Application of Sol–Gel Based Poly(ethylene glycol)/Multiwalled Carbon Nanotubes Coated Fiber for SPME of Methyl tert-Butyl Ether in Environmental Water Samples

In this research, the sol–gel technology was applied for the preparation of solid-phase microextraction fibers for extracting of methyl tert-butyl ether (MTBE) from environmental water samples. For this purpose, two different polymers such as poly(ethylene glycol) (PEG) and combination of PEG and multiwall carbon nanotubes (MWCNTs) were prepared using sol–gel technology as coating procedure for the fibers. The pre-concentration process followed by GC–FID determination was used and the results evidenced that pre-concentration factor for PEG/CNTs fiber was approximately five times higher than PEG. Parameters affecting the extraction efficiency such as temperature, extraction time, stirring speed and salt effect for each fiber were investigated and optimized. On the optimal conditions, the linear range for MTBE with PEG and PEG/CNT fibers were 10–3,000 and 1–1,000 ng mL^?1 and the detection limits (S/N = 3) were 1.0 and 0.3 ng mL^?1, respectively. The sol–gel PEG/CNTs fiber has good performance and therefore relatively better figures of merit and experimental results such as thermal stability (up to 320 °C), average of life time (over 150 times) and repeatability (RSD < 4) in comparison to conventional PDMS/Carboxen fiber, which was already reported for determination of MTBE.     

New Insights into Sulfur Deposition on Gold Using Dithiobisphthalimide as a New Precursor

Dithiobisphthalimide is used as a new precursor for the spontaneous deposition of sulfur on gold surfaces in acetonitrile. Characterization of the modified surfaces is achieved using X‐ray photoelectron spectroscopy (XPS), electrochemistry and scanning tunneling microscopy (STM). The reported results indicate that the sulfur deposition is an efficient and fast process and that high coverages can be reached very quickly. Sequential high‐resolution STM in air allows the direct observation, for the first time, of the mobility of the usually observed rectangular structures as individual units. It also shows the reversible association/dissociation of these rectangles. The nature of these structures is highly debated in the literature and the present work provides new insights into their nature through the use of a new sulfur precursor under non‐traditional conditions. To explain our results we consider these structures as simple sulfur adlayers on the gold surface.     

Stemmosides C and D, two novel unusual pregnane glycosides from Solenostemma argel: structural elucidation and configurational study by a combined NMR-quantum mechanical strategy

Stemmosides C and D, two novel pregnane glycosides characterized by an unusual C-17 side chain were isolated from the pericarps of Solenostemma argel. In addition, stemmoside D displays an uncommon 14β proton configuration, apparently being the first pregnane isolated from plants known to have a 15 keto, cis CD ring junction. Their structures have been established by ESIMS and NMR experiments. The relative configuration of the molecules was determined using a strategy based on the simulation of ¹H, ¹³C, and J coupling NMR parameters. DFT calculations of ¹H and ¹³C chemical shifts, and of the ¹H homonuclear spin–spin coupling constants were performed with the mPW1PW91 functional using the 6-31G(d,p) basis set on the fully optimized geometries of all the possible stereoisomers.     

A Deadly Organometallic Luminescent Probe: Anticancer Activity of a ReI Bisquinoline Complex

The photophysical properties of [Re(CO)₃(L ‐N₃)]Br (L ‐N₃=2‐azido‐N,N‐bis[(quinolin‐2‐yl)methyl]ethanamine), which could not be localized in cancer cells by fluorescence microscopy, have been revisited in order to evaluate its use as a luminescent probe in a biological environment. The Re^I complex displays concentration‐dependent residual fluorescence besides the expected phosphorescence, and the nature of the emitting excited states have been evaluated by DFT and time‐dependent (TD) DFT methods. The results show that fluorescence occurs from a ¹LC/MLCT state, whereas phosphorescence mainly stems from a ³LC state, in contrast to previous assignments. We found that our luminescent probe, [Re(CO)₃(L ‐N₃)]Br, exhibits an interesting cytotoxic activity in the low micromolar range in various cancer cell lines. Several biochemical assays were performed to unveil the cytotoxic mechanism of the organometallic Re^I bisquinoline complex. [Re(CO)₃(L ‐N₃)]Br was found to be stable in human plasma indicating that [Re(CO)₃(L ‐N₃)]Br itself and not a decomposition product is responsible for the observed cytotoxicity. Addition of [Re(CO)₃(L ‐N₃)]Br to MCF‐7 breast cancer cells grown on a biosensor chip micro‐bioreactor immediately led to reduced cellular respiration and increased glycolysis, indicating a large shift in cellular metabolism and inhibition of mitochondrial activity. Further analysis of respiration of isolated mitochondria clearly showed that mitochondrial respiratory activity was a direct target of [Re(CO)₃(L ‐N₃)]Br and involved two modes of action, namely increased respiration at lower concentrations, potentially through increased proton transport through the inner mitochondrial membrane, and efficient blocking of respiration at higher concentrations. Thus, we believe that the direct targeting of mitochondria in cells by [Re(CO)₃(L ‐N₃)]Br is responsible for the anticancer activity.     

Investigation on solidification conditions in functionally Si-gradient Al alloys using simulation and cooling curve analysis methods

During recent years, functionally graded alloys have been widely produced by melt processing routes to achieve advanced material properties. In this paper, the new cast-decant-cast (CDC) method has been used to produce the gradient in concentration of Si particles in cross section of final Al–Si castings. For this purpose, the hypereutectic LM28 and hypoeutectic LM25 alloys were selected for each step casting into the steel mold. Cooling curve thermal analysis and simulation methods were applied to investigate the cooling behavior of first poured LM28 alloy and improve the accuracy of CDC process by determining the curves of solid fraction and temperature profiles. The final products were studied through optical microscopy, image analysis, and Brinell hardness measurement. The results showed that the silicon concentration decreased along transition zone between two alloys by increasing the decanting time in the order of 25, 40, and 50 s. This can be due to the lower temperature of exterior LM28 alloy in semi-solid state and shorter solidification time of interior LM25 alloy. This can lead a to reduction of the diffusion rate of elemental silicon along the transition zone. The microscopic scale of transition zone between two alloys developed the maximum thickness of 438 μm and hardness value of 83 HB comparing with the hardness of 88 and 62 HB for external and internal alloys, respectively. The microscopic observations and hardness evaluations confirmed the creation of functionally Si-gradient products.     

Cellulose@Fe2O3 nanoparticle composites: magnetically recyclable nanocatalyst for the synthesis of 3-aminoimidazo[1,2-a]pyridines

Research on Chemical Intermediates - 3-Aminoimidazo[1,2-a]pyridines have been synthesized through a condensation reaction of 2-aminopyridine, an aldehyde and an alkyl or aryl isocyanide in high...