On a bosonic-parafermionic realization ofU_q (\widehat{sl(2)})

We realize the current algebra at an arbitrary level in terms of one deformed free bosonic field and a pair of deformed parafermionic fields. It is shown that the operator product expansions of these parafermionic fields involve an infinite number of simple poles and simple zeros, which then condensate to form a branch cut in the classical limitq1. Our realization coincides with those of Frenkel-Jing and Bernard when the levelk takes the values 1 and 2, respectively.     

Low-Field NMR Relaxation Analysis of High-Pressure Ethane Adsorption in Mesoporous Silicas

Understanding the behaviour of short-chain hydrocarbons confined to porous solids informs the targeted extraction of natural resources from geological features, and underpins rational developments in separation, storage and catalytic conversion processes. Herein, we report the application of low-field (12.7 MHz) ¹H nuclear magnetic resonance (NMR) relaxation measurements to characterise ethane dynamics within mesoporous silica materials exhibiting mean pore diameters between 6 and 50 nm. Our measurements provide NMR-based adsorption isotherms within the range 25–50 bar and at ambient temperature, incorporating the ethane condensation point (40.7 bar at our experimental temperature of 23.6 °C). The quantitative nature of the acquired data is validated via a direct comparison of NMR-derived excess adsorption capacities with ex situ gravimetric ethane adsorption measurements, which are demonstrated to agree to within 0.2 mmol g⁻¹ of the observed ethane capacity. NMR relaxation time distributions are further demonstrated as a means to decouple interparticle and mesopore dominated adsorption phenomena, with unexpectedly rapid relaxation rates associated with interparticle ethane gas confirmed via a direct comparison with NMR self-diffusion analysis.     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

An investigation of the aggregation and water-air interfacial behaviour of a cationic tentacle molecule

The aggregation and air-water interface properties of a three-legged tentacle molecule tris (11-pyridinium undec-1-yl)benzene-1, 3, 5-tricarboxylate tribromide have been investigated by measurement of the molar conductance, , and equilibrium surface tensin,, over a wide range of bulk concentration (8×10^–6 – 0.3 M). In contrast to the single chain analogue, dodecyl pyridinium bromide, DDPB, the tentacle species shows no evidence for a conventional micellar transition in solutions up to 100 fold more concentrated than the critical micelle concentration of DDPB, though aggregation of small numbers of molecules cannot be excluded. The conductance behaviour suggests the occurrence of ion-pair (or higher) equilibria, which are likely to complicate the interpretation of the data. Also, in contrast to a previous tentacle molecule described in the literature, the present species is significantly surface active, and in the high concentration limit reduces to <30 mNm^–1, significantly lower than the values obtained for simple ionic amphiphiles. In this region the tentacle species seems to stand like a tripod at the water-air interface with both its hydrocarbon legs and its aromatic body lifted clear of the water surface. At much lower concentrations two small plateau regions in are apparent ( 60 and 52 mNm^–1). Here, the tentacle molecule occupies a much larger surface area, and seems to adopt a crab-like crouch with its aromatic body and polar ester substituents lowered into the water surface.     

Thermal stability and degradation mechanisms of poly(acrylic acid) and its salts: Part 3—Magnesium and calcium salts

The magnesium and calcium salts of acrylic acid have been polymerised in aqueous solution using ammonium persulphate as initiator. Both polymers were also prepared by the neutralisation of poly(acrylic acid) with metal oxide in the same medium.

The thermal degradation behaviour of magnesium and calcium polyacrylate was studied using thermogravimetry (TG), differential thermal analysis (DTA) and thermal volatilisation analysis (TVA). Degradation products were investigated by IR spectroscopy, mass spectrometry and GC-MS techniques, the volatile product fraction having first been separated by subambient TVA.

The decompositions of these materials show some similarities to the behaviour of the alkali metal salts of poly(acrylic acid) and to that of the alkaline earth metal salts of poly(methacrylic acid), but there are also important differences. Acetone and carbon dioxide are the most important volatile products and, in addition, there are various other carbonyl containing products. More carbon dioxide, resulting from side group scission, is evolved from magnesium polyacrylate than from calcium polyacrylate, because of the lower thermal stability of magnesium carbonate.     

Mutual Separation and Determination of Th(IV) and U(VI) Using Arsenazo III as a Dye Collector Reagent by Flotation‐Spectrophotometric Method

This paper reports a simple and highly selective method for the separation, preconcentration, and determination of trace amounts of thorium and uranium in some complex samples via staircase flotation. The method is based on the initial flotation of the Th(IV)‐arsenazo III complex in the presence of U(VI) from a solution of 5 mol dm^?3 HCl, then reduction of U(VI) to U(IV) and repetition of the flotation step. In both steps, the floated complex was dissolved in a 5‐mL portion of methanol and its absorbance was measured at 655 nm, spectrophotometrically. For a 30‐mL portion of the sample, Beer's law was obeyed over the concentration ranges of 3.40 × 10^?7to 3.06 × 10^?6 mol dm^?3 for Th(IV) and3.40 × 10^?7 to 3.40 × 10^?6 mol dm^?3 for U(IV) with the apparent molar absorptivity of 4.20 × 10⁵ dm³ mol^?1 cm^?1 and 3.59 × 10⁵ dm³ mol^?1 cm^?1, respectively. The RSDs (n = 7) corresponding to 1.7 × 10^?6 mol dm^?3 of Th(IV) and U(IV) were obtained as 1.7% and 1.87%. The detection limits (7 blanks) for both the metal ions were found to be 1.7 × 10^?7 mol dm^?3. The important benefit of the method is that the determinations are free from the interference of almost all cations and anions found in the complex matrixes, such as seawater samples. The proposed method was also applied to reference materials, and the determinations were shown to have good agreement with the certified values.     

HPTLC Procedure for Determination of Levonorgestrel in the Drug-Release Media of an In-situ-Forming Delivery System

JPC – Journal of Planar Chromatography – Modern TLC -     

Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(ε-caprolactone) and poly(ethylene glycol)

Biodegradable polyurethane elastomers with potential for applications in medical implants with tunable degradation rate and physical properties were synthesized from reaction of epoxy terminated polyurethanes (EUP) with 1,6-hexamethylene diamine (HMDA) as curing agent. Poly(ε-caprolactone) (PCL) and poly(ethylene glycol) (PEG) as well as 1,6-hexamethylene diisocyanate (HDI) were used for preparation of isocyanate terminated polyurethanes which were subsequently blocked with glycidol to prepare EUPs. All materials were characterized by conventional methods, and their properties were studied fully. Results showed that elastomers based on PEG exhibit superior degradation rate and inferior mechanical properties in comparison to elastomers based on PCL. Optimum degradation rate and mechanical properties were obtained from elastomers made from mixture of PCL and PEG base EUPs.     

Activities of Individual Ions From Infinite Dilution to Saturated Solutions

A new procedure, which provides a closer approximation for the junction potentials than the Henderson equation, is tested to reduce new emf data for the chloride ion in CsCl solutions and previously measured data for individual ions in aqueous solutions of KCl, NaCl, and NaBr. The liquid junction potential is calculated from numerical integration of its basic equation without assuming constant mobility or using concentrations instead of activities. The mean ionic activity coefficients of the salts, obtained from the activity coefficients of the individual ions, show good agreement with values reported in the literature. The activity coefficients of the individual chloride ion at 25°C in aqueous solutions of CsCl up to 3 molal and in KCl solutions were measured using a chloride ion-selective electrode. It has been confirmed that the activity of the chloride ion is equal to the activity of the cation in CsCl solutions and, contrary to the prediction of hydration theory, it is higher than the activity of the cation in aqueous KCl solutions. The New Hydration Theory has been developed to overcome the shortcomings of the older hydration theory and has been used to smooth the experimental activity coefficients of the individual ions in aqueous solutions and to extrapolate them up to the saturated solution.     

Manufacturing of pH sensitive PVA/PVP/MWCNT and PVA/PEG/MWCNT nanocomposites: an approach for significant drug release

The purpose of this paper is studying the effect of incorporation of Multiwall Carbon Nanotubes (MWCNT) into two different nanocomposites in poly vinyl alcohol (PVA)/polyvinylpyrrolidone (PVP), and PVA/Polyethylene glycol (PEG). MWCNT were synthesized by chemical vapor deposition (CVD) method using acetylene and Fe/Co/Al₂O₃ as carbon precursor and catalyst, respectively. Nitric acid and sulfuric acid were used for purification and functionalization of MWCNT. Afterward, highly pure and functionalized MWCNT (0, 0.02, and 0.05% w/w) were incorporated in PVA/PVP and PVA/PEG to synthesize PVA/PVP/MWCNT and PVA/PEG/MWCNT nanocomposites hydrogel membranes that cross-linked by freezing–thawing. PEG and PVP were selected in these nanocomposites as dispersion matrix for MWCNT as well as for increasing the elasticity of the nanocomposites membranes. The morphology of the hydrogels was characterized by SEM, FTIR, XRD, TGA, and the mechanical properties of the hydrogel membranes were investigated. The swelling behavior in different pH-buffer solutions was studied as well as studying weight loss percentage and swelling kinetic. The drug releasing process of the hydrogel membranes was investigated using salicylic acid as a model drug. It was found that MWCNT are dispersed well into the polymers and crystallinity, mechanical properties and thermal stability of the hydrogels contain MWCNT are better than that without MWCNT. Maximum degree of swelling was observed at pH 7 and swelling degree increases with increasing the ratio of MWCNT in the hydrogels from 0.02 to 0.05%. All hydrogel membranes followed non-Fickian mechanism and drug releasing were controlled by varying the pH and amount of MWCNT.