Multiple Luminescence Responses towards Mechanical Stimulus and Photo-Induction: The Key Role of the Stuck Packing Mode and Tunable Intermolecular Interactions

Organic luminescence with different forms continues to be one of the most active research fields in science and technology. Herein, an ultra-simple organic molecule (TPA-B), which exhibits both mechanoluminescence (ML) and photo-induced room-temperature phosphorescence (RTP) in the crystalline state, provides an opportunity to reveal the internal mechanism of ML and the dynamic process of photo-induced RTP in the same molecule. Through the detailed investigation of photophysical properties together with crystal structures, the key role of molecular packing and intermolecular interactions was highlighted in the luminescence response by mechanical and light stimulus, affording efficient strategies to design potential smart functional materials with multiple luminescence properties.     

Bare polyprolylene hollow fiber as extractive phase for in‐tube solid‐phase microextraction to determine estrogens in water samples

Polypropylene hollow fibers as the adsorbent were directly filled into a polyetheretherketone tube for in‐tube solid‐phase microextraction. The surface properties of hollow fibers were characterized by a scanning electron microscope. Combined with high performance liquid chromatography, the extraction tube showed good extraction performance for five environmental estrogen hormones. To achieve high analytical sensitivity, four important factors containing sampling volume, sampling rate, content of organic solvent in sample, and desorption time were investigated. Under the optimum conditions, an online analysis method was established with wide linear range (0.03–20 µg/L), good correlation coefficients (≥0.9998), low limits of detection (0.01–0.05 µg/L), low limits of quantitation (0.03–0.16 µg/L), and high enrichment factors (1087–2738). Relative standard deviations (n = 3) for intraday (≤3.6%) and interday (≤5.1%) tests proved the stable extraction performance of the material. Durability and chemical stability of the extraction tube were also investigated, relative standard deviations of all analytes were less than 5.8% (n = 3), demonstrating the satisfactory stability. Finally, the method was successfully applied to detect estrogens in real samples.     

Separation and purification of lanosterol,dihydrolanosterol, and cholesterol from lanolin by high‐performance counter‐current chromatography dual‐mode elution method

Lanosterol is a potential drug for cataracts treatment, which can reverse the aggregation of intracrystalline proteins. The low concentration in lanolin calls for high‐performance separation methods. In this study, a counter‐current chromatography dual‐mode elution method was developed for the first time to separate and purify lanosterol from hexane extract of lanolin after saponification, in which the column was first eluted with the lower phase as mobile phase in head‐to‐tail mode, followed by the upper phase in the tail‐to‐head mode. High purity of lanosterol, dihydrolanosterol, and cholesterol can be obtained simultaneously. A solvent system composed of n‐heptane/acetonitrile/ethyl acetate (5:5:1, v/v/v) was selected and optimized via partition coefficient determination. Compounds such as 111 mg lanosterol, 84 mg dihydrolanosterol, and 183 mg cholesterol with high purity of 99.77, 95.71, and 91.43%, respectively, analyzed by high‐performance liquid chromatography were obtained within 80 min from 700 mg crude extract from 1.78 g lanolin. The method was also used to improve the purity of commercial lanosterol product from 66.97 to above 99%. Counter‐current chromatography could serve as a potential and powerful technique for commercial production of highly pure lanosterol.     

Carbonized cotton fibers via a facile method for highly sensitive solid‐phase microextraction of polycyclic aromatic hydrocarbons

Cotton fiber is an environmentally friendly and natural material with a certain extraction capacity, while its enrichment ability is poor. In order to improve the extraction efficiency of cotton fibers, it was carbonized to form a layer of amorphous carbon as the sorbent by a simple carbonization method. Carbonized cotton fibers were filled into a polyetheretherketone tube for in‐tube solid‐phase microextraction. The carbonization time was investigated to obtain high extraction efficiency. Coupled to high‐performance liquid chromatography, the extraction tube was evaluated with polycyclic aromatic hydrocarbons, estrogens and phthalates, and it exhibited best extraction efficiency for polycyclic aromatic hydrocarbons. Under the optimum conditions, an online analysis method for several polycyclic aromatic hydrocarbons was established with large linear ranges (0.016–0.20 μg/L), low limits of detection (0.005–0.020 μg/L), and high enrichment factors (948–2874). Analysis method was successfully applied to the detection of targets in the real samples and shown satisfactory durability and chemical stability. Moreover, the relative recoveries ranged from 82 to 119.2%, which demonstrated the applicability of carbonized cotton fibers in sample preparation. Compared with other reported methods, the proposed method provided shorter extraction time, higher enrichment factors, comparable limits of detection, and recoveries.     

A rapid,sensitive, and widely applicable method for quantitative analysis of underivatized amino acids in different biological matrices by UHPLC‐MS/MS

A rapid, sensitive, and widely applicable method for the simultaneous quantitative analysis of 20 underivatized amino acids in different biological matrices, including serum, plasma, and tissue homogenates, using ultra high performance liquid chromatography with tandem mass spectrometry was developed and validated. Only 4 µL of serum, plasma, or tissue homogenate was extracted with 996 µL of solution (1.7 mM ammonium formate in 85% acetonitrile containing 0.1% formic acid) containing 100 ng/mL phenylalanine‐d5 as an internal standard without any further derivatization step. In addition, the matrix effects were small because a large volume of extraction solution was used. The total run time including reequilibration was 13 min. The results of linearity, accuracy, repeatability, precision, limits of detection, limits of quantification, and sample stability were sufficient to allow the measurement of the amino acids in different biological matrices. We conclude that our method is rapid, sensitive, and widely applicable and represents an improvement over other currently available technologies.     

Nano‐MoO3 for highly selective enrichment of polycyclic aromatic hydrocarbons in in‐tube solid‐phase microextraction

Nano‐molybdenum trioxide was prepared from nano‐molybdenum disulfide by simple firing in muffle furnace. Nano‐molybdenum trioxide was used as the extraction coating on the stainless steel wire. Four wires were filled in a polyetheretherketone tube to get an extraction tube. The tube was connected to the six‐port valve of a high performance liquid chromatograph, and the online analysis system was constructed. Extraction selectivity of the tube for different types of compounds, including polycyclic aromatic hydrocarbons, plasticizers, estrogens, anilines and neonicotinoids, was studied. Good enrichment ability for polycyclic aromatic hydrocarbons, but the extraction efficiency of others was not satisfactory. Using eight polycyclic aromatic hydrocarbons as the targets, an analytical method was established after optimizing main factors such as sampling volume, sampling rate, methanol content, and desorption time. The established method exhibited wide linear range to 0.016–20.00 μg/L and low limits of detection to 0.005 μg/L, and the enrichment factors can be up to 2443. The method was applied to the detection of trace polycyclic aromatic hydrocarbons in tap water and river water, and a good recovery was obtained. The tube showed good durability and chemical stability, and it still remained good extraction effect after more than 140 run.     

Screening potential antagonists of epidermal growth factor receptor from Marsdenia tenacissima via cell membrane chromatography model assisted by HPLC–ESI–IT–TOF–MS

Marsdenia tenacissima, or Tongguanteng in Chinese, is a traditional Chinese herb and has a broad application in clinical practice for its pharmacological effects of treating asthma, pneumonia, tonsillitis, pharyngitis tumors, etc. However, few studies have reported the screening of the active components of this medicine for tumor therapy. In this work, a two‐dimensional analytical system was developed to screen antagonists of epidermal growth factor receptor (EGFR) from M. tenacissima. A fraction was retained on the EGFR cell membrane chromatography (CMC) column, separated and identified as tenacissoside G (TG), tenacissoside H (TH) and tenacissoside I (TI) by two‐dimensional HPLC–IT–TOF–MS. Molecular docking and 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2‐H‐tetrazolium bromide (MTT) assay were carried out to assess the activity of TS (including TG, TH and TI). Molecular docking results showed that the binding mode of TS on EGFR is similar to that of gefitinib. The MTT assay demonstrated that gefitinib and TS (especially TI) could inhibit the growth of EGFR highly expressed cell lines in a dose‐dependent manner in the range of 5–50 μmol/L. In conclusion, the two‐dimensional EGFR/CMC–HPLC–IT–TOF–MS system could be a useful approach in drug discovery from traditional Chinese medicines for searching for potential antitumor candidates.     

Crystal structure and pale‐yellow emitting properties of K3Gd1–xDyxB6O12 solid solutions

A new potassium dysprosium polyborate, K₃DyB₆O₁₂, has been prepared via the high‐temperature molten salt method and structurally characterized by single‐crystal X‐ray diffraction analysis. The structure can be described as a three‐dimensional framework composed of isolated bicyclic [B₅O₁₀]^5? groups and Dy³⁺ and K⁺ ions. The Fourier transform IR (FT–IR) and ultraviolet–visible (UV–Vis) spectra were investigated. A series of K₃Gd_1–xDy_xB₆O₁₂ phosphors was prepared and their photoluminescence properties were studied. The K₃Gd_1–xDy_xB₆O₁₂ phosphors exhibit a strong yellow emission band at 577 nm (the ⁴F_9/2→⁶H_13/2 transition of Dy³⁺) under UV excitation of 275 nm (the ⁸S_7/2→⁶I_J transition of Gd³⁺), suggesting the occurrence of the energy transfer Gd³⁺→Dy³⁺. The optimized doping concentration of the Dy³⁺ ion was 8 mol%. We may expect that K₃Gd_1–xDy_xB₆O₁₂ is a promising pale‐yellow emission phosphor for visual displays or solid‐state lighting.     

Colloidal Synthesis and Charge‐Carrier Dynamics of Cs2AgSb1−yBiyX6 (X: Br,Cl; 0 ≤y ≤1) Double Perovskite Nanocrystals

A series of lead‐free double perovskite nanocrystals (NCs) Cs₂AgSb_1?yBi_yX₆ (X: Br, Cl; 0≤y≤1) is synthesized. In particular, the Cs₂AgSbBr₆ NCs is a new double perovskite material that has not been reported for the bulk form. Mixed Ag–Sb/Bi NCs exhibit enhanced stability in colloidal solution compared to Ag–Bi or Ag–Sb NCs. Femtosecond transient absorption studies indicate the presence of two prominent fast trapping processes in the charge‐carrier relaxation. The two fast trapping processes are dominated by intrinsic self‐trapping (ca. 1–2 ps) arising from giant exciton–phonon coupling and surface‐defect trapping (ca. 50–100 ps). Slow hot‐carrier relaxation is observed at high pump fluence, and the possible mechanisms for the slow hot‐carrier relaxation are also discussed.