Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

Solid phase extraction of nitrate and nitrite anions using naturally and available sorbent

Radioactive waste contains nitrate and nitrite as well as radioactive fission products. Nitrate and nitrite anions are two of the major components of nuclear waste streams and contribute to environmental release hazards. The removal of nitrate and nitrite is a necessary step for the further treatment low-level radioactive wastes. The focus of the research is to evaluate the adsorption potential of solid phase derived from rice straw for nitrate and nitrite anions in single- and binary-component systems due to the fact that the rice straw is a very abundant and by-product material. The removal was accomplished under the optimize conditions of temperature, concentration, pH, contact time and quantity of adsorbent as these parameters are some of the main factors influencing the uptake of two solutes at the solid–solution interface. Batch-mode kinetic and equilibrium studies have been carried out. The experimental data was analyzed using equilibrium isotherm and kinetic models. The thermodynamic parameters (?G°, ?H°, and ?S°) were also determined using the equilibrium constant value obtained at different temperatures. Results show that this adsorbent is effective and much better or even superior than many sorbents for removal of nitrate and nitrite. The prepared sorbent as solid-phase extractant was successfully applied for the extraction of nitrate from actual water samples.     

Electrochemical characterization and stress corrosion cracking behavior of α-brass in molybdate-containing electrolytes

One of the major challenges in material design is the achievement of reasonable operational efficiency through understanding the factors affecting the material’s performance particularly strength and service lifetime characteristics. In this work, the electrochemical behavior of 72Cu–28Zn α-brass alloy in Na₂MoO₄-containing electrolytes was investigated using potentiodynamic polarization and electrochemical frequency modulation techniques complemented with scanning electron microscopy. Also, stress corrosion cracking behavior of the alloy under both open-circuit potential and anodic applied potentials, using the slow strain rate technique, was evaluated. The results drawn from the different techniques are comparable.     

Analytical solution of three-dimensional Navier–Stokes equations for the flow near an infinite rotating disk

In this letter, we will consider variational iteration method (VIM) and Padé approximant, for finding analytical solutions of three-dimensional viscous flow near an infinite rotating disk. The solutions is compared with the numerical (fourth-order Runge–Kutta) solution. The results illustrate that VIM–Padé is an appropriate method in solving the systems of nonlinear equations. It is predicted that VIM–Padé can have wide application in engineering problems (especially for boundary-layer and natural convection problems).     

Synthesis and Antibacterial Activity of Some New S-Triazole Derivatives

Abstract

Alkylation of 4-anilino-5-phenyl-4H-1,2,4-triazole-3-thiol (1) with some halo compounds yielded the corresponding sulfides 2a–f. Some sulfides 2e,f were cyclized to give triazolothiadiazines 3 and 4. Triazolothiadiazoles 5 and 6 were prepared through the reaction of compound 1 with carbon disulfide or ethyl orthoformate, respectively. Treatment of compound 1 with ethyl chloroformate or phenyl isothiocyanate yielded triazolo-thiadiazole and triazole 9 and 10, respectively. Reaction of compound 1 with Lawesson's reagent gave triazolothiadiazaphosphole derivative 11. Also, compound 1 underwent cyclocondensation reactions with some bidentate reagents to give triazolothiazines 4, 12, and 13. Triazolo-thiazepines and triaziepine 14–16 were synthesized via the reaction of compound 1 with β-ketoesters or ethyl cyanoacetate. Tricyclic systems 19 and 20 were prepared through the reaction of compound 4 with the appropriate reagent. Some synthesized compounds were tested for antibacterial activity.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Reactions of Hydrazonoyl Halides 33 1 : Synthesis of Some New 2,3-Dihydro-1,3,4-thiadiazoles Containing Pyrazol-3-yl,Indolin-2-one-2-yl and Indan-1,3-dione-2-yl Moieties

Some new 2,3-dihydro-1,3,4-thiadiazoles containing pyrazol-3-yl, indolin-2-one-2-yl and indan-1,3-dione-2-yl moieties in a good yields obtained from the reaction of hydrazonoyl halides with thiocarbamate and carbodithioate in ethanolic triethylamine respectively. In contrast, pyrazolylthiourea reacts with hydrazonoyl halides under the same condition afford corresponding hydrazonoyl sulfide derivatives.     

Addition Reaction Between Trimethyl Phosphite and Dibenzoylacetylene in the Presence of SH- or NH-Acids

The reactive 1:1 intermediate produced in the addition reaction between trimethyl-phosphite and dibenzoylacetylene was trapped by SH- or NH-acids such as 4-nitroimidazole, 4-methyl-5-nitroimidazole, succinimide, or mercaptoacetic acid to produce 2-substituted 1,4-diphenylbutane-1,4-diones.     

Biochemical study for the effect of henna (Lawsonia inermis) on Escherichia coli

Leaf samples of Lawsonia inermis (Li) were examined for their antimicrobial potential. Broth extracts in different concentrations were prepared and bioassayed in vitro for the growth of Escherichia coli. The growth of E. coli pathogen was inhibited to various degrees by increasing the concentration of the herbal powder. In addition to the observed alterations which were detected electrophoretically in the protein pattern, were activities of the amylase enzyme and glycoprotein fractions. The protein pattern has one common band of Rf 0.47 and two characteristic bands of Rf 0.36 and Rf 0.42 for E. coli sample. The quantitative mutation was observed in the bacteria with different concentrations of L. inermis compared with the control. Some types of proteins in E. coli completely disappeared upon being S.I affected. The amylase pattern showed one common band with Rf 0.037 and two characteristic bands with Rf 0.18 and Rf 0.37 for E. coli sample. The obvious quantitative mutation observed in bacteria with different concentrations of L. inermis compared with E. coli. The glycoprotein pattern recorded one common band at R₁ with Rf 0.94 for E. coli sample and bacteria inoculated with different concentrations of L. inermis. These results confirmed the antibacterial activity of henna leaves and supported the traditional use of the plant in therapy of bacterial infections and disturbances that occurred at the biochemical level. The broth extract of the L. inermis leaves showed obvious antibacterial activity against E. coli.     

Validation of scanning electron microscope (SEM), energy dispersive X-ray (EDX) and gamma spectrometry to verify source nuclear material for safeguards purposes

Ten ore samples, two unpurified yellow cake samples and natural uranyl nitrate hexahydrate sample were analyzed by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray (EDX) method to verify source nuclear material. Samples represent source nuclear material as possible. All samples were scanned at ideal conditions; working distance = 10 mm, voltage = 30 kV, magnification value = × 100, spot size = 50 to screen samples for the presence of uranium and thorium, Also Hyper pure germanium (HPGe) gamma spectrometers were applied to estimate the uranium and thorium contents in Bq/kg (ppm). For the ore samples uranium-238 ranges from 1,049.23 Bq/kg (85.30 ppm) to 2,096.06 Bq/kg (170.41 ppm), uranium-235 ranges from 47.51 to 105.61 Bq/kg and thorium-232 ranges from 22.84 Bq/kg (5.65 ppm) to 41.78 Bq/kg (10.34 ppm). For the yellow cake samples and uranyl nitrate hexahydrate uranium-238 ranges from 42.99 Bq/kg (3.50 ppm) to 71,887.2 Bq/kg (5,844.49 ppm) and thorium-232 is 4.78 Bq/kg (1.83 ppm) and the other two samples are lower than the detection limit.