A numerical study of time-dependent schr?dinger equation for multiphoton vibrational interaction of NO molecule, modelled as Morse oscillator, with intense far-infrared femtosecond lasers

For the NO molecule, modelled as a Morse oscillator, time-dependent (TD) nuclear Schr?dinger equation has been numerically solved for the multiphoton vibrational dynamics of the molecule under a far-infrared laser of wavelength 10503 nm, and four different intensities,I = 1 × 10⁸, 1 × 10¹³, 5 × 10¹⁶, and 5 × 10¹⁸ W cm⁻² respectively. Starting from the vibrational ground state at zero time, various TD quantities such as the norm, dissociation probability, potential energy curve and dipole moment are examined. Rich high-harmonics generation (HHG) spectra and above-threshold dissociation (ATD) spectra, due to the multiphoton interaction of vibrational motions with the laser field, and consequent elevation to the vibrational continuum, have been obtained and analysed. Dedicated to Professor C N R Rao on his 70th birthday An erratum to this article is available at .     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Non-destructive analysis of archeological samples by energy-dispersive X-ray fluorescence

Summary A non-destructive method is described for the determination of major and minor constituents in archeological specimens by energy-dispersive X-ray fluorescence. Homogeneity tests are made by measuring at various sites of the specimen. In the same way, mean values are obtained for inhomogeneous specimen without taking samples. For calibration, powder standards are used. In case of the determination of elements with numbers up to 14 (Si) a vacuum chamber is used and the dimensions of the specimens are limited by the dimensions of that vacuum chamber, whereas for the determination of elements from K up to U specimens of any size, form or weight are suitable.

---

Zerstörungsfreie Analyse von archäologischen Proben mit Hilfe der Energie-dispersiven Röntgenfluorescenzanalyse

Zusammenfassung Eine zerstörungsfreie Methode für die Bestimmung von Haupt- und Nebenbestandteilen in archäologischen Proben mit Hilfe der Energie-dispersiven Röntgenfluorescenzanalyse wird beschrieben. Für Homogenitätstests wird an mehreren Stellen der Probe gemessen. In der gleichen Weise werden für inhomogene Proben Mittelwerte erhalten ohne Probenahme. Für die Eichung werden Pulverstandards verwendet. Im Falle der Bestimmung von Elementen mit Ordnungszahlen bis 14 (Si) wird eine Vakuumkammer eingesetzt, und die Dimensionen der Proben sind durch die Dimensionen dieser Vakuumkammer begrenzt, während für die Bestimmung der Elemente K bis U Proben jeder Größe, jeder Form oder jeden Gewichts verwendbar sind.

     

Solvothermal synthesis of TiO2: anatase nanocrystals and rutile nanofibres from TiCl4 in acetone

This work reports a new synthetic approach for single‐phase TiO₂ nanomaterials by solvothermal treatment of titanium tetrachloride in acetone at 80–110 °C. Small, uniform, and yet size‐tunable (5–10 nm) anatase titania nanocrystallites were obtained using a low concentration of TiCl₄ in acetone (i.e., at molar ratios of TiCl₄/acetone ≤ 1:15) in the temperature range of 80–110 °C, while rutile nanofibers were synthesized using a high concentration of TiCl₄ (e.g., TiCl₄/acetone = 1:10) at 110 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

Determination of residual solvents in a transdermal system by means of headspace gas chromatography

Summary Pharmaceutical products have to be tested for impurities including residual solvents. This is also required in production control. The simplest solution to this problem is headspace gas chromatography. This paper describes the determination of residual volatile hydrocarbons in the transdermal system DEPONIT by only one headspace measurement. Accuracy is ensured by the multiple headspace extraction technique.

---

Bestimmung von Restlösungsmittelgehalten in einem transdermalen System durch Headspace-Gas-Chromatographie

Zusammenfassung Pharmazeutische Produkte müssen auf Verunreinigungen geprüft werden, auch auf Restlösungsmittelgehalte. Ein zusätzlicher Grund ist die fortlaufende Kontrolle der Herstellung. Die einfachste Möglichkeit für dieses Problem ist die Bestimmung durch Headspace-Gas-Chromatographie. Dieser Artikel beschreibt die Bestimmung von noch vorhandenen flüchtigen Kohlenwasserstoffen in dem transdermalen System DEPONIT durch nur eine Headspace-Messung. Die Richtigkeit ist durch die Anwendung der Mehrfach-Gasextraktionstechnik sichergestellt.

     

A new group of fluorescent pH-indicators for an extended pH-range

Summary The pH versus fluorescence intensity profiles of a series of new pH-indicators are reported. They are characterized by two pK_a-values in the 3.7–4.9 and 6.9–7.9 range, respectively. The strong change in fluorescence intensity with pH allows the determination of pH's over a much wider range (typically 2–9) than with one-step indicators. They are therefore considered to be of potential utility for measurement of pH over the neutral and slightly acidity range which occurs, for instance, in bioliquids such as urine.

---

Eine neue Gruppe fluorescierender pH-Indicatoren für einen erweiterten pH-Bereich

Zusammenfassung Die Fluorescenzintensitätsprofile als Funktion des pH-Wertes einer Reihe von neuen pH-Indicatoren werden untersucht. Sie sind charakterisiert durch zwei pK_a-Werte im Bereich 3,7–4,9 bzw. 6,9–7,9. Die gefundene starke Änderung der Fluorescenzintensität mit dem pH-Wert erlaubt eine pH-Bestimmung über einen viel weiteren Bereich (typischerweise 2 – 9) als mit einstufigen Indicatoren. Aus diesem Grund werden sie als potentiell nützlich angesehen zur Messung von pH-Werten im neutralen und schwach sauren Bereich, wie er z.B. in biologischen Flüssigkeiten, etwa im Urin, gegeben ist.