Nonlinear Mechanical Response of Polymer Matrix Composites: A Review

Abstract

The present article provides a review on the nonlinear mechanical behavior of polymer matrix composites (PMCs). Initially, essential mechanisms driving the nonlinear response of PMCs under different loading conditions are discussed. Rate-dependence, tension-compression asymmetry, viscous behavior, unloading characteristics, interaction between stress components and effects of environmental factors on mechanical properties are briefly reviewed. This is followed by a review of major approaches and constitutive models for predicting stress–strain behavior of PMCs. Following an increasing degree of complexity, models are categorized into four major classes: nonlinear elasticity models, elastic-plastic models, elastic-plastic-viscous models and Damage-Plasticity models. The vast number of existing models is mainly due to the anisotropy and inhomogeneity of PMCs. In brief, this review focuses on informing the reader of major frameworks, rather than addressing all the models in detail.     

Mathematical Modelling of Glyphosate Molecularly Imprinted Polymer-Based Microsensor with Multiple Phenomena

The massive and careless use of glyphosate (GLY) in agricultural production raises many questions regarding environmental pollution and health risks, it is then important to develop simple methods to detect it. Electrochemical impedance spectroscopy (EIS) is an effective analytical tool for characterizing properties at the electrode/electrolyte interface. It is useful as an analytical procedure, but it can also help in the interpretation of the involved fundamental electrochemical and electronic processes. In this study, the impedance data obtained experimentally for a microsensor based on molecularly imprinted chitosan graft on 4-aminophenylacetic acid for the detection of glyphosate was analyzed using an exact mathematical model based on physical theories. The procedure for modeling experimental responses is well explained. The analysis of the observed impedance response leads to estimations of the microscopic parameters linked to the faradic and capacitive current. The interaction of glyphosate molecules with the imprinted sites of the CS-MIPs film is observed in the high frequency range. The relative variation of the charge transfer resistance is proportional to the log of the concentration of glyphosate. The capacitance decreases as the concentration of glyphosate increases, which is explained by the discharging of the charged imprinted sites when the glyphosate molecule interacts with the imprinted sites through electrostatic interactions. The phenomenon of adsorption of the ions in the CMA film is observed in the low frequency range, this phenomenon being balanced by the electrostatic interaction of glyphosate with the imprinted sites in the CS-MIPs film.     

Performance enhancement of the power penalty in DWDM FSO communication using DPPM and OOK modulation

This paper presents the design and performance enhancement of the power penalty (PP) in a dense wavelength division multiplexing based on free space optical communication (FSOC) link using digital pulse position modulation (DPPM) and on–off keying (OOK) modulation. Such a system has a high performance, low cost, robust and power efficient, reliable, excessive flexibility, and higher data rate for access networks. The system performance is evaluated for an 8-channel wavelength-division-multiplexing for hybrid fiber FSOC system at 2.5 Gbps on widely accepted modulation schemes under various atmospheric turbulence (AT) regimes conditions. The performance of system is introduced in terms of PP, bit-error rate (BER), transmission distance and the average received optical power. The numerical results shows that the improvement of the PP using DPPM modulation of 0.2–3.0 dB for weak turbulence (WT) regimes for BER of 10^?6 and above 20, 25 dB for strong turbulence (ST) regimes are reported for BER of 10^?6 and 10^?9, as respectively (depending on the AT level). Further, we develop of improvement the PP caused by multiple-access interference about 6.686 dB which is predicted for target BER of 10^?9 in WT and 1 dB at target BER of 10^?6 in ST when the 8 user are active on the system of optical network units. Additionally, the optical power budget and margin losses of a system are calculated with different link length. The proposed approach of DPPM merges superiority with higher enhancement of PP about 0.8 dB for BER equal 10^?9 at FSO link length l_fso?=?2000 m compared to OOK at 1 dB for WT. An improvement of 2 dB is observed using the DPPM scheme over an OOK due to capability of detect pulses under background noise conditions with increased receiver sensitivity.     

Supercontinuum generation with femtosecond optical pulse compression in silicon photonic crystal fibers at 2500 nm

In this paper, femtosecond optical pulses compression and supercontinuum generation in a triangular silicon photonic crystal fiber at 2500 nm are investigated. A region of large minimum anomalous group velocity dispersion, negligible higher order dispersions and unique nonlinearity of silicon are used to demonstrate compression of 100 fs initial input optical pulses to 2.5 fs and ultra-broadband supercontinuum generation with very low input pulse energy over short distances of the fiber.     

Preparation of bismuth sulfide nanoparticles as targeted biocompatible nano-radiosensitizer and carrier of methotrexate

In this study, Bi₂S₃@BSA–Bio–MTX nanoparticles (NPs) were synthesized for the first time by bovine serum albumin (BSA)-mediated biomineralization (Bi₂S₃@BSA NPs) followed by covalent bonding of biotin (Bio) and methotrexate (MTX) on the surface of the Bi₂S₃@BSA NPs via carbodiimide chemistry. The synthesized NPs were globular and exhibited uniform morphology with a hydrodynamic diameter of 107.6 ± 6.81 nm (mean ± standard deviation) and zeta potential of −20.9 ± 2.18 mV. Drug release from Bi₂S₃@BSA–Bio–MTX NPs indicated an enzyme-dependent release pattern. The in vitro biocompatibility of NPs was confirmed by investigating their cytotoxicity against the HEK-293 cell line and hemolysis assay test, whereas the in vivo biocompatibility of the NPs was evaluated and confirmed by the lethal dose 50 (LD₅₀) test. To evaluate the in vitro anticancer activity of the functionalized NPs and MTX, their cytotoxic effects was assessed against 4T1 cancer cells by 5-dimethylthiazol-z-yl)-2,5-diphenyltetrazolium bromide (MTT) assay with and without X-ray radiation. Results showed that Bi₂S₃@BSA–Bio–MTX NPs have excellent anticancer activity, especially following X-ray radiation.     

Synthesis and characterization of PEGylated iron and graphene oxide magnetic composite for curcumin delivery

Nowadays, nanostructures have been given significant attention in medical and biological fields. Among these nanostructures, graphene oxide (GO) has been widely used in drug delivery systems, because of its unique properties, and the ability to connect to other nanostructures such as magnetic nanoparticles (NPs) as well as polymers by its functional groups. In this research, first, GO was prepared by exfoliating graphite according to the modified Hummer’s method, and then the Fe₃O₄ NPs were synthesized by a simple co-precipitation method on GO nanosheets. In the next step, with the help of the ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling reagents, the polyethylene glycol (PEG) polymer was bonded to the GO-Fe₃O₄ nanocomposite. Finally, anti-cancer drug, curcumin (Cur) was loaded onto the nanocomposite and the Cur loading ratio was measured at about 8%. The samples were evaluated using Fourier transform-infrared, differential scanning calorimtery, vibrating-sample magnetometry, atomic force microscopy and dynamic light scattering techniques. The results show that the prepared nanocomposite is an appropriate candidate for biomedical applications.     

Modeling and active control of chatter vibrations of piezoelectric stacked machining arm in micro-turning process

Self-excited vibrations known as chatter are considered as the most detrimental issue in micro-turning processes. Occurring unpredictably, they adversely affect the tool life, productivity rate and surface quality of the machining processes. In this paper, a novel machining arm is modeled as a piezoelectric stacked rod which is subjected to a chatter force in the orthogonal micro-turning process. Due to the fact that machining processes are affected by various sources of uncertainties, H_∞ robust control approach is used to suppress the chatter vibrations of the machining arm in the presence of tool wear and dynamic model parameter variations. Also, input control force of the system is provided by exciting the input voltage of piezoelectric layers of the rod. In order to be certain that the designed controller succeeds in suppressing vibrations of the effective structural modes, behavior of the first three modes of vibrations are considered in the final response of the machining arm. In the following, performance of the robust H_∞ controller is compared with a modified PID controller. Simulation results show that the H_∞ controller improves the robustness and performance of the system against uncertainties. The PID controller extends the stability region of the sharp tool and fails to achieve this purpose for the worn tool although its performance is acceptable in suppressing chatter vibrations.

     

Facile one-pot,three-component synthesis of novel bis(heterocycles) incorporating thieno[2,3-b]thiophenes via Michael addition reaction

A synthesis of novel series of bis(2-amino-3-cyano-4H-chromene), bis(2-amino-3-cyanopyrano[3,2-c]chromene), bis(6-amino-5-cyano-1,4-dihydropyrano[2,3-c]pyrazole), and bis(2,7-diamino-3,4,6-tricyanopyrazolo[1,5-a]pyridine) derivatives linked to thieno[2,3-b]thiophene core via ether or ester linkages was reported. The formation of the target compounds presumably proceeds through a three component reaction of the appropriate bis(aldehyde) with 2 M of each of malononitrile and the corresponding active methylene compounds namely; dimedone, 4-hydroxycoumarine, 5-methyl-2,4-dihydro-3H-pyrazol-3-one, or cyanomethylpyrazole in dioxane at reflux in the presence of piperdine as a basic catalyst. The chemical structures of the new compounds were elucidated by several spectral tools.     

Experimental and theoretical approaches to the study of the reactivity and mechanism of the substitution of phenyl 1-(2,4-dinitronaphthyl) ether with anilines derivatives

Reactions of aniline derivatives in dimethyl sulfoxide with phenyl 1-(2,4-dinitronaphthyl) ether yield aryl 1-(2,4-dinitronaphthyl) amine, which results in substitution of the phenoxy groups at the naphthyl ipso carbon atom. Rate constants were measured spectrophotometrically, and reaction proton transfer was rate limiting. The values of the rate coefficients indicate a rate-limiting proton transfer mechanism with significant substituent effects. The calculated activation parameters were of regular variation with substituents in 4- and 3-position in the aniline nucleophile, and the reaction proceeded through a common mechanism. Hammett's reaction constant showed that the reaction rate constants depend on the electron density of the nitrogen atom of aniline derivative, whereas the coefficient value obtained from the Brönsted relation indicated that the reaction was significantly associative and quite zwitterion like. Computational studies of the substitution were carried out based on density functional theory, and theoretical to the experimental agreement was achieved.     

Validated ecofriendly chromatographic method for quantitative determination of anti‐migraine quaternary mixture

A novel ecofriendly, cost and time saving high‐performance thin‐layer chromatographic method was developed and validated for simultaneous determination of metoclopramide, ergotamine, caffeine, and paracetamol in bulk and pharmaceutical formulation. The separation was carried out on silica gel plates, using ethyl acetate:ethanol:ammonia (9:1:0.1, v/v/v) as a developing system. Ultraviolet detection was carried out at 272 nm. The resulting retention times were 0.15, 0.36, 0.49, and 0.74 min for metoclopramide, ergotamine, caffeine, and paracetamol, respectively. The greenness profile assessment was achieved to the proposed method to evaluate its greenness characters to the environment with acceptable results. Validation parameters were checked according to International Conference of Harmonization guidelines to achieve the international requirements for quality control analysis of the proposed drugs.