Kinetic,isotherm, and mechanism investigations of the removal of nitrate and nitrite from water by the synthesized hydrotalcite Mg–Al

Research on Chemical Intermediates - The objective of this work is to test the effectiveness of hydrotalcite as an adsorbent for the retention of nitrate and nitrite ions and to study the influence...     

A Novel Naphthalene-Immobilized Nanoporous SBA-15 as a Highly Selective Optical Sensor for Detection of Fe<Superscript>3+</Superscript> in Water

A novel organic-inorganic hybrid optical sensor (SBA-NCO) was designed and synthesized through immobilization of isocyanatopropyl-triethoxysilane and 1-amino-naphthalene onto the surface of SBA-15 by post-grafting method. The characterization of materials using XRD, TEM, N₂ adsorption-desorption, and FT-IR techniques confirmed the successful attachment of organic moieties and preserving original structure of SBA-15 after modification step. Fluorescence experiments demonstrated that SBA-NCO was a highly selective optical sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ in a wide pH values.     

Gel-assisted synthesis of anatase TiO2 nanoparticles and application for electrochemical determination of L-tryptophan

Anatase titanium dioxide nanoparticles (TiO₂-NPs) were synthesized with and without gelatin via the sol-gel method. The TiO₂-NPs were characterized by a number of techniques, such as thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR) and ultraviolet visible spectroscopy (UV-Vis). The particle sizes of the TiO₂-NPs prepared with and without gelatin were ～13 and ～17 nm, respectively. The main advantage of using gelatin as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. The results indicated that gelatin was a reliable green stabilizer, which can be used as a polymerization agent in the sol-gel method for synthesis of tiny size TiO₂-NPs. Moreover, the composite film was prepared by synthesized TiO₂-NPs nanoparticles and multi wall carbon nanotube (MWNT) on glassy carbon electrode (TiO₂-MWNT/GCE). The TiO₂-MWNT/GCE responded linearly to L-tryptophan (L-Trp) in the concentration of 1.0 × 10^?6 to 1.5 × 10^?4 M with detection limit of 5.2 × 10^?7 M at 3 using amperometry. The studied sensor exhibited good reproducibility and long-term stability.     

Electrochemical Determination of Dextromethorphan on Reduced Graphene Oxide Modified Screen‐Printed Electrode after Electromembrane Extraction

In this paper, electromembrane extraction coupled with differential pulse voltammetry (DPV) on a reduced graphene oxide modified screen‐printed carbon electrode (RGO‐SPCE) for the determination of dextromethorphan (DXM) in urine and plasma has been described. DXM migrated from 4 mL of a donor phase across a thin layer of 2‐nitrophenyl octyl ether (NPOE) immobilized in the pores of a porous hollow fiber, into a 20 µL acceptor phase (HCl) present inside the lumen of the fiber. Then, 15 µL of a 0.1 M NaOH solution was added to the acceptor phase and the mixture was analyzed using DPV.     

Plasma-Assisted Reaction Chemical Ionization for Elemental Mass Spectrometry of Organohalogens

We present plasma-assisted reaction chemical ionization (PARCI) for elemental analysis of halogens in organic compounds. Organohalogens are broken down to simple halogen-containing molecules (e.g., HBr) in a helium microwave-induced plasma followed by negative mode chemical ionization (CI) in the afterglow region. The reagent ions for CI originate from penning ionization of gases (e.g., N₂) introduced into the afterglow region. The performance of PARCI-mass spectrometry (MS) is evaluated using flow injection analyses of organobromines, demonstrating 5–8 times better sensitivities compared with inductively coupled plasma MS. We show that compound-dependent sensitivities in PARCI-MS mainly arise from sample introduction biases.

含吡啶的大环席夫碱锰(Ⅱ)配合物:合成、表征及抗菌性质(英文)

在Mn髤模板作用下,2,6-diacetylpyridine(DAP)及合适链状胺化合物通过[1+1]环缩合反应,合成了3个大环席夫碱配合物,并进行了红外、元素分析、质谱及电导率等表征及研究。测得了配合物[MnL1(CH3CN)](ClO4)2的晶体结构,中心离子呈现出稍微扭曲的五角锥配位构型。研究了配合物对S.aureus(ATCC 6633),B.cereus(ATCC 7064),C.xerosis(ATCC 373)(gram-positive bacterial strains),E.coli(PTCC 10009),K.pneuomoniae(MTCC 109),and P.vulgaris(lio)(gram-negative bacterial strains)的抗菌活性。结果显示[MnL3](ClO4)2抗菌活性明显优于[MnL1(CH3CN)](ClO4)2and[MnL2](ClO4)2。在25℃条件下0.1 mol·L-1 KCl溶液中,通过电位计量法测定了化合物的质子化常数。     

Simultaneous extraction and preconcentration of copper,silver and palladium with modified alumina and their determination by electrothermal atomic absorption spectrometry

In the present work,an easy solid phase extraction method using alumina modified with polyethylenimine as a new adsorbent was applied to the simultaneous extraction of copper,silver,and palladium ions prior to their determination with electrothermal atomic absorption spectrometry.The analytical procedure involved the complex formation of these cations with polyethylenimine as a chelating agent in buffer media of pH 7.0.Under the optimum conditions,a preconcentration factor of200,150,and 200,precision of ±5.4%,±4.7%,and ±5.2%and linear calibration ranges of 15.0-140,4.0-93,and 7.5-125 ng/L(in original solution) for Cu,Ag,and Pd were obtained,respectively.Also detection limits of3.9,1.1,and 2.0 ng/L were obtained for Cu,Ag,and Pd,respectively.The proposed method was applied to the determination of copper,silver,and palladium in some real samples with satisfactory results.     

Mild,four-component synthesis of 6-amino-4-aryl-3-methyl-1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles catalyzed by titanium dioxide nano-sized particles

A convenient and efficient solvent-free procedure is described for preparation of 6-amino-4-aryl-3-methyl-1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles by four-component reaction of hydrazine hydrate, ethyl acetoacetate, aryl aldehyde, and malononitrile in the presence of a catalytic amount of titanium dioxide nano-sized particles. Short reaction times, high yields under ambient conditions, simple reaction, clean work-up, and reusability of the nano heterogeneous catalyst are the advantages of this method.     

Synthesis of CaWO4:Er3+@SiO2 and CaWO4:Tm3+@SiO2 nano-particles via a combustion pathway and study of their optical properties

Use of citric acid as a chelating agent and fuel, ammonium nitrate as fuel, boric acid as flux material and silica as supports, CaWO₄:Ln³⁺@SiO₂ (Ln = Er and Tm) nanoparticles were synthesized via a combustion reaction at 800 °C. Characterization of the samples was performed by X-ray diffractometer (XRD), reflectance UV–Vis spectrophotometer, fluorescence spectrophotometer (PL) and transmission electron microscope (TEM). XRD patterns showed that tetragonal crystalline structure of scheelite and silica supports were formed, and that the formation of a silica support could enhance the luminescence intensity of CaWO₄:Ln³⁺. The reflectance UV–Vis and PL spectra indicated the broad absorption band of WO₄ ^2? groups about 240 nm, the WO₄ ^2? wide excitation band with maximum at 240 nm, a broad emission band of WO₄ ^2? with maximum about 420 nm, and characteristic emissions of Ln³⁺ ions. According to the TEM analysis, CaWO₄:Er³⁺@SiO₂ and CaWO₄:Tm³⁺@SiO₂ nanoparticles have almost the same morphology with average particle sizes about 50 nm.     

Uncatalyzed synthesis of 3-amino-1,5-dihydro-2H-pyrrol-2-ones

Uncatalyzed one-pot pseudo-four-component reaction of ethyl pyruvate, anilines, and aldehydes in n-hexane as solvent, under reflux, affords a variety of 3-amino-1,5-dihydro-2H-pyrrol-2-ones in high yield. n-Hexane is an excellent driving force in preparation of the desired products. These compounds have biological and pharmacological properties and are also used in medicinal chemistry. Use of a non-toxic and inexpensive solvent, simple and efficient synthesis, clean work-up, and high yields of the products are the advantages of this method. We report the first catalyst-free method for synthesis this class of compounds.