Cycloaddition reactions of benzyne with olefins

Some novel cycloaddition reactions based on benzyne and olefins have been developed.These reactions were performed in the absence of a transition metal catalyst,and they displayed good yields.These cycloaddition reactions of benzyne with olefins provide effective routes for synthesizing benzocyclobutenes,biaryl compounds and 9,10-dihydrophenanthrene derivatives.     

Synergistic effect of W and P on ZSM-5 and its catalytic performance in the cracking of heavy oil

In order to develop the conversion of heavy oil with a high yield of propylene in the catalytic cracking process, ZSM-5 zeolite was modified by tungsten and phosphorus, which was proved to be an effective method. Characterization results show that the improvement of catalytic performance could be correlated to the interaction of phosphorus and tungsten species on ZSM-5. P inhibited the aggregation of tungsten species on ZSM-5 and was conductive to convert the tungsten species with octahedral coordination into tetrahedral coordination. And this ultimately led to that more acid sites were reserved after hydrothermal treatment in the tungsten and phosphorus co-modified ZSM-5 catalyst. Phosphorus species played an important role to restrain the dehydrogenation activity of tungsten. In addition, a model reflecting the interaction between tungsten species and ZSM-5 framework was proposed.     

Effect of the graphitic degree of carbon supports on the catalytic performance of ammonia synthesis over Ba-Ru-K/HSGC catalyst

A series of high surface area graphitic carbon materials （HSGCs） were prepared by ball-milling method. Effect of the graphitic degree of HSGCs on the catalytic performance of Ba-Ru-K/HSGC-x （x is the ball-milling time in hour） catalysts was studied using ammonia synthesis as a probe reaction. The graphitic degree and pore structure of HSGC-x supports could be successfully tuned via the variation of ball-milling time. Ru nanoparticles of different Ba-Ru-K/HSGC-x catalysts are homogeneously distributed on the supports with the particle sizes ranging from 1.6 to 2.0 nm. The graphitic degree of the support is closely related to its facile electron transfer capability and so plays an important role in improving the intrinsic catalytic performance of Ba-Ru-K/HSGC-x catalyst.     

Radical polymerization of methyl methacrylate with 2,2,3-triphenylpropanoic acid as an initiator

An unsymmetrical compound, 2,2,3-triphenylpropanoic acid (TPPA), was successfully prepared from phenyllithium, 1,1-diphenylethylene (DPE), gas carbon dioxide (CO₂), and aqueous standard solution of hydrochloric acid with LiCl deprivation. Characterization of the compound was performed by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy. The polymerization of methyl methacrylate (MMA) was performed in the presence of TPPA at 95 °C. The free radicals obtained were characterized by ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC/Q-TOF MS). Gel permeation chromatography (GPC) traces of the average molecular weight of poly(MMA) (PMMA) showed a series of translations with increasing time. The average molecular weight of PMMA indicated narrow polydispersity, and an approximately linear relationship was found between ln ([M]₀/[M]) and polymerization time.

Aggregation behavior of pH- and thermo-responsive block copolymer protected gold nanoparticles

Two distinctive block copolymers protected gold nanoparticles (AuNPs) were prepared with poly(methylacrylic acid)-block-poly(N-isopropylacrylamide) (SH-PMAA₆₄-b-PNIPAM₃₅) and poly (N-isopropylacrylamide)-block-poly(methylacrylic acid) (SH-PNIPAM₄₀-b- PMAA₆₀) through strong gold-sulfur bonding. The hybrid NPs have a pH-responsive inner shell (or corona) and a thermo-responsive corona (or inner shell) due to different location relations of the PNIPAM and PMAA on the surface of AuNPs. Then, the aggregation behaviors, as well as the changes of optical properties, of two hybrid NPs were compared in response to both stimuli. The results showed the obvious inter-particle aggregation caused by the phase transition for hydrophobic coronal polymer. However, the particles of hydrophilic corona layer retained good dispersion and the pH-responsive or thermo-responsive characteristics of shell layer made relatively minor changes.     

Synthesis and surface properties of self-crosslinking core–shell acrylic copolymer emulsions containing fluorine/silicone in the shell

Stable emulsions of a core–shell acrylic copolymer (non-crosslinkable V0, and crosslinkable V2, V4, V6, and V8, where the numbers indicate the wt% of crosslinking agent based on the total acrylate monomer content) containing butyl acrylate (BA, 45 wt%), glycidyl methacrylate (GMA, 45 wt%), heptadecafluorodecyl methacrylate (PFA, 10 wt%), and various contents of crosslinking agent (vinyltriethoxysilane, VTES) were synthesized using a three-stage seeded emulsion polymerization process with a small amount of surfactant. The average particle size and viscosity of emulsions increased significantly with increasing VTES content. This study examined the effects of the VTES content on the surface/mechanical properties of self-crosslinked copolymer film samples containing a fixed acrylate monomer content to find the optimum VTES content. XPS showed that the film–air surface of the copolymer samples had a higher fluorine/silicone content than the film–dish interface. The tensile strength/modulus, thermal stability, and two Tgs (α and β Tgs) of the film samples increased significantly with increasing VTES content. The contact angle of the film samples increased with increasing VTES content up to approximately 6 wt%, and then decreased slightly. The optimum VTES content was approximately 6 wt% based on the total acrylate monomer content to obtain a high water/oil repellent coating material (V6) with the highest water/methylene iodide-contact angles (118.2°/81.8°) and lowest surface energy (18.4 mN/m).     

Apoptosis in BEL-7402 cells induced by ruthenium(II) complexes through a ROS-mediated mitochondrial pathway

Three Ru(II) polypyridyl complexes [Ru(dmb)₂(HMSPIP)](ClO₄)₂ (1), [Ru(phen)₂(HMSPIP)](ClO₄)₂ (2) and [Ru(dmp)₂(HMSPIP)](ClO₄)₂ (3) were synthesized and characterized. The cytotoxicity in vitro, apoptosis, cell cycle arrest, reactive oxygen species and mitochondrial membrane potential were assayed. The IC₅₀ values of complexes 1, 2 and 3 toward BEL-7402, A549, MG-63 and SK-BR-3 cell lines ranged from 10.9 ± 1.6 to 42.0 ± 3.4 μM. Complexes 1, 2 and 3 can effectively induce apoptosis and inhibit the growth of BEL-7402 cells at the G2/M phase. These complexes can enhance the level of reactive oxygen species and induce decrease in the mitochondrial membrane potential. Additionally, complex 2 can down-regulate the expression of antiapoptotic protein of Bcl-2 protein and up-regulate the levels of proapoptotic protein Bim in BEL-7402 cells.     

Benzidine/Quinoidal-Benzidine-Linked,Superbenzene-Based π-Conjugated Chiral Macrocycles and Cyclophanes

Synthesis of fully conjugated cyclophanes containing large-size polycyclic aromatics is challenging. Now, three benzidine-linked, hexa-peri-hexabenzocoronene (superbenzene)-based ortho-, para-, and meta-cyclophanes are synthesized through intermolecular Yamamoto coupling reaction of structurally pre-organized precursors. Subsequent oxidative dehydrogenation gave the corresponding quinoidal benzidine-linked cyclophanes. Their geometries were confirmed by X-ray crystallographic analysis and their electronic properties were investigated by electronic absorption, cyclic voltammetry, and DFT calculations. The quinoidal benzidine-linked cyclophanes show thermally populated paramagnetic activity with a relatively large singlet-triplet energy gap. Two enantiomers for the ortho-cyclophanes ( 1-NH and 1-N ) were isolated and their chiral figure-of-eight macrocyclic structures were identified. The cage-like cyclophanes 2-NH and 3-NH with concave surface can selectively encapsulate fullerene C₇₀.     

Redox Dyshomeostasis Strategy for Hypoxic Tumor Therapy Based on DNAzyme-Loaded Electrophilic ZIFs

Redox homeostasis is one of the main reasons for reactive oxygen species (ROS) tolerance in hypoxic tumors, limiting ROS-mediated tumor therapy. Proposed herein is a redox dyshomeostasis (RDH) strategy based on a nanoplatform, FeCysPW@ZIF-82@CAT Dz, to disrupt redox homeostasis, and its application to improve ROS-mediated hypoxic tumor therapy. Once endocytosed by tumor cells, the catalase DNAzyme (CAT Dz) loaded zeolitic imidazole framework-82 (ZIF-82@CAT Dz) shell can be degraded into Zn²⁺ as cofactors for CAT Dz mediated CAT silencing and electrophilic ligands for glutathione (GSH) depletion under hypoxia, both of which lead to intracellular RDH and H₂O₂ accumulation. These “disordered” cells show reduced resistance to ROS and are effectively killed by ferrous cysteine-phosphotungstate (FeCysPW) induced chemodynamic therapy (CDT). In vitro and in vivo data demonstrate that the pH/hypoxia/H₂O₂ triple stimuli responsive nanocomposite can efficiently kill hypoxic tumors. Overall, the RDH strategy provides a new way of thinking about ROS-mediated treatment of hypoxic tumors.     

Constructing a Super-Saturated Electrolyte Front Surface for Stable Rechargeable Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries (RAZB) have been re-evaluated because of the superiority in addressing safety and cost concerns. Nonetheless, the limited lifespan arising from dendritic electrodeposition of metallic Zn hinders their further development. Herein, a metal–organic framework (MOF) was constructed as front surface layer to maintain a super-saturated electrolyte layer on the Zn anode. Raman spectroscopy indicated that the highly coordinated ion complexes migrating through the MOF channels were different from the solvation structure in bulk electrolyte. Benefiting from the unique super-saturated front surface, symmetric Zn cells survived up to 3000 hours at 0.5 mA cm⁻², near 55-times that of bare Zn anodes. Moreover, aqueous MnO₂–Zn batteries delivered a reversible capacity of 180.3 mAh g⁻¹ and maintained a high capacity retention of 88.9 % after 600 cycles with MnO₂ mass loading up to 4.2 mg cm⁻².