(4) degrees, and gamma=106.253(5) degrees (space group P, Z=1).     

A Novel Alternative Methods for Decalcification of Water Resources Using Green Agro-Ashes

The strategic idea in this work was to increase pH values by employing natural alkali sources (i.e., HCO₃⁻ and CO₃²⁻) from four tested agro-ashes as an alternative to chemicals (i.e., lime or soda ash). The considerable proportion of carbonates and bicarbonates in the investigated ash products had remarkable features, making them viable resources. All ash materials showed a significant ability for Ca ion elimination at high initial Ca ion concentrations. A slight quantity of ash (10 g/L) was sufficient for usage on very hard water contents up to 3000 ppm. Finally, the tested agro-ash was free of cost. Furthermore, unlike other conventional precipitants, such as NaOH, Ca(OH)₂, NaHCO₃, Na₂CO₃, and CaO, they are cost effective and ecologically sustainable. There is no need to employ any additional chemicals or modify the agro-ash materials throughout the treatment process. The benefits of the manufactured ash were assessed using a SWOT analysis.     

The Multifaceted Role of Curcumin in Advanced Nanocurcumin Form in the Treatment and Management of Chronic Disorders

Curcumin is the primary polyphenol in turmeric’s curcuminoid class. It has a wide range of therapeutic applications, such as anti-inflammatory, antioxidant, antidiabetic, hepatoprotective, antibacterial, and anticancer effects against various cancers, but has poor solubility and low bioavailability. Objective: To improve curcumin’s bioavailability, plasma concentration, and cellular permeability processes. The nanocurcumin approach over curcumin has been proven appropriate for encapsulating or loading curcumin (nanocurcumin) to increase its therapeutic potential. Conclusion: Though incorporating curcumin into nanocurcumin form may be a viable method for overcoming its intrinsic limitations, and there are reasonable concerns regarding its toxicological safety once it enters biological pathways. This review article mainly highlights the therapeutic benefits of nanocurcumin over curcumin.     

A theoretical approach to the thermochemistry of the polymerization of some derivatives of the monomers CH2X (X = CH2, NH,O)

In this work, we have calculated the thermodynamic parameters of the polymerization of some derivatives of the species CH₂X (X = CH₂, NH, O), using ab initio methods of quantum chemistry and the usual formalism of statistical thermodynamics. It is shown that the Gibbs functions ΔG(l, c) corresponding to CH₂NOCH₃, CNCHNCN, CF₂O and all the percyano derivatives are largely positive which indicates that the spontaneous (radical or ionic) chain polymerization of these monomers is thermodynamically prohibited.     

An assessment of the impact of construction work on fine particulate matter in the University of Jordan: A PIXE study

Aerosol sampling was carried out prior to and during an active construction work at the University of Jordan in Amman, Jordan. Elemental characterization for 60 PM_2.5 samples was performed by particle-induced X-ray emission (PIXE) technique at the LABEC laboratory of INFN in Florence, Italy. Twenty three elements (Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, Zr, Ba, and Pb) were detected, and their concentrations were assessed during three sampling periods, namely, “No Construction,” “Pouring Concrete,” and “Bleaching.” The results showed higher concentrations of soil-related elements and lower concentrations of anthropogenic-related elements during construction periods compared with their concentrations before construction. Soil-related elements showed very low enrichment factor (EF) and high correlation coefficients during all sampling periods. Anthropogenic-related elements were very much enriched and correlated only during the first sampling period “No Construction.”     

Impaction of spray droplets on leaves: influence of formulation and leaf character on shatter,bounce and adhesion

This paper combines experimental data with simple mathematical models to investigate the influence of spray formulation type and leaf character (wettability) on shatter, bounce and adhesion of droplets impacting with cotton, rice and wheat leaves. Impaction criteria that allow for different angles of the leaf surface and the droplet impact trajectory are presented; their predictions are based on whether combinations of droplet size and velocity lie above or below bounce and shatter boundaries. In the experimental component, real leaves are used, with all their inherent natural variability. Further, commercial agricultural spray nozzles are employed, resulting in a range of droplet characteristics. Given this natural variability, there is broad agreement between the data and predictions. As predicted, the shatter of droplets was found to increase as droplet size and velocity increased, and the surface became harder to wet. Bouncing of droplets occurred most frequently on hard-to-wet surfaces with high-surface-tension mixtures. On the other hand, a number of small droplets with low impact velocity were observed to bounce when predicted to lie well within the adhering regime. We believe this discrepancy between the predictions and experimental data could be due to air layer effects that were not taken into account in the current bounce equations. Other discrepancies between experiment and theory are thought to be due to the current assumption of a dry impact surface, whereas, in practice, the leaf surfaces became increasingly covered with fluid throughout the spray test runs.     

Solid State Structure of 6,7-Dihydro-1,4-Di(2′-Pyridyl)-5<Emphasis Type="Italic">H</Emphasis>-Cyclopenta[d]Pyridazine

Abstract  The X-ray structure of 6,7-dihydro-1,4-di(2′-pyridyl)-5H-cyclopenta[d]pyridazine ligand (5-dppn) shows the existence of a trans/trans conformation. The 5-dppn crystallizes in a triclinic space group P-1 with a = 7.1048(15) ?; b = 9.008(2) ?; c = 10.986(3) ?; α = 88.279(16)°; β = 85.454(15)°; γ = 69.104(12)°; V = 654.7(3) ?³ and Z = 2. The analysis of 5-dppn crystal structure demonstrates the presence of edge-edge Ar–H···N and face-face Aliph-H···N centrosymmetric dimer interactions. The unit cell packing arrangement confirmed the presence of two molecules opposite to each other. Index Abstract  The X-ray structure of 6,7-dihydro-1,4-di(2′-pyridyl)-5H-cyclopenta[d]pyridazine ligand (5-dppn) shows the existence of a trans/trans conformation.      

Palladium(ii) driven self-assembly of a saturated quadruple-stranded metallo helicate

Complexation of the bridging bidentate ligand N,N'-(pyridine-2,6-diyl)dinicotinamide, L with palladium(ii) resulted in a single discrete M(2)L(4) self-assembly, 1, in a quantitative manner. The entropically-controlled assembly of 1 resulted in a rare saturated, quadruple-stranded metallo-helicate, in which both the left-handed (M) and right-handed (P) helicates exist in the crystal structure.     

A novel and facile reaction to N6‐alkylated adenosine via benzotriazole as a synthetic auxiliary

The reaction of benzotriazole with aliphatic, aromatic or heteroaromatic aldehyde and adenosine leads to a benzotriazole adduct which is reduced with sodium borohydride to the corresponding N⁶‐alkylated adenosine derivatives. This procedure is also utilized in a new route to N⁶‐(3‐iodobenzyl)adenosine‐5′‐N‐methyluronamide (IB‐MECA) which is considered an important adenosine agonist at A₃ adenosine receptors.