n-Type GaAs/AlGaAs heterostructure detector with a 3.2 THz threshold frequency

Terahertz detection using the free-carrier absorption requires a small internal work function of the order of a few millielectron volts. A threshold frequency of 3.2 THz (93 microm or approximately 13 meV work function) is demonstrated by using a 1 x 10(18) cm(-3) Si-doped GaAs emitter and an undoped Al(0.04)Ga(0.96)As barrier structure. The peak responsivity of 6.5 A/W, detectivity of 5.5 x 10(8) Jones, and quantum efficiency of 19% were obtained at 7.1 THz under a bias field of 0.7 kV/cm at 6 K, while the detector spectral response range spans from 3.2 to 30 THz.     

Spontaneously generated walking X-shaped light bullets

In quadratic nonlinear media with normal dispersion and nonvanishing group velocity mismatch between fundamental wave and second-harmonic pulses, the wave packets of two harmonics can be locked together in propagation in the form of walking X-shaped light bullets. The output wave packets are developed into X-shaped light bullets with significant group delay time due to mutual dragging and significant shifting in spatiotemporal spectrum due to delayed nonlinear phase shift. We also show that spontaneously generated phase-front tilting can balance the dragging force induced by group velocity mismatch and lead to zero-velocity walking X-shaped light bullets.     

谷氨酸钠溶液514nm激光拉曼光谱受环境光影响的研究

探讨了环境光的存在对谷氨酸钠溶液的514 nm绿色激光激发的拉曼光谱的影响.研究表明不同的环境光、自然光和室内荧光灯光均会对514 nm激光拉曼光谱产生干扰,存在着特征干扰峰.自然阳光干扰较小;而荧光灯光表现为1127、2107 cm-1和2170 cm-1等3个明显尖锐的脉冲峰,不能忽略.建议在进行谷氨酸钠溶液514 nm绿色激光拉曼光谱检测时,须在暗室或暗罩中进行,以完全隔离环境光的影响.     

Band gap of carbon nanotubes under combined uniaxial–torsional strain

Within tight-binding model, the band gaps of armchair and zigzag carbon nanotubes (CNTs) under both uniaxial tensile and torsional strains have been studied. It is found that the changes in band gaps of CNTs depend strongly on the strain type. The torsional strain can induce a band gap for armchair CNTs, but it has little effect on band gap of the zigzag CNTs. While the tensile strain has great effect on band gap of zigzag CNTs, but it has no effect on that of the armchair CNTs. More importantly, when both the tensile and torsional strains are simultaneously applied to the CNTs, the band gap changes of armchair CNTs are not equal to a simple sum over those induced separately by uniaxial tensile and torsional strains. There exists a cooperative effect between two kinds of strains on band gap changes of armchair CNTs. But for zigzag CNTs, the cooperative effect was not found. Analytical expressions for the band gaps of armchair and zigzag CNTs under combined uniaxial–torsional strains have been derived, which agree well with the numerical results.     

基于经典光学方法的物体表面微观结构的三维成像

设计了基于经典光学方法的物体表面微观结构的三维成像实验装置以及相应计算程序,从记录不同角度平行光照射下的物体表面照度出发,经图片处理后得到物体表面的三维立体结构.     

车辆天窗气动噪声的数值分析与实验研究

本文从汽车天窗气动噪声的机理入手,利用与实车几何尺寸为1:5的简化模型进行了空腔绕流的数值计算,分析了其流场结构及气动噪声产生的原因.在低速静音风洞中进行了不同流速下的流场和声场实验研究,研究了天窗不同位置的速度剪切层变化,以及不同流速下的声压级变化,发现了除了特征频率下的风振噪声,还存在较大频率范围的气动噪声,其随着...     

珙桐叶总黄酮提取工艺及体外抗氧化性

运用正交试验设计探讨了绵竹白云山珙桐叶黄酮的微波辅助提取工艺条件,并对提取液的抗氧化性能进行了研究。结果表明,珙桐叶总黄酮提取的最佳工艺参数：微波功率700W,料液比（g/mL）1∶40,乙醇质量分数浓度为70%,提取时间为2min,测得每克干叶中总黄酮含量为71.03mg。对提取液的抗氧化性研究表明,珙桐叶总黄酮对超氧阴离子自由基、羟基自由基的清除率较好,在实验所选浓度范围内,总还原能力随浓度增加而增强。     

基于分形编码的天体光谱降噪方法

为了降低噪声影响,恢复光谱的连续谱和谱线等主要特征,以便准确测量谱线的等值宽度,文章根据天体光谱自身具有局部自相似性,而随机白噪声不具有自相似性,首次将分形方法应用于天体光谱降噪.实验表明,分形降噪方法对于准确测量谱线的等值宽度、星系红移等参数是有效的,此外,还可以实现数据压缩.分形方法适用于海量光谱的降噪和数据存储.     

一种离轴凸双曲面单修加工及检测方法的研究

离轴凸双曲面的加工和检测是非球面加工检测中的一个比较困难的问题.结合一块口径φ230mm、离轴量226mm的凸双曲面镜,提出了离轴凸双曲面镜单修加工以及采用离轴Hindle球检测偏转角度的离轴凸双曲面镜这一方案.给出了单修加工工艺,并解决了检测光路的搭建难点.加工完成的离轴凸双曲面的面形精度RMS优于λ/50(λ=63...     

调制器低偏置方案优化光电振荡器相位噪声

提出了采用调制器低偏置方案来降低光电振荡器(OEO)的相位噪声方案并得到了实验验证.调制器的大光功率注入与低偏置点设置能够降低噪信比,进而降低输出信号的相位噪声.实验证明,当60 mW光功率注入时,在低偏置点能得到相噪的最低值,该值比正交偏置点对应的相噪值下降了2.8 dB.