Confined growth of lithium manganese oxide nanoparticles

Nanostructures of single crystallites of spinel LiMn₂O₄ (LMO) were prepared by the simple pyrolysis of aqueous solution of LiNO₃ and Mn(NO₃)₂ in a confined space such as either droplets or mesopores. When the mixed nitrate solution was spray pyrolyzed at temperatures below 700 °C, 1-μm LMO spheres were obtained consisting of ~20-nm single crystallites randomly packed. Such LMO phase, once obtained, would sustain for further heat-treatment. Next, new spraying solution was prepared by adding the precursor for mesoporous silica (MPS) to the nitrates solution. By spray pyrolyzing such solution, LMO was impregnated inside pores of the MPS being structured. The silica could be removed by subsequent NaOH treatment to leave spherical LMO mesophase. The nitrates was also able to soak into the existing MPS having cylindrical pores and form short isolated LMO chains in the mesopores by the subsequent heating. After the same NaOH treatment, the LMO phase turned into bundles of very ‘long’, and often straight, chains, consisting of 8-nm LMO nanoparticles. This will be elucidated through further study.     

Ruthenium‐Catalyzed Reductive Arylation of N‐(2‐Pyridinyl)amides with Isopropanol and Arylboronate Esters

A new three‐component reductive arylation of amides with stable reactants (iPrOH and arylboronate esters), making use of a 2‐pyridinyl (Py) directing group, is described. The N‐Py‐amide substrates are readily prepared from carboxylic acids and PyNH₂, and the resulting N‐Py‐1‐arylalkanamine reaction products are easily transformed into the corresponding chlorides by substitution of the HN‐Py group with HCl. The 1‐aryl‐1‐chloroalkane products allow substitution and cross‐coupling reactions. Therefore, a general protocol for the transformation of carboxylic acids into a variety of functionalities is obtained. The Py‐NH₂ by‐product can be recycled.     

Use of electrophoretic techniques and MALDI–TOF MS for rapid and reliable characterization of bacteria: analysis of intact cells, cell lysates, and “washed pellets”

In this study electrophoretic and mass spectrometric analysis of three types of bacterial sample (intact cells, cell lysates, and “washed pellets”) were used to develop an effective procedure for the characterization of bacteria. The samples were prepared from specific bacterial strains. Five strains representing different species of the family Rhizobiaceae were selected as model microorganisms: Rhizobium leguminosarum bv. trifolii, R. leguminosarum bv. viciae, R. galegae, R. loti, and Sinorhizobium meliloti. Samples of bacteria were subjected to analysis by four techniques: capillary zone electrophoresis (CZE), capillary isoelectric focusing (CIEF), gel IEF, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI–TOF MS). These methods are potential alternatives to DNA-based methods for rapid and reliable characterization of bacteria. Capillary electrophoretic (CZE and CIEF) analysis of intact cells was suitable for characterization of different bacterial species. CIEF fingerprints of “washed pellets” and gel IEF of cell lysates helped to distinguish between closely related bacterial species that were not sufficiently differentiated by capillary electrophoretic analysis of intact cells. MALDI–TOF MS of “washed pellets” enabled more reliable characterization of bacteria than analysis of intact cells or cell lysates. Electrophoretic techniques and MALDI–TOF MS can both be successfully used to complement standard methods for rapid characterization of bacteria.     

Effect of supercritical water on the stability and activity of alkaline carbonate catalysts in coal gasification

The stability and activity of alkaline carbonate catalysts in supercritical water coal gasification has been investigated using density functional theory method.Our calculations present that the adsorption of Na₂CO₃ on coal are more stable than that of K2CO3,but the stability of Na₂CO₃ is strongly reduced as the cluster gets larger.In supercritical water system,the dispersion and stability of Na₂CO₃ catalyst on coal support is strongly improved.During coal gasification process,Na₂CO₃ transforms with supercritical water into NaOH and NaHCO₃,which is beneficial for hydrogen production.The transformation process has been studied via thermodynamics and kinetics ways.The selectively catalytic mechanism of NaOH and the intermediate form of sodium-based catalyst in water-gas shift reaction for higher hydrogen production has also been investigated.Furthermore,NaOH can transform back to Na₂CO₃ after catalyzing the water-gas shift reaction.Thus,the cooperative effects between supercritical water and Na₂CO₃ catalyst form a benignant circle which greatly enhances the reaction rate of coal gasification and promotes the production of hydrogen.     

An efficient synthesis of 2-substituted 6-methylpurine bases and nucleosides by Fe- or Pd-catalyzed cross-coupling reactions of 2,6-dichloropurines

Fe-catalyzed cross-coupling reactions of 9-substituted or protected 2,6-dichloropurines with 1 equiv of methylmagnesium chloride gave regioselectively 2-chloro-6-methylpurines in good yields. The same reactions with 3 equiv of methylmagnesium chloride or Pd-catalyzed reactions with trimethylaluminum afforded 2,6-dimethylpurines. The 2-chloro-6-methylpurines underwent another coupling with phenylboronic acid to give 6-methyl-2-phenylpurines. All reactions were perfomed for Bn- and THP-protected purine bases as well as for acyl-protected ribosides and 2-deoxyribosides. After deprotection, free purine bases and nucleosides were obtained.     

Enhanced acidity, photophysical properties and liposome binding of perfluoroalkylated phthalocyanines lacking C-H bonds

The acid-base, spectroscopic, photophysical and liposome-binding properties of the recently synthesized free base, 29H,31H,1,4,8,11,15,18,22,25-octafluoro-2,3,9,10,16,17,23, 24-octakisperfluoro(isopropyl) phthalocyanine, F64PcH2, are reported. The perfluoroalkylation of the phthalocyanine core renders the hydrogen atoms acidic, with a pK(a) = 6. The F64Pc(-2) dianion is detected already at pH 3, by singular-value decomposition analysis of electronic spectra. F64Pc(-2) generates 1O2 with quantum yields phi(delta) = 0.252 (in MeOH) and 0.019 in liposomes. Metallation of the Pc macrocycle to yield F64PcZn increases phi(delta) to 0.606 and 0.126 in MeOH and liposomes, respectively. Surprisingly, F64Pc(-2) (but not F64PcH2 or F64PcZn) binds strongly to liposomes, with a binding constant K(b) = 25 (mg/mL)(-1). The fully protonated F64PcH2, but not the zwitterionic F64Pc(-2), might favor hydrogen bonding, thus reducing its lipophilicity. Similarly, the Lewis acidity of Zn in F64PcZn, and thus its ability to bind water within a hydrophobic perfluoroalkyl pocket, is significantly enhanced by the fluorinated substituents.     

Determination of lignans in Schisandra chinensis using micellar electrokinetic capillary chromatography

Micellar electrokinetic capillary chromatography (MEKC) has been developed as a promising method for the determination of lignans in plant samples. The separation conditions have been optimized with respect to the different parameters including sodium dodecyl sulfate (SDS) and acetonitrile concentration, pH of the background electrolyte, separation voltage, and capillary temperature. The background electrolyte consisting of 40 mM SDS and 35% acetonitrile in 10 mM tetraborate buffer (pH 9.3) was found to be the most suitable electrolyte for this analysis. The applied voltage of 28 kV (positive polarity) and the capillary temperature 25 degrees C gave the best separation of lignans. The interday reproducibility of the peak areas and the migration times was below 2.0%. The results of MEKC analyses were compared with those obtained by capillary electrochromatography (CEC) and reversed-phase high-performance liquid chromatography (RP-HPLC). The possibilities of using this method for the determination of lignans in drug and in serum samples were also tested.     

Preparation of phosphinoferrocene carboxamides from isocyanates. Synthesis and structural characterisation of palladium(II) and platinum(II) complexes with 1′-(diphenylphosphino)-1-(N-phenylcarbamoyl)ferrocene

The reaction of in situ generated 1′-(diphenylphosphino)-1-lithioferrocene with isocyanates RNCO affords the respective phosphino-carboxamides Ph₂PfcCONHR (fc = ferrocene-1,1′-diyl, R = cyclohexyl (2), and Ph (3)) in moderate yields. The coordination behaviour of 3 chosen as a representative was studied in palladium(II) and platinum(II) complexes. Depending on the metal precursor and the reaction conditions, the following compounds featuring this ligand as a P-monodentate or an O,P-chelating donor were isolated and characterised by spectroscopic methods (IR, multinuclear NMR and electrospray ionisation MS): trans-[PdCl₂(3-κP)₂] (5), trans-[PtCl₂(3-κP)₂] (6), cis-[PtCl₂(3-κP)₂] (7), [SP-4-4]-[(L^NC)PdCl(3-κP)] (8; L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), and [SP-4-3]-[(L^NC)PdCl(3-κ²O,P)]SbF₆ (9). Besides, the crystal structures of a phosphine oxide resulting by oxidation of 2, viz Ph₂P(O)fcCONHCy (4), and of complexes 5·2Et₂O and 9 have been determined by single-crystal X-ray diffraction analysis.     

S-alkylation of thiacalixarenes: how the regio- and stereoselectivities depend on the starting conformation

S-alkylation of all four thiacalix[4]arene conformations was accomplished using alkyl triflates. The corresponding sulfonium salts are formed in a highly regio- and stereoselective manner depending on the conformation used. Interestingly, only mono- or disubstituted sulfonium salts can be prepared. Although many regio- and stereoisomers are theoretically possible, only one dialkylated cone and 1,2-alternate derivatives were formed, while only a single isomer of monoalkylated partial cone and 1,3-alternate were isolated. The combination of experimental results with the quantum-chemical approach using the B3LYP/6-311G(d,p) method resulted in the elucidation of the rules governing the regio- and stereochemical outcomes of the alkylation reactions. All S-alkylated compounds represent a novel type of substitution pattern in calixarene chemistry showing the wide-ranging possibility of thiacalixarene skeleton modifications.     

Two new noncentrosymmetric (NCS) polar oxides: syntheses, characterization, and structure-property relationships in BaMTe2O7 (M = Mg2+ or Zn2+)

Two new noncentrosymmetric (NCS) polar oxides, BaMgTe(2)O(7) and BaZnTe(2)O(7), have been synthesized and characterized, with their crystal structures determined by single crystal X-ray diffraction. The iso-structural materials exhibit structures consisting of layers of corner-shared MgO(5) or ZnO(5), Te(6+)O(6), and Te(4+)O(4) polyhedra that are separated by Ba(2+) cations. The Te(4+) cation is found in a highly asymmetric and polar coordination environment attributable to its stereoactive lone-pair. The alignment of the individual TeO(4) polar polyhedra results in macroscopic polarity for BaMgTe(2)O(7) and BaZnTe(2)O(7). Powder second-harmonic generation (SHG) measurements revealed a moderate SHG efficiency of approximately 5 × KDP (or 200 × α-SiO(2)) for both materials. Piezoelectric charge constants of 70 and 57 pm/V, and pyroelectric coefficients of -18 and -10 μC·m(-2)·K(-1) were obtained for BaMgTe(2)O(7) and BaZnTe(2)O(7), respectively. Although the materials are polar, frequency dependent polarization measurements indicated that the materials are not ferroelectric, that is, the observed macroscopic polarization cannot be reversed. Infrared, UV-vis diffuse spectroscopy, and thermal properties were also measured. Crystal data: BaMgTe(2)O(7), orthorhombic, space group Ama2 (No. 40), a = 5.558(2) ?, b = 15.215(6) ?, c = 7.307(3) ?, V = 617.9(4) ?(3), and Z = 4; BaZnTe(2)O(7), orthorhombic, space group Ama2 (No. 40), a = 5.5498(4) ?, b = 15.3161(11) ?, c = 7.3098(5) ?, V = 621.34(8) ?(3), and Z = 4.