Correction to: 1H-imidazol-3-ium tricyanomethanide {[HIM]C(CN)3} as a nanostructured molten salt catalyst: application to the synthesis of pyrano[4,3‐b]pyrans

Research on Chemical Intermediates - Since it has been cleared that a fake compound has been sold to us as cyanoform.     

Comparing the deactivation behaviour of Co/CNT and Co/γ-Al2O3 nano catalysts in Fischer-Tropsch synthesis

An extensive study of Fischer-Tropsch (FT) synthesis on cobalt nano particles supported on γ-alumina and carbon nanotubes (CNTs) catalysts is reported.20 wt% of cobalt is loaded on the supports by impregnation method.The deactivation of the two catalysts was studied at 220 C,2 MPa and 2.7 L/h feed flow rate using a fixed bed micro-reactor.The calcined fresh and used catalysts were characterized extensively and different sources of catalyst deactivation were identified.Formation of cobalt-support mixed oxides in the form of xCoO yAl2O3 and cobalt aluminates formation were the main sources of the Co/γ-Al2O3 catalyst deactivation.However sintering and cluster growth of cobalt nano particles are the main sources of the Co/CNTs catalyst deactivation.In the case of the Co/γ-Al2O3 catalyst,after 720 h on stream of continuous FT synthesis the average cobalt nano particles diameter increased from 15.9 to 18.4 nm,whereas,under the same reaction conditions the average cobalt nano particles diameter of the Co/CNTs increased from 11.2 to 17.8 nm.Although,the initial FT activity of the Co/CNTs was 26% higher than that of the Co/γ-Al2O3,the FT activity over the Co/CNTs after 720 h on stream decreased by 49% and that over the Co/γ-Al2O3 by 32%.For the Co/γ-Al2O3 catalyst 6.7% of total activity loss and for the Co/CNTs catalyst 11.6% of total activity loss cannot be recovered after regeneration of the catalyst at the same conditions of the first regeneration step.It is concluded that using CNTs as cobalt catalyst support is beneficial in carbon utilization as compared to γ-Al2O3 support,but the Co/CNTs catalyst is more susceptible for deactivation.     

Plasma oxidation and stabilization of electrospun polyacrylonitrile nanofiber for carbon nanofiber formation

The effect of plasma treatment on the stabilization of copolymer P(AN-MA) containing 6.1 mol% methyl acrylate (MA) prepared by an electrospinning technique has been investigated at various oxygen contents (10 %, 20 % and 30 %) and different exposure times. The morphology and chemical structural evolution of electrospun and oxidized nanofibers were studied using field–emission scanning electron microscopy (FE-SEM), Fourier transform infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC). FT-IR analysis indicated that the treated nanofibers were effectively oxidized under different contents of oxygen and prolonged plasma exposure times by increasing the peak intensities of polar groups at 1730 and 3400 cm^?1 corresponding to C=O stretching band and OH stretching vibration mode, respectively. Additionally, a reduction in the extent of the cyclization reaction is observed with further increase in exposure times and contents of oxygen, which implies lower conversion of C≡N bands into C=N ones in the copolymer chain. According to the FE-SEM studies, the surfaces of the treated nanofibers were completely etched after 15 min of treatment due to the existence of strong ion bombardment and a reduction in the average fiber diameters was observed.     

Harnessing Plasticity in an Amine-Borane as a Piezoelectric and Pyroelectric Flexible Film

We demonstrate that trimethylamine borane can exhibit desirable piezoelectric and pyroelectric properties. The material was shown to be able operate as a flexible film for both thermal sensing, thermal energy conversion and mechanical sensing with high open circuit voltages (>10 V). A piezoelectric coefficient of d₃₃≈10–16 pC N⁻¹, and pyroelectric coefficient of p≈25.8 μC m⁻² K⁻¹ were achieved after poling, with high pyroelectric figure of merits for sensing and harvesting, along with a relative permittivity of 6.3.     

The first separation and stereochemical determination of bis(α-hydroxyalkyl) phosphinic acids diastereoisomers

A separation of bis(α-hydroxyalkyl) phosphinic acid diastereoisomers is described. A novel method for the determination stereochemistry of bis(α-hydroxyalkyl) phosphinic acid diastereoisomers has been developed. The stereochemistry of one diastereoisomer was confirmed after converting to the corresponding methyl ester using trimethyl orthoformate.     

Determination of carbamazepine in formulation samples using dispersive liquid–liquid microextraction method followed by ion mobility spectrometry

A simple, sensitive, fast and efficient method based on dispersive liquid–liquid microextraction (DLLME) followed by ion mobility spectrometry (IMS) has been proposed for preconcentration and trace detection of carbamazepine (CBZ) in formulation samples. In this method, 1 mL of methanol (disperser solvent) containing 80 μL of chloroform (extraction solvent) was rapidly injected by a syringe into a sample. After 5 min centrifugation, the preconcentrated carbamazepine in the organic phase was determined by IMS. Development of DLLME procedure includes optimization of parameters influencing the extraction efficiencies such as kind and volume of extraction solvent, disperser solvent and salt addition, centrifugation time and pH of the sample solution. The proposed method presented good linearity in the range of 0.05–10 μg mL^?1 and the detection limit was 0.025 μg mL^?1. The repeatability of the method expressed as relative standard deviation was 6 % (n = 5). This method has been applied to the analysis of carbamazepine formulation samples with satisfactory relative recoveries ≤75 %.     

The reaction of N-isocyaniminotriphenylphosphorane (NICITPP) with some of cyclic ketones and a primary amine in the presence of 3-phenyl-2-propynoic acid

The 1:1 imine intermediate generated by the addition of a primary amine to a cyclic ketone is trapped by N-isocyaniminotriphenylphosphorane in the presence of 3-phenyl-2-propynoic acid and the corresponding iminophosphorane intermediate was formed. Disubstituted 1,3,4-oxadiazole derivatives are formed via intramolecular aza-Wittig reaction of the iminophosphorane intermediate. The reactions were completed in neutral conditions at room temperature (18–26°C). The disubstituted 1,3,4-oxadiazole derivatives were produced in excellent yields.     

A thermodynamic study of interaction of Ag+, Mg2+, Ca2+, and K+ cations with 4-hydroxyphenyl-2,5-bis(2-benzofuranyl)pyridine in some binary mixed non-aqueous solvents

In the present work the complexation process between Ag⁺ and Mg²⁺ cations and 4-hydroxyphenyl-2,5-bis(2-benzofuranyl)pyridine (HBFPY) ligand was studied in pure dimethylformamide (DMF), ethanol (EtOH), acetonitrile (AN) and in (DMF-EtOH), (AN-EtOH) and (DMF-AN) binary mixed solvent solutions at different temperatures using the conductometric method. Also in this work the complexation reaction between Ca²⁺, K⁺ cations and HBFPY ligand, was studied in pure dimethylformamide (DMF), propanol (PrOH), 1,4-dioxane (DOX), ethanol (EtOH) and in DMF-PrOH, DMF-DOX and DMF-EtOH binary mixed solvent solutions at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complexes formed between this ligand and the studied cations is 1 : 1 [ML]. In most cases, addition of HBFPY to solutions of these cations, causes a continuous increase in the molar conductivities which indicates that the mobility of complexed cations is more than the uncomplexed ones. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program, GENPLOT. The stability constant of [Mg(HBFPY)]²⁺ complex in various neat solvents at 15°C decreases in order: EtOH > DMF > AN and the stability constant of [Ag(HBFPY)]⁺ complex in various neat solvents at 35°C decreases in order: DMF > EtOH. The values of standard enthalpy changes (ΔH° _c ) for complexation reactions were obtained from the slope of the Van’t Hoff plots and the changes in standard entropy (ΔS° _c ) were calculated from the relationship ΔH° _c,295.15= ΔH° _c –298.15ΔS° _c .     

Efficient and selective oxidation of alcohols in water employing palladium supported nanomagnetic Fe3O4@hyperbranched polyethylenimine (Fe3O4@HPEI.Pd) as a new organic–inorganic hybrid nanocatalyst

Palladium immobilized magnetic nanoFe₃O₄@hyperbranched polyethylenimine (Fe₃O₄@HPEI.Pd) was prepared according to a simple and cost effective pathway and it was employed as a new efficient and selective organic–inorganic hybrid nanocatalyst for the aqueous oxidation of primary and secondary alcohols to their corresponding products in good yields applying oxone (potassium hydrogen monopersulfate) and H₂O₂ as an oxidant at room temperature. Moreover, the catalytic system was reused at least 13 times without significant loss of activity. The complete characterization of this efficient nanocatalyst was investigated by FTIR, UV–Vis, TEM, SEM, XRD, TGA, VSM, ICP and EDX techniques.