Determination of phosphorus in steel by the combined technique of laser induced breakdown spectrometry with laser induced fluorescence spectrometry

Laser induced breakdown spectrometry (LIBS) combined with laser induced fluorescence spectrometry (LIFS) has been applied for detection of trace-level phosphorus in steel. The plasma induced by irradiation of Nd:YAG laser pulse for ablation was illuminated by the 3rd harmonic of Ti:Sapphire laser tuned to one of the resonant lines for phosphorus in the wavelength region of 253–256 nm. An excitation line for phosphorus was selected to give the highest signal-to-noise ratio. Fluorescence signals, P213.62 and P214.91 nm, were observed with high selectivity at the contents as low as several tens µg g^− 1. Fluorescence intensities were in a good linear correlation with the contents. Fluorescence intensity ratio of a collisionally assisted line (213.62 nm) to a direct transition line (214.91 nm) was discussed in terms of the analytical conditions and experimental results were compared with a calculation based on rate equations. Since the fluorescence signal light in the wavelength range longer than 200 nm can be transmitted relatively easily, even through fiber optics of moderate length, LIBS/LIFS would be a versatile technique in on-site applications for the monitoring of phosphorus contents in steel.     

Crystal Structures of Mono-, Di-, and Tri(p-tert-butyl)-thiacalix[4]arenes: Dimeric Self-inclusion Behavior

X-Ray crystal structures of the mono-, di-, and tri(p-tert-butyl)-substituted thiacalix[4]arenes (TC4As; 1, 2, and 3, respectively) have beendetermined. TC4As 1–3 adopt a cone conformation and form dimeric self-inclusion units in such a manner that phenol moieties are inserted into the cavity of each molecule. In all the crystal structures of 1–3, lateralface-to-face interactions exist between the phenol rings that do not bear a tert-butyl substituent, and seemingly, this molecular assembly stabilizes the formation of self-inclusion. TC4As 1 and 2 adopt a cone conformation with C₂ symmetry, leading to the formation of rim-to-rim intermolecular hydrogenbonds so as to link the dimeric units up and down. On the other hand, 3 adopts a regular cone conformation with C₄ symmetry to form cyclic hydrogen bonds withinthe rim part of TC4A.     

Unravelling the anticancer potency of 1,2,4-triazole-N-arylamide hybrids through inhibition of STAT3: synthesis and in silico mechanistic studies

Molecular Diversity - The discovery of potent STAT3 inhibitors has gained noteworthy impetus in the last decade. In line with this trend, considering the proven biological importance of...     

Chemoenzymatic synthesis of (2S,3S,4S)-form, the physiologically active stereoisomer of dehydroxymethylepoxyquinomicin (DHMEQ), a potent inhibitor on NF-κB

A new route for (2S,3S,4S)-form, the physiologically active stereoisomer of dehydroxymethylepoxyquinomicin (DHMEQ), a potent NF-κB inhibitor, was established by chemoenzymatic approach. Elaboration on the asymmetric epoxidation of a p-benzoquinone monoketal with benzylcinchonidinium tert-butylhydroperoxide yielded an epoxyenone, in 79.8% ee and 57% yield in reproducible manner. By way of the transformation of this key intermediate to enantiomerically pure (2S,3S,4S)-DHMEQ, the contaminating undesired enantiomer could be effectively removed by applying Burkholderia cepacia lipase-catalyzed hydrolysis of diacylated precursor. The above integrated combination of chemical asymmetric synthesis and enzyme-catalyzed kinetic resolution enabled us to prepare active DHMEQ in a large-scale.     

On Subordination Chains with Normalization Given by a Time-dependent Linear Operator

In this paper we are concerned with solutions, in particular with univalent solutions, of the Loewner differential equation associated with non-normalized subordination chains on the Euclidean unit ball B ⁿ in \mathbbCⁿ{\mathbb{C}^n}. The main result is a generalization to higher dimensions of a well known result due to Becker. Various particular cases of this result have been recently obtained for subordination chains with normalization Df(0,t)=e^tI_n{Df(0,t)=e^tI_n} or Df(0, t) = e ^tA , t ≥ 0, where A ? L(\mathbbCⁿ,\mathbbCⁿ){A\in L(\mathbb{C}^n,\mathbb{C}^n)}. We also determine the form of the standard solutions to the Loewner differential equation associated with generalized spirallike mappings. In the last section we obtain the form of the solution in the presence of coefficient bounds.     

Ion chromatography of nitrite at the ppb level with photometric measurement of iodine formed by post-column reaction of nitrite with iodide

The difficulty in ion-chromatographic determination of nitrite in aqueous solutions containing a high concentration of chloride arises mainly from incomplete resolution of the peaks for these anions on the separation column whose efficiency is not high. A photometric measurement of iodine formed by a reaction of nitrite with iodide has been found to make it possible to determine, chromatographically, trace amounts of nitrite without any interference from chloride; chloride does not oxidize iodide to produce iodine. The proposed method was based on the separation of nitrite from matrix anions on a silica-based anion-exchange column with a 1.5·10⁻³ M phthalate eluent (pH 5.0), followed by photometric measurement of the iodine (as triiodide) formed via a post-column reaction of the separated nitrite with iodide. The optimal conditions for the post-column reaction were established by varying the concentrations of iodide, copper(II) and nitric acid in a post-column-reaction solution and the length of a reaction tube. A calibration graph for nitrite, plotted as peak heights versus concentrations, was linear up to 1.50·10⁻⁵ M (690 ppb). The detection limit, defined at S/N=3, was 1.00·10⁻⁷ M (4.60 ppb) nitrite. The presence of chloride ions up to 0.01 M did not give any interference to the determination of nitrite. This method was successfully applied to the determination of nitrite in lake water, river water, sewage works water and snow samples without any pretreatment.     

Aggregation structure and mechanical properties of functionally graded polyurethane elastomers

Functionally graded polyurethane elastomers (FGPUEs) were prepared with two molds fixed at different temperatures (30 and 150 °C). The effects of the molar ratio of the curing agent (60/40, 75/25, or 97/3 1,4‐butane diol/1,1,1‐trimethylol propane) and the molecular weight of the polymer glycol (number‐average molecular weight = 2000 or 3000) on the molecular aggregation state and mechanical properties of the FGPUEs were investigated with differential scanning calorimetry, polarized optical microscopy, dynamic viscoelastic measurements, and tensile tests. The aggregation state of the FGPUEs was changed continuously from the one side (lower temperature side) to the other side (higher temperature side); for example, the glass‐transition temperature gradually increased in this direction. Also, the number of spherulites formed in the FGPUEs increased in the same manner. In the mechanical tests, the tensile strength and elongation at break of the lower temperature side were higher than those of the higher temperature side. This was correlated with the strong phase separation of the lower temperature side. The poly(oxytetramethylene glycol)‐based FGPUE with a chain extender of 75 wt % showed the largest degree of the temperature gradient. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2355–2363, 2003     

Control system of stockers in radioisotopes storage room using a personal computer

This paper describes a control system of stockers for radioactive source in storage room at laboratory for tracer experiment. The system is composed of a personal computer, a locker controller, three card readers, a monitor TV, and a video tape recorder (VTR). The personal computer controls other equipment with a registered user's number. When a user inserts an identification card into the card reader, the computer memorizes assigned gate number, the user's number and the time; it processes those data and prints out a document. The locker controller releases the electric key of user's locker which is designated by the computer. The VTR records the person entering into the storage room to identity if he uses his card. This system proved to effectively prevent intrusion into the storage room of an unregistered person or to use carelessly other user's source; in addition it can record precisely the stock of radioactive source.     

Adsorption and decomposition of NO on K-deposited Pd(1 1 1)

The adsorption and decomposition of NO on a K-deposited Pd(1 1 1) surface were investigated using X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, and temperature-programmed desorption. For the K-deposited Pd(1 1 1) surface, two different NO adsorption sites were observed in addition to the Pd site. On the clean Pd(1 1 1) surface, the adsorption of NO was purely molecular and reversible, but on the K-deposited surface, the adsorbed NO decomposed at two different temperatures, 530 and 610 K. These results indicate that the NO adsorption and decomposition sites were newly created by the deposition of K onto the Pd(1 1 1) surface.     

Computation of a two-dimensional stress intensity factor by the boundary element method

Summary This paper presents a boundary element formulation for elastostatic problems. The formulation is expressed in terms of the matrix notation, so that it is easily applicable to an available system of matrix structural analysis. A computer program developed is used to calculate the stress intensity factor K _I for some example problems in plane elasticity. Comparison is made between the boundary element calculations and other solutions, whereby the effectiveness of the boundary element method is demonstrated.

---

Berechnung eines zweidimensionalen Spannungsintensitätsfaktors mit der Methode der Bandelemente

Übersicht Dieser Aufsatz bietet eine Formulierung elastostatischer Probleme durch die Methode der Randelemente an. Die Formulierung benutzt eine Darstellung in Matrizenbezeichnung, so daß sie auf ein verfügbares System für Matrizenstrukturberechnung einfach anwendbar ist. Ein ausgebautes Computerprogramm wird auf die Berechnung des Spannungsintensitätsfaktors K _i für einige Beispiele in der ebenen Elastizität angewendet. Die mittels der Randelemente erhaltenen Ergebnisse werden mit anderen Lösungen verglichen. Dadurch zeigt sich die Wirksamkeit der Methode der Randelemente.