Further Acceleration of MeV Electrons by a Relativistic Laser Pulse

With the development of photocathode rf electron gun, electrons with high-brightness and mono-energy can be obtained easily. By numerically solving the relativistic equations of motion of an electron generated from this facility in laser fields modelled by a circular polarized Gaussian laser pulse, we find the electron can obtain high energy gain from the laser pulse. The corresponding acceleration distance for this electron driven by the ascending part of the laser pulse is much longer than the Rayleigh length, and the light amplitude experienced on the electron is very weak when the laser pulse overtakes the electron. The electron is accelerated effectively and the deceleration can be neglected. For intensities around 10¹⁹ W•μm²/cm², an electron's energy gain near 0.1 GeV can be realized when its initial energy is 4.5 MeV, and the final velocity of the energetic electron is parallel with the propagation axis. The energy gain can be up to 1 GeV if the intensity is about 10²¹ W•μm²/cm². The final energy gain of the electron as a function of its initial conditions and the parameters of the laser beam has also been discussed.     

Characteristics of an add-drop filter composed of a Mach-Zehnder interferometer and double ring resonators

A planar lightwave circuit (PLC) add-drop filter is proposed and analyzed, which consists of a symmetric Mach-Zehnder interferometer (MZI) combined with double microring resonators. A critical coupling condition is derived for a better box-like drop spectrum. Comparisons of its characteristics with other schemes,such as a MZI with a single ring resonator, are presented, and some of the issues about device design and fabrication are also discussed.     

Energy spectrum of fermionized bosonic atoms in optical lattices

We investigate the energy spectrum of fermionized bosonic atoms, which behave very much like spinless noninteracting fermions, in optical lattices by means of the perturbation expansion and the retarded Green's function method. The results show that the energy spectrum splits into two energy bands with single-occupation; the fermionized bosonic atom occupies nonvanishing energy state and left hole has a vanishing energy at any given momentum, and the system is in Mott-insulating state with a energy gap.Using the characteristic of energy spectra we obtained a criterion with which one can judge whether the Tonks-Girardeau (TG) gas is achieved or not.     

Bandgap engineering of self-assembled InAs quantum dots with a thin AlAs barrier

We investigate the effects of a thin AlAs layer with different position and thickness on the optical properties of InAs quantum dots (QDs) by using transmission electron microscopy and photoluminescence (PL). The energy level shift of InAs QD samples is observed by introducing the thin AlAs layer without any significant loss of the QD qualities. The emission peak from InAs QDs directly grown on the 4 monolayer (ML) AlAs layer is blueshifted from that of reference sample by 219 meV with a little increase in FWHM from 42–47 meV for ground state. In contrast, InAs QDs grown under the 4 ML AlAs layer have PL peak a little redshifted to lower energy by 17 meV. This result is related to the interdiffusion of Al atom at the InAs QDs caused by the annealing effect during growing of InAs QDs on AlAs layer.     

A fractional order hyperchaotic system derived from Liu system and its circuit realization

In this paper we propose a novel four-dimensional fractional order hyperchaotic system derived from Liu system. Electronics workbench (EWB) and Matlab simulations show the dynamical behavior of the proposed four-dimensional fractional order hyperchaotic system. Finally, after separately using EWB and Matlab, an electronic circuit is designed to realize the novel four-dimensional fractional order hyperchaotic system and the experimental circuit results are obtained which are identical to software simulations.     

金属催化制备石墨烯的研究进展

石墨烯作为一种新兴的碳素材料,从一出现就引起了众多学者的关注.石墨烯具有许多新奇的特性,使得石墨烯在光电领域及微电子工业等有极大的应用潜力.但是目前难以实现大尺寸、高质量、宏量石墨烯的可控制备,限制了石墨烯的广泛应用.本文分析了各种石墨烯制备方法的利弊,重点从层数控制及大面积制备等方面对金属催化法进行了阐述,固态碳源金属催化法可以实现宏量制备大尺寸、高质量、薄且均匀的石墨烯.综述了金属催化制备石墨烯的相关机理研究,指出了目前研究的局限,并对石墨烯相变机理的下一步研究方向进行了展望.     

基于贝叶斯序贯方法的微波效应实验设计

提出了一种基于贝叶斯验后概率的序贯检验方法,建立了检验的判别准则,给出了判别准则临界值的计算方法。在给定截尾实验次数的条件下,提出了一种截尾方案,建立了截尾判断方法。将其用于解决验证效应物在微波作用下失效概率达到给定水平的微波效应实验设计问题,给出了相应的实验方案和所需样本量的估计。最后,通过实例对上述方法的应用过程进行了说明,并和现有方法进行了分析比较。     

声光可调近红外光谱技术快速检测再造烟叶的厚度

厚度是衡量再造烟叶品质及稳定性的一项重要指标,目前再造烟叶厚度测定方法存在读数不稳定、测量准确性受样品特性影响,不利于检测和控制.本文应用声光可调滤光器近红外光谱仪建立再造烟叶厚度检测方法模型,能准确预测再造烟叶厚度指标,具有准确性好,精密度高的特点,符合再造烟叶厚度检测的需要.     

光滑粒子流体动力学方法固壁处理的一种新型排斥力模型

与传统网格法相比, 光滑粒子流体动力学方法不能直接施加壁面边界条件, 这就限制了该方法在工程中的应用.为此, 本文基于Galerkin加权余量法并结合传统排斥力方法, 推导出一种新的排斥力公式来施加壁面边界条件.该方法不含未知参数, 能在不减小边界粒子尺寸的情形下有效地防止流体粒子穿透壁面, 同时可避免邻近边界的流体粒子的速度及压力振荡. 分别通过静止液柱算例、液柱坍塌算例、容器中液体静止算例及溃坝算 例来验证本文方法的有效性, 并与传统边界处理方法进行对比, 结果表明: 本文方法克服了传统方法存在的缺陷, 是一种有效的固壁边界处理方法. 关键词： 光滑粒子流体动力学法 固壁边界 排斥力 加权余量法