Depigmenting activity and low cytotoxicity of alkoxy benzoates or alkoxy cinnamte in cultured melanocytes

To obtain effective and safe topical depigmenting agents, we synthesized hydroxybenzoates, alkoxybenzoates, and 3,4,5-trimethoxycinnamate containing a thymol moiety and screened then for high-level inhibitory activity against melanin synthesis in cultured melanocytes. Eight compounds were tested for their depigmenting effect and cytotoxicity using a murine melanocyte cell line. We found that 3,4,5-trialkoxybenzoates and 3,4,5-trimethoxycinnamate, synthesized by conjugating 3,4,5-trialkoxybenzoic acids and 3,4,5-trimethoxycinnmic acid with thymol, showed a potent depigmenting effect and low cytotoxicity. Compound 4h, 5-methyl-2-(methylethyl)phenyl (2E)-3-(3,4,5-trimethoxyphenyl)prop-2-enoate, showed the most potent depigmenting effect (IC50=10 microM) with low cytotoxicity (IC50=200 microM).     

Acetylcholinesterase complexed with bivalent ligands related to huperzine a: experimental evidence for species-dependent protein-ligand complementarity

Acetylcholinesterase (AChE) inhibitors improve the cognitive abilities of Alzheimer patients. (-)-Huperzine A [(-)-HupA], an alkaloid isolated from the club moss, Huperzia serrata, is one such inhibitor, but the search for more potent and selective drugs continues. Recently, alkylene-linked dimers of 5-amino-5,6,7,8-tetrahydroquinolinone (hupyridone, 1a), a fragment of HupA, were shown to serve as more potent inhibitors of AChE than (-)-HupA and monomeric 1a. We soaked two such dimers, (S,S)-(-)-bis(10)-hupyridone [(S,S)-(-)-2a] and (S,S)-(-)-bis(12)-hupyridone [(S,S)-(-)-2b] containing, respectively, 10 and 12 methylenes in the spacer, into trigonal TcAChE crystals, and solved the X-ray structures of the resulting complexes using the difference Fourier technique, both to 2.15 A resolution. The structures revealed one HupA-like 1a unit bound to the "anionic" subsite of the active-site, near the bottom of the active-site gorge, adjacent to Trp84, as seen for the TcAChE/(-)-HupA complex, and the second 1a unit near Trp279 in the "peripheral" anionic site at the top of the gorge, both bivalent molecules thus spanning the active-site gorge. The results confirm that the increased affinity of the dimeric HupA analogues for AChE is conferred by binding to the two "anionic" sites of the enzyme. Inhibition data show that (-)-2a binds to TcAChE approximately 6-7- and > 170-fold more tightly than (-)-2b and (-)-HupA, respectively. In contrast, previous data for rat AChE show that (-)-2b binds approximately 3- and approximately 2-fold more tightly than (-)-2a and (-)-HupA, respectively. Structural comparison of TcAChE with rat AChE, as represented by the closely related mouse AChE structure (1maa.pdb), reveals a narrower gorge for rat AChE, a perpendicular alignment of the Tyr337 ring to the gorge axis, and its conformational rigidity, as a result of hydrogen bonding between its hydroxyl group and that of Tyr341, relative to TcAChE Phe330. These structural differences in the active-site gorge explain the switch in inhibitory potency of (-)-2a and 2b and the larger dimer/(-)-HupA potency ratios observed for TcAChE relative to rat AChE. The results offer new insights into factors affecting protein-ligand complementarity within the gorge and should assist the further development of improved AChE inhibitors.     

Palladium-catalyzed cascade reactions of benzyl halides with N-allyl-N-(2-butenyl)-p-toluenesulfonamide

Reaction of benzyl halides with N-allyl-N-(2-butenyl)-p-toluenesulfonamide 1 in the presence of a palladium catalyst afforded dihydropyrroles 3 in moderate to excellent yields. It is proposed that the cyclic products were formed via a palladium-catalyzed cascade cyclization-coupling process.     

Adsorption and desorption of toluene on nanoporous TiO2/SiO2 prepared by atomic layer deposition (ALD): influence of TiO2 thin film thickness and humidity

Adsorption and desorption of toluene on bare and TiO₂-coated silica with a mean pore size of 15 nm under dry and humid conditions were studied using toluene breakthrough curves and temperature programmed desorption (TPD) of toluene and CO₂. Two TiO₂/silica samples (either partially or fully covered with TiO₂) were prepared with 50 and 200 cycles of TiO₂ atomic layer deposition (ALD), respectively. The capacity of silica to adsorb toluene improved significantly with TiO₂-thin film coating under dry conditions. However, toluene desorption from the surface due to displacement by water was more pronounced for TiO₂-coated samples than bare samples under humid conditions. In TPD experiments, silica with a thinner TiO₂ film (50-ALD cycled) had the highest reactivity for toluene oxidation to CO₂ both in the absence and presence of water. Toluene adsorption and oxidation reactivity of silica can be controlled by modifying the silica surface with small amount of TiO₂ using ALD.     

A SERS-based immunoassay for porcine circovirus type 2 using multi-branched gold nanoparticles

We report on a facile immunoassay for porcine circovirus type 2 (PCV2) based on surface enhanced Raman scattering (SERS) using multi-branched gold nanoparticles (mb-AuNPs) as substrates. The mb-AuNPs in the immunosensor act as Raman reporters and were prepared via Tris base-induced reduction and subsequent reaction with p-mercaptobenzoic acid (pMBA). They possess good stability and high SERS activity. Subsequently, the modified mb-AuNPs were covalently conjugated to the monoclonal antibody (McAb) against the PCV2 cap protein to form SERS immuno nanoprobes. These were captured in a microtiterplate via a immunoreaction in the presence of target antigens. The effects of antibody concentration, reaction time and temperature on the sensitivity of the immunoassay were investigated. Under optimized assay conditions, the Raman signal intensity at 1,076 cm^?1 increases logarithmically with the concentrations of PCV2 in the concentration ranging from 8?×?10² to 8?×?10⁶ copies per mL. The limit of detection is 8?×?10² copies per mL. Compared to conventional detecting methods such as those based on PCR, the method presented here is rapid, facile and very sensitive.

以2,4’-联苯二羧酸及咪唑并[4,5-f][1,10]邻菲咯啉为配体的钴(Ⅱ)、锰(Ⅱ)配合物的水热合成及晶体结构

在水热条件下,以2,4′-联苯二羧酸(2,4′-H2bpdc)和咪唑并[4,5-f][1,10]邻菲咯啉(L)为配体构筑了两种配合物{[Co(2,4′-bpdc)(L)(H2O)]·H2O}n(1)和[Mn(2,4′-bpdc)(L)(H2O)]n(2),并利用元素分析、X-射线单晶衍射和热重分析对其结构进行了表征。配合物1具有一维链状结构,配合物2展示了一维双链结构,两个配合物都通过分子间氢键和π-π相互作用形成三维网状结构。     

Excellent electrochemical performance of nitrogen-enriched hierarchical porous carbon electrodes prepared using nano-CaCO3 as template

Recently, tremendous research efforts have been concentrated on developing high-performance electrode materials to meet the ever-increasing energy and power demands in supercapacitors. Herein, we presented a high-capacity supercapacitor material based on nitrogen-enriched hierarchical porous carbons (NHPCs) synthesized by the carbonization of melamine formaldehyde resins using eco-friendly and inexpensive nano-CaCO₃ as template. The effects of carbonization temperature and template content on the porous structure and electrochemical characteristics were compared and discussed in detail. The prepared NHPCs possessed large surface area up to 834 m² g^?1 and high nitrogen content up to 20.94 wt %. As electrode material for supercapacitors, NHPCs exhibited superior electrochemical performances with high specific capacitance (190 F g^?1 at 20 A g^?1), outstanding rate capability (80 %), and excellent cycling stability (over 2,000 cycles at 5 A g^?1) in 1 M sulfuric acid media. The excellent electrochemical performances are due to the synergic effects of unique hierarchical porous microstructure, abundant nitrogen and oxygen functionalities, as well as high degree of graphitization framework.     

Carprofen-imprinted monolith prepared by reversible addition–fragmentation chain transfer polymerization in room temperature ionic liquids

To obtain fast separation, ionic liquids were used as porogens first in combination with reversible addition–fragmentation chain transfer (RAFT) polymerization to prepare a new type of molecularly imprinted polymer (MIP) monolith. The imprinted monolithic column was synthesized using a mixture of carprofen (template), 4-vinylpyridine, ethylene glycol dimethacrylate, [BMIM]BF₄, and chain transfer agent (CTA). Some polymerization factors, such as template-monomer molar ratio, the degree of crosslinking, the composition of the porogen, and the content of CTA, on the column efficiency and imprinting effect of the resulting MIP monolith were systematically investigated. Affinity screening of structurally similar compounds with the template can be achieved in 200 s on the MIP monolith due to high column efficiency (up to 12,070 plates/m) and good column permeability. Recognition mechanism of the imprinted monolith was also investigated.     

轻稀土萃取分离工艺技术经济评价

在传统、三出口、组合联动轻稀土萃取分离工艺研究分析的基础上,设计开发了带模糊分离和置换萃取等技术的组合联动轻稀土萃取分离新工艺流程,并与传统工艺进行了技术经济比较。经比较证明,组合联动轻稀土分离新工艺先进合理,充槽投资更省,生产成本更低,生产废水排放更少。