Organically modified montmorillonite and chitosan–phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications

Nanocomposite membranes based on polyelectrolyte complex (PEC) of chitosan/phosphotungstic acid (PWA) and different types of montmorillonite (MMT) were prepared as alternative membranes to Nafion for direct methanol fuel cell (DMFC) applications. Fourier transform infrared spectroscopy (FTIR) revealed an electrostatically fixed PWA within the PEC membranes, which avoids a decrease in proton conductivity at practical condition. Various amounts of pristine as well as organically modified MMT (OMMT) (MMT: Cloisite Na, OMMT: Cloisite 15A, and Cloisite 30B) were introduced to the PEC membranes to decrease in methanol permeability and, thus, enhance efficiency and power density of the cells. X-ray diffraction patterns of the nanocomposite membranes proved that MMT (or OMMT) layers were exfoliated in the membranes at loading weights of lower than 3 wt.%. Moreover, the proton conductivity and the methanol permeability as well as the water uptake behavior of the manufactured nanocomposite membranes were studied. According to the selectivity parameter, ratio of proton conductivity to methanol permeability, the PEC/2 wt.% MMT 30B was identified as the optimum composition. The DMFC performance tests were carried out at 70 °C and 5 M methanol feed and the optimum membrane showed higher maximum power density as well as acceptable durability compared to Nafion 117. The obtained results indicated that owing to the relatively high selectivity and power density, the optimum nanocomposite membrane could be considered as a promising polyelectrolyte membrane (PEM) for DMFC applications.     

Unfolding mechanism of PHD2 as a vital protein: all-atom simulation approach

Prolyl hydroxylase domain 2 containing protein (PHD2) is a central protein in regulation of cellular response to hypoxia. This protein controls the responses of cell to oxygen level via the regulation of hypoxia inducible factor (HIF) stability. HIF induces the expression of many genes, especially ones orchestrate angiogenesis. There are some reports that mentioned in some tumor types the level of HIF is high in spite of the presence of wild-type PHD2 and normoxic environment. Therefore, the possibility of PHD2 misfolding in some cancer cells arises. Studying such important protein unfolding pathway is insightful for possible therapeutic approaches. In this study, the unfolding pathway of PHD2 illustrates utilizing molecular dynamics simulation of protein thermal denaturation. Based on current study results, we represent the possible mechanisms of PHD2 unfolding in detail. The possible intermediates of PHD2 thermal unfolding are characterized, and the most venomous state of its unfolding pathway is introduced.     

Computational study of substituent effect in para substituted platinabenzene complexes

The electronic structure and properties of the platinabenzene and para substituted platinabenzenes have been investigated using the hybrid density functional mpw1pw91 theory. The substituent effect in structure parameters, frontier orbital energies, aromaticity indexes, and hyperpolarizability has been studied. The calculations show that, in all molecules HOMO → LUMO transition makes the major contribution in the most intense electronic transition.     

Synthesis of Novel Chiral Ionic Liquid and Its Application in Reduction of Prochiral Ketones to the Corresponding Chiral Alcohols Using NaBH4

A novel chiral ionic liquid (CIL) based on nicotinium salt has been synthesized and used as an efficient asymmetric chiral catalyst for reduction of acetophenone derivatives with NaBH₄ in methanol at room temperature. The optically active alcohols were obtained in low to moderate enantiomeric excess in a short reaction time.     

Application of a cohesive zone element for the prediction of damage in nano/micro coating

Many tools in production technology are nowadays coated to obtain a satisfactory lifetime and degradation resistance. Therefore, the main goal of this study is to investigate antiadhesive and wear resistant coatings made of ceramics, plastics and metals produced by High Power Pulsed Magnetron Sputtering (HPPMS) technique [1]. A cohesive zone element technique (CZ) is applied to model the interactions of the coatings and the substrate surfaces (see [2]). This goes along with the investigations of the delamination and failure behavior of the involved surfaces. To illustrate the applicability of the model, several structural simulations are performed. The developed CZ element model is capable of modeling the separation, the contact and also the irreversible reloading conditions in both normal and tangential directions [3]. The model is further developed to be applicable for different structures including different bonding behaviors, with a higher stability. The talk concludes with a detailed discussion of the numerical results of different material and interface properties. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Factors affecting the morphology of benzoyl peroxide microsponges

Benzoyl peroxide (BPO) is primarily used in the treatment of mild to moderate acne. However, its application is associated with skin irritation. It has been shown that encapsulation and controlled release of BPO could reduce the side effect while also reducing percutaneous absorption when administered to the skin. The aim of the present investigation was to design and formulate an appropriate encapsulated form of BPO, using microsponge technology, and explore the parameters affecting the morphology and other characteristics of the resultant products employing scanning electron microscopy (SEM). Benzoyl peroxide particles were prepared using an emulsion solvent diffusion method by adding an organic internal phase containing benzoyl peroxide, ethyl cellulose and dichloromethane into a stirred aqueous phase containing polyvinyl alcohol (PVA). Different concentrations of BPO microsponges were incorporated in lotion formulations and the drug release from these formulations were studied. The SEM micrographs of the BPO microsponges enabled measurement of their size and showed that they were spherical and porous. Results showed that the morphology and particle size of microsponges were affected by drug:polymer ratio, stirring rate and the amount of emulsifier used. The results obtained also showed that an increase in the ratio of drug:polymer resulted in a reduction in the release rate of BPO from the microsponges. The release data showed that the highest and the lowest release rates were obtained from lotions containing plain BPO particles and BPO microsponges with the drug:polymer ratio of 13:1, respectively. The kinetics of release study showed that the release data followed Peppas model and the main mechanism of drug release from BPO microsponges was diffusion.     

Kinetic,isotherm, and mechanism investigations of the removal of nitrate and nitrite from water by the synthesized hydrotalcite Mg–Al

Research on Chemical Intermediates - The objective of this work is to test the effectiveness of hydrotalcite as an adsorbent for the retention of nitrate and nitrite ions and to study the influence...     

A highly sensitive spectrophotometric determination of ultra trace amounts of azide ion in water and biological samples after preconcentration using dispersive liquid-liquid microextraction technique

A simple and highly sensitive method developed for preconcentration and spectrophotometric determination of ultra trace amounts of azide ion (N ₃ ^? ) in water and biological samples using dispersive liquid-liquid microextraction (DLLME) technique. The method is based on ion association formation of azide ion with malachite green and extraction of the ion pairing product using DLLME technique. Some important parameters, such as reaction conditions and the kind and volume of extraction solvent and disperser solvent were studied and optimized. The calibration curve was linear in the range of 0.5–50 μg/L of azide ion. Also, the enrichment factor and extraction recovery obtained were 24.7 and 98.7%, respectively. The method was applied to the determination of azide ion in water and biological samples.     

Ultrasonic accelerated efficient synthesis of aminobenzochromenes using Ag2Cr2O7 nanoparticles as a reusable heterogeneous catalyst

Ag₂Cr₂O₇ nanoparticles were found to be an exceedingly effective catalyst for the mild and green synthesis of aminobenzochromenes. The reaction was performed under ultrasonic irradiation as an innocuous tool and in water as a green solvent at room temperature. This method encompasses several sustainable and economic benefits.     

A new liquid-phase microextraction method based on solidification of floating organic drop

In the present study, a new and versatile liquid-phase microextraction method is described. This method requires very simple and cheap apparatus and also a small amount of organic solvent. Eight microliters of 1-undecanol was delivered to the surface of solution containing analytes and solution was stirred for a desired time. Then sample vial was cooled by inserting it into an ice bath for 5 min. The solidified 1-undecanol was transferred into a suitable vial and immediately melted; then, 2 μL of it was injected into a gas chromatograph for analysis.Some polycyclic aromatic hydrocarbons (PAHs) were used as model compounds for developing and evaluating of the method performance. Analysis was carried out by gas chromatography/flame ionization detection (GC/FID).Several factors influencing the microextraction efficiency, such as the nature and volume of organic solvent, the temperature and volume of sample solution, stirring rate and extraction time were investigated and optimized. The applicability of the technique was evaluated by determination of trace amounts of PAHs in environmental samples. Under the optimized conditions, the detection limits (LOD) of the method were in the range of 0.07-1.67 μg L⁻¹ and relative standard deviations (R.S.D.) for 10 μg L⁻¹ PAHs were <7%. A good linearity (r² > 0.995) in a calibration range of 0.25-300.00 μg L⁻¹ was obtained. After 30 min extraction duration, enrichment factors were in the range of 594-1940. Finally, the proposed method was applied to the determination of trace amounts of PAHs in several real water samples, and satisfactory results were resulted. Since very simple devices were used, this new technique is affordable, efficient, and convenient for extraction and determination of low concentrations of PAHs in water samples.