Highly Enantioselective Ring‐Opening Reactions of Aziridines with Indole and Its Application in the Building of C3‐Halogenated Pyrroloindolines

A magnesium‐catalyzed asymmetric ring‐opening reaction of aziridine with indole has been realized by employing commercially available chiral ligands. Both of the enantiomers of the ring‐opening product could be obtained with good yields and a high level of enantioselectivity. The corresponding ring‐opening product could be further transformed to various types of enantioenriched C₃‐halogenated‐pyrroloindolines.     

Aromatic Nitrogen Mustard‐Based Prodrugs: Activity,Selectivity, and the Mechanism of DNA Cross‐Linking

Three novel H₂O₂‐activated aromatic nitrogen mustard prodrugs ( 6 – 8 ) are reported. These compounds contain a DNA alkylating agent connected to a H₂O₂‐responsive trigger by different electron‐withdrawing linkers so that they are inactive towards DNA but can be triggered by H₂O₂ to release active species. The activity and selectivity of these compounds towards DNA were investigated by measuring DNA interstrand cross‐link (ICL) formation in the presence or absence of H₂O₂. An electron‐withdrawing linker unit, such as a quaternary ammonia salt ( 6 ), a carboxyamide ( 7 ), and a carbonate group ( 8 ), is sufficient to deactivate the aromatic nitrogen mustard resulting in less than 1.5 % cross‐linking formation. However, H₂O₂ can restore the activity of the effectors by converting a withdrawing group to a donating group, therefore increasing the cross‐linking efficiency (>20 %). The stability and reaction sites of the ICL products were determined, which revealed that alkylation induced by 7 and 8 not only occurred at the purine sites but also at the pyrimidine site. For the first time, we isolated and characterized the monomer adducts formed between the canonical nucleosides and the aromatic nitrogen mustard ( 15 ) which supported that nitrogen mustards reacted with dG, dA, and dC. The activation mechanism was studied by NMR spectroscopic analysis. An in vitro cytotoxicity assay demonstrated that compound 7 with a carboxyamide linker dramatically inhibited the growth of various cancer cells with a GI₅₀ of less than 1 μM , whereas compound 6 with a charged linker did not show any obvious toxicity in all cell lines tested. These data indicated that a neutral carboxyamide linker is preferable for developing nitrogen mustard prodrugs. Our results showed that 7 is a potent anticancer prodrug that can serve as a model compound for further development. We believe these novel aromatic nitrogen mustards will inspire further and effective applications.     

Control of Chiral Nanostructures by Self‐Assembly of Designed Amphiphilic Peptides and Silica Biomineralization

Peptides, the fundamental building units of biological systems, are chiral in molecular scale as well as in spatial conformation. Shells are exquisite examples of well‐defined chiral structures produced by natural biomineralization. However, the fundamental mechanism of chirality expressed in biological organisms remains unclear. Here, we present a system that mimics natural biomineralization and produces enantiopure chiral inorganic materials with controllable helicity. By tuning the hydrophilicity of the amphiphilic peptides, the chiral morphologies and mesostructures can be changed. With decreasing hydrophilicity of the amphiphilic peptides, we observed that the nanostructures changed from twisted nanofibers with a hexagonal mesostructure to twisted nanoribbons with a lamellar mesostructure, and the extent of the helicity decreased. Defining the mechanism of chiral inorganic materials formed from peptides by noncovalent interactions can improve strategies toward the bottom‐up synthesis of nanomaterials as well as in the field of bioengineering.     

Magnetically Encoded Luminescent Composite Nanoparticles through Layer‐by‐Layer Self‐Assembly

Sensitive and rapid detection of multiple analytes and the collection of components from complex samples are important in fields ranging from bioassays/chemical assays, clinical diagnosis, to environmental monitoring. A convenient strategy for creating magnetically encoded luminescent CdTe@SiO₂@n Fe₃O₄ composite nanoparticles, by using a layer‐by‐layer self‐assembly approach based on electrostatic interactions, is described. Silica‐coated CdTe quantum dots (CdTe@SiO₂) serve as core templates for the deposition of alternating layers of Fe₃O₄ magnetic nanoparticles and poly(dimethyldiallyl ammonium chloride), to construct CdTe@SiO₂@n Fe₃O₄ (n=1, 2, 3, …?) composite nanoparticles with a defined number (n) of Fe₃O₄ layers. Composite nanoparticles were characterized by zeta‐potential analysis, fluorescence spectroscopy, vibrating sample magnetometry, and transmission electron microscopy, which showed that the CdTe@SiO₂@n Fe₃O₄ composite nanoparticles exhibited excellent luminescence properties coupled with well‐defined magnetic responses. To demonstrate the utility of these magnetically encoded nanoparticles for near‐simultaneous detection and separation of multiple components from complex samples, three different fluorescently labeled IgG proteins, as model targets, were identified and collected from a mixture by using the CdTe@SiO₂@n Fe₃O₄ nanoparticles.     

Rationally Investigating the Influence of T1 Location on Electroluminescence Performance of Aryl Amine Modified Phosphine Oxide Materials

The correspondence between triplet location effect and host‐localized triplet–triplet annihilation and triplet–polaron quenching effects was performed on the basis of a series of naphthyldiphenylamine (DPNA)‐modified phosphine oxide hosts. The number and ratio of DPNA and diphenylphosphine oxide was adjusted to afford symmetrical and unsymmetrical molecular structures and different electronic environments. As designed, the first triplet (T₁) states were successfully localized on the specific DPNA chromophores. Owing to the meso‐ and multi‐insulating linkages, identical optical properties and comparable electrical performance was observed, including the same first singlet (S₁) and T₁ energy levels to support the similar singlet and triplet energy transfer and the close frontier molecular orbital energy levels. This established the basis of rational investigation on T₁ location effect without interference from other optoelectronic factors.     

MnO2‐Modified Persistent Luminescence Nanoparticles for Detection and Imaging of Glutathione in Living Cells and In Vivo

Persistent luminescence nanoparticles (PLNPs) hold great promise for the detection and imaging of biomolecules. Herein, we have demonstrated a novel nanoprobe, based on the manganese dioxide (MnO₂)‐modified PLNPs, that can detect and image glutathione in living cells and in vivo. The persistent luminescence of the PLNPs can be efficiently quenched by the MnO₂ nanosheets. In the presence of glutathione (GSH), MnO₂ was reduced to Mn²⁺ and the luminescence of PLNPs can be restored. The persistent luminescence property can allow detection and imaging without external excitation and avoid the background noise originating from the in situ excitation. This strategy can offer a promising platform for detection and imaging of reactive species in living cells or in vivo.     

Ruthenium‐Catalyzed C7 Amidation of Indoline CH Bonds with Sulfonyl Azides

A ruthenium‐catalyzed direct C7 amidation of indoline C?H bonds with sulfonyl azides was developed. This procedure allows the synthesis of a variety of 7‐amino‐substituted indolines, which are useful in pharmaceutical. The good functional tolerances, as well as the mild conditions, are prominent feature of this method.     

Size‐Regulable Vesicles Based on Anion–π Interactions

Taking tetraoxacalix[2]arene[2]triazine as a functionalization platform, a series of new amphiphilic molecules were synthesized in 18 to 53 % yields by using a fragment coupling protocol. These amphiphilic molecules self‐assembled into stable vesicles in a mixture of THF and water, with the surface of the vesicles engineered by electron‐deficient cavities. Various anions are able to selectively influence the size of self‐assembled vesicles, following the order of F^?<ClO₄^?<SCN^?<BF₄^?<Br^?<Cl^?<NO₃^?, as revealed by DLS measurements. Such a sequence was independent with the hydration cost and in agreement with the binding strength of anions with tetraoxacalix[2]arene[2]triazine host molecule, indicating that the anion–π interaction most probably competed over other possible weak interactions and accounted for this interesting selectivity. In addition, the chloride permeation process across the membrane of the vesicles was also preliminarily studied by means of fluorescent experiments. This study, in addition to providing the potentiality of heteracalixaromatics as new models to construct functional vesicles, opens a new avenue to study the anion–π interactions in aqueous and also potentially in living systems.     

Copper‐Catalyzed One‐Pot Denitrogenative–Dehydrogenative–Decarboxylative Coupling of β‐Ketoacids with Trifluorodiazoethane: Facile Access to Trifluoromethylated Aldol Products

A novel copper‐catalyzed one‐pot cross‐coupling of β‐ketoacids with in situ generated trifluorodiazoethane has been developed. This reaction provides a direct and efficient method, in which one C?C bond and one C?O bond were formed in a carbenoid center with concomitant denitrogenation–dehydrogenation–decarboxylation, to afford trifluoromethylated aldol products. In several preliminary experiments, good to high enantioselectivities were also obtained.     

Tough nanocomposite hydrogels from cellulose nanocrystals/poly(acrylamide) clusters: influence of the charge density,aspect ratio and surface coating with PEG

Cellulose-derived materials are usually characterized by sophisticated structures, leading to unique and multiple functions, which have been a source of inspiration for the fabrication of a wide variety of nanocomposites. Cellulose nanocrystals/poly(acrylamide) (CNCs/PAM) nanocomposite hydrogels were synthesized via in situ polymerization in the CNC suspension. The cellulose from pulp fiber under different sulfuric acid hydrolysis conditions, examined by conductometric titration and transmission electron microscopy, was applied to study how the effects of the surface charge and aspect ratio affect CNCs’ mechanical reinforcement in nanocomposites. The results indicated that the higher surface charge concentration resulted in better dispersibility in aqueous suspension, leading to a more efficient energy dissipation process. The CNC reinforcement behavior followed the percolation model where the greater aspect ratio of CNC contributed to higher mechanical properties. The preferential adsorption of poly(ethylene glycol) (PEG) on the CNC surface was characterized by zeta potential measurements where the fracture strength and fracture elongation of nanocomposites decreased with increasing PEG concentration. The adsorption of PEG on the CNC surface occupied the active sites for polymer chain propagation, which hindered the PAM cross-linking effect on the CNC surface and decreased the cross-linking density of the network.