A novel homocystine-agarose adsorbent for separation and preconcentration of nickel in table salt and baking soda using factorial design optimization of the experimental conditions

Homocystine was for the first time, chemically linked to a highly cross-linked agarose support (Novarose) to be employed as a chelating adsorbent for preconcentration and AAS determination of nickel in table salt and baking soda. Nickel is quantitatively adsorbed on a small column packed with 0.25 ml of the adsorbent, in a pH range of 5.5–6.5 and simply eluted with 5 ml of a 1 mol l⁻¹ hydrochloric acid solution.

A factorial design was used for optimization of the effects of five different variables on the recovery of nickel. The results indicated that the factors of flow rate and column length, and the interactions between pH and sample volume are significant.

In the optimized conditions, the column could tolerate salt concentrations up to 0.5 mol l⁻¹ and sample volumes beyond 500 ml. Matrix ions of Mg²⁺ and Ca²⁺, with a concentration of 200 mg l⁻¹, and potentially interfering ions of Cd²⁺, Cu²⁺, Zn²⁺ and Mn²⁺, with a concentration of 10 mg l⁻¹, did not have significant effect on the analyte's signal. Preconcentration factors up to 100 and a detection limit of 0.49 μg l⁻¹, corresponding to an enrichment volume of 500 ml, were obtained for the determination of the analyte by flame AAS. Application of the method to the determination of natural and spiked nickel in table salt and baking soda solutions resulted in quantitative recoveries. Direct ETAAS determination of nickel in the same samples was not possible because of a high background observed.     

Reinforcement of a thin plate by a thin layer

We study the bending of a thin plate, stiffened with a thin elastic layer, of thickness δ. We describe the complete construction of an asymptotic expansion with respect to δ of the solution of the Kirchhoff–Love model and give optimal estimates for the remainder. We identify approximate boundary conditions, which take into account the effect of the stiffener at various orders. Thanks to the tools of multi‐scale analysis, we give optimal estimates for the error between the approximate problems and the original one. We deal with a layer of constant stiffness, as well as with a stiffness in δ^?1. Copyright © 2007 John Wiley & Sons, Ltd.     

First Report of a Lipopeptide Biosurfactant from Thermophilic Bacterium Aneurinibacillus thermoaerophilus MK01 Newly Isolated from Municipal Landfill Site

A biosurfactant-producing thermophile was isolated from the Kahrizak landfill of Tehran and identified as a bacterium belonging to the genus Aneurinibacillus. A thermostable lipopeptide-type biosurfactant was purified from the culture medium of this bacterium and showed stability in the temperature range of 20–90 °C and pH range of 5–10. The produced biosurfactant could reduce the surface tension of water from 72 to 43 mN/m with a CMC of 1.21 mg/mL. The strain growing at a temperature of 45 °C produces a substantial amount of 5 g/L of biosurfactant in the medium supplemented with sunflower oil as the sole carbon source. Response surface methodology was employed to optimize the biosurfactant production using sunflower oil, sodium nitrate, and yeast extract as variables. The optimization resulted in 6.75 g/L biosurfactant production, i.e., 35 % improved as compared to the unoptimized condition. Thin-layer chromatography, FTIR spectroscopy, ¹H-NMR spectroscopy, and biochemical composition analysis confirmed the lipopeptide structure of the biosurfactant.     

Haloperidol imprinted polymer: preparation,evaluation, and application for drug assay in brain tissue

Several molecularly imprinted polymers (MIPs) were prepared in the present work, and their binding properties were evaluated in comparison with a nonimprinted polymer (NIP). An optimized MIP was selected and applied for selective extraction and analysis of haloperidol in rabbit brain tissue. A molecularly imprinted solid-phase extraction (MISPE) method was developed for cleanup and preconcentration of haloperidol in brain samples before HPLC-UV analysis. Selectivity of the MISPE procedure was investigated using haloperidol and some structurally different drugs with similar polarity that could exist simultaneously in brain tissue. The extraction and analytical process was calibrated in the range of 0.05–10 ppm. The recovery of haloperidol in this MISPE process was calculated between 79.9 and 90.4 %. The limit of detection (LOD) and the limit of quantification (LOQ) of the assay were 0.008 and 0.05 ppm, respectively. Intraday precision and interday precision values for haloperidol analysis were less than 5.86 and 7.63 %, respectively. The MISPE method could effectively extract and concentrate haloperidol from brain tissue in the presence of clozapine and imipramine. Finally, the imprinted polymer was successfully applied for the determination of haloperidol in a real rabbit brain sample after administration of a toxic dose. Therefore, the proposed MISPE method could be applied in the extraction and preconcentration before HPLC-UV analysis of haloperidol in rabbit brain tissue.     

Removal of heavy metals from industrial wastewaters using amine-functionalized nanoporous carbon as a novel sorbent

Nano-porous carbon (NPC) was synthesized by hydrothermal condensation of fructose and characterized by X-ray powder diffraction and also nitrogen adsorption analysis. It was then modified with amino groups and used as a sorbent for the removal of heavy metal ions. The formation of amino-modified NPC was confirmed by X-ray powder diffraction, infrared spectroscopy, thermogravimetric and elemental analysis. NPC was applied for removal of Pb(II), Cd(II), Ni(II) and Cu(II) ions. The effects of sample pH and the adsorption kinetics were studied, and the adsorption capacity was determined. The sorbent was applied to the removal of heavy metal ions in industrial waste water samples.

Fabrication of Stiffness Gradients of GelMA Hydrogels Using a 3D Printed Micromixer

Many properties in both healthy and pathological tissues are highly influenced by the mechanical properties of the extracellular matrix. Stiffness gradient hydrogels are frequently used for exploring these complex relationships in mechanobiology. In this study, the fabrication of a simple, cost‐efficient, and versatile system is reported for creation of stiffness gradients from photoactive hydrogels like gelatin‐methacryloyl (GelMA). The setup includes syringe pumps for gradient generation and a 3D printed microfluidic device for homogenous mixing of GelMA precursors with different crosslinker concentration. The stiffness gradient is investigated by using rheology. A co‐culture consisting of human adipose tissue‐derived mesenchymal stem cells (hAD‐MSCs) and human umbilical cord vein endothelial cells (HUVECs) is encapsulated in the gradient construct. It is possible to locate the stiffness ranges at which the studied cells displayed specific spreading morphology and migration rates. With the help of the described system, variable mechanical gradient constructs can be created and optimal 3D cell culture conditions can be experientially identified.     

Encapsulation of a binuclear manganese(II) complex with an amino acid-based ligand in zeolite Y and its catalytic epoxidation of cyclohexene

A Schiff base ligand was synthesized by the condensation of salicylaldehyde with l-tyrosine. Interaction of this ligand with Mn(II)-exchanged zeolite Y leads to encapsulation of the ligand within the zeolite and complexation of the metal. The encapsulated complex has been characterized by spectroscopic studies and chemical analyses. This material serves as a catalyst for the oxidation of cyclohexene to cyclohexene epoxide and 2-cyclohexene-1-ol using H₂O₂ as oxidant. The reaction conditions have been optimized for solvent, temperature and amount of oxidant and catalyst. The catalyst shows high activity and selectivity toward production of cyclohexene epoxide in acetonitrile at 60 °C with [H₂O₂]/[C₆H₁₀] = 2.5 molar ratio. Comparison of the encapsulated catalyst with the corresponding homogeneous catalyst showed that the heterogeneous catalyst had higher activity and selectivity than the homogeneous catalyst.     

Hydrogen production via CO2-reforming of methane over Cu and Co doped Ni/Al2O3 nanocatalyst: impregnation versus sol–gel method and effect of process conditions and promoter

In this study, Cu and Co doped Ni/Al₂O₃ nanocatalyst was synthesized via impregnation and sol–gel methods. The physiochemical properties of nanocatalyst were characterized by XRD, field emission scanning electron microscopy (FESEM), particle size distribution, BET, fourier transform infrared spectroscopy (FTIR), TG–DTA and energy dispersive X-ray (EDX) analysis. The samples were employed for CO₂-reforming of methane in atmospheric pressure, temperature range from 550 to 850 °C, under various mixture of CH₄/CO₂ and different gas hourly space velocity. XRD patterns besides indicating the decline of the peaks intensity in sol–gel method, proved the potential of this procedure in diminishing the crystal size and preventing the NiAl₂O₄ spinel formation. Moreover, high surface area might derive of smaller particle size and uniform morphology of sol–gel prepared ones, confirmed by FESEM and BET analysis. TG–DTG analysis as well supported the higher surface area for sol–gel made ones, represented the proper calcination temperature (approximately 600 °C). Also, presence of the active phases and elemental composition of nanocatalysts determine via EDX analysis. Promoting the basicity and the adsorption rate of CO₂, is attributed to the higher amount of OH groups for sol–gel prepared samples, proved by FTIR. Ni–Co/Al₂O₃ due to the synergetic effect of sol–gel method and cobalt addition depicted excellent characterization such as higher surface area, smaller particle size, supplying more stable support and enhanced morphology. Therefore, this nanocatalyst represented the best products yield (H₂ = 98.21 and CO = 95.64), H₂/CO close to unit (0.92–1.05) and stable conversion during 1,440 min stability test. So, Ni–Co/Al₂O₃ among all of the prepared nanocatalysts demonstrated the best catalytic performance and presented it as a highly efficient catalyst for dry reforming of methane. Despite of the stable yield of Ni–Cu/Al₂O₃, it depicted the lower catalytic activity and H₂/CO ratio than the unprompted nanocatalysts.     

Polyolefin catalysis of propene, 1-butene and isobutene monitored using hyperpolarized NMR

Polymerization reactions of the dissolved gases propene, 1-butene, and isobutene catalyzed by [Zr(Cp)₂Me][B(C₆F₅)₄] were characterized using in situ NMR. Hyperpolarization of ¹³C spins by the dissolution dynamic nuclear polarization (DNP) technique provided a signal enhancement of up to 5000-fold for these monomers. For DNP hyperpolarization, liquid aliquots containing monomers were prepared at a temperature between the freezing point of the solvent toluene and the boiling point of the monomer, mixed with the polarizing agent α,γ-bis-diphenylene-β-phenylallyl free radical, and subsequently frozen. The hyperpolarized signals after dissolution enabled the observation of reaction kinetics, as well as polymer products and side products within a time of 30 s from the start of the reaction. The observed kinetic rate constants for polymerization followed a decreasing trend for propene, 1-butene, and isobutene, with the lowest rate constant for the latter explained by steric bulk. For all reactions, partial deactivation was further observed during the measurement time. The line shape and the chemical shift of the monomer signals with respect to a toluene signal were both dependent on catalyst concentration and reaction time, with the strongest dependence observed for isobutene. These changes are consistent with the characteristics of a rapid binding and unbinding process of the monomer to the catalyst occurring during the reaction.

Hyperpolarization by dissolution dynamic nuclear polarization (DNP) enhances ¹³C NMR signals of normally gaseous olefins. The polymerization reactions of these dissolved gases catalyzed by a metallocene catalyst are characterized in real time.