Separation of positional isomers by the use of coupled shape-selective stationary phase columns

The successful separation of 2- and 3-methyl-substituted positional isomers of butanol, butyl acetate, and butanoic acid and its ethyl ester, is reported. These compounds are of interest in the study of wine flavour, however the separation of the 2- and 3-methyl isomers may present problems, and more so in the presence of the wine matrix components, when single capillary column gas chromatography (GC) is used. The strategy to achieve separation was based on the use of shape-selective cyclodextrin derivative (CDD) capillary columns (commonly referred to as chiral columns). These columns provide simultaneous resolution of the enantiomeric pairs of the 2-methyl isomers, and at the same time the ability to separate the 3-methyl isomer from the 2-methyl is achieved in all but the case of the ( S)-2- and 3-methylbutanol. The advantages of using shape-selective columns to perform this study is demonstrated, with coupling of two CDD columns giving improved separations of these compounds. Although these compounds are relatively volatile, cryogenic modulated comprehensive two-dimensional GC was shown to provide good pulsed peak profiles with chiral separation in the first dimension when a thicker film trapping column segment was employed. The components of interest were well separated from other wine matrix components.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Bienzymatic analytical microreactors for glucose, lactate, ethanol, galactose and l-amino acid monitoring in cell culture media

A new alternative method for bioprocess monitoring based on bienzymatic analytical microreactors integrated in a flow injection analysis (FIA) system is described. Glucose-, alcohol-, lactate-, galactose- and l-amino acid oxidases (GO, AO, LacO, GalO and LAAO) and horseradish peroxidase (HRP) are immobilized on controlled pore glass (CPG) and used for the development of glucose, ethanol, lactate, galactose and amino acid sensors. The analytical methodology is based on HRP catalysed reaction of hydrogen peroxide produced by oxidases with phenol-4-sulfonic acid and 4-aminoantipyrine. The immobilized enzymes are characterized and used for preparation of the packed bed analytical microreactors. Shelf life and operational stability of the microeactors are determined. GO/HRP, AO/HRP and LAAO/HRP microreactors showed excellent shelf life, they could be stored and reused for more than 6 months with no or very little activity loss, while GalO/HRP and LacO/HRP could be stored for shorter periods of time (10-20 days). Operational stability of GO and LacO microreactors was very good: an equivalent to 16,900 FIA injections of 25 μl to a LacO microreactor resulted in loss of half of its activity, immobilized GO was so stable that it was impossible to evaluate enzyme halflife. Immobilized GalO and LAAO lose their operational activity much faster: approximately 1400 and 8000 FIA injections of the respective substrate solution in a FIA set-up resulted in 50% activity loss. The methods with all the described microreactors were successfully validated using off-line samples from S. cerevisiae, E. coli and mesenchymal stem cell cultures with HPLC as the reference method.     

In-situ probing of the biotic-abiotic boundary of plants by laser desorption/ionization time-of-flight mass spectrometry

Laser desorption/ionization time-of-flight (LDI-TOF) mass spectrometry was applied for the direct analysis of cuticular waxes on intact plant tissues. Cuticular wax compounds were ionized by laser desorption in the presence of colloidal silver. Silver-adduct ions were detected on samples from Arabidopsis thaliana and from maize. Good spot-to-spot reproducibility indicated homogeneous coverage of the sample by the fine colloidal material. The results were consistent with GC-MS analyses of cuticular extracts, thus confirming the feasibility of direct analysis based on this protocol. Molecular masses of the adduct ions correspond well with the known composition of cuticular waxes. Moreover, LDI-TOF gave good estimates of the relative local abundances of a given compound. However, bias was found in cases where compounds with different ionization efficiencies were analyzed.     

A thorough study of the surface wax of apple fruits

The composition of the surface waxes of three apple ( Malus domestica L.) cultivars ("Florina", "Golden B" and "Ozark Gold") has been studied by means of spectroscopic and GC–MS analysis of the class-fractionated mixture of components. Odd n -alkanes, mainly C₂₇ and C₂₉ molecules, are prevalent in the saturated fraction. Small concentrations of alkenes were also found; the C_28:1 component is strongly (72%) in excess over the other 1-alkenes. Straight-chain esters (mainly of palmitic acid) of saturated primary alcohols (C₁₈–C₃₀) were also detected; whereas the acyl moiety is made up essentially of an even number of carbons, the alcohol counterpart does not exhibit this characteristic. Aldehydes are present (C₂₀–C₃₀) with the homologue patterns C₂₆–C₃₀ most strongly represented. Straight-chain free secondary alcohols characterize the waxes of "Florina" and "Ozark Gold"; the hydroxy function is located far from the extremity of the carbon framework. Outstanding is the presence of three alcohols with 29 carbon centres. These alcohols are accompanied by free straight-chain primary alcohols, mainly with even-numbered carbon chains in the range C₂₆–C₃₀. Free fatty acids are present; all of have a framework of even-numbered carbon chains mainly in the range C₁₆–C₂₀. C_18:1 (oleic acid) is well represented.     

Novel CFCs-substitutes recommended by EPA (hydrofluorocarbon-245fa and hydrofluoroether-7100): Ion chemistry in air plasma and reactions with atmospheric ions

The ion chemistry of the title compounds, a nonafluorobutyl methyl ether and a hydrofluoropropane, is elucidated by a combination of studies using atmospheric pressure ionization mass spectrometry and triple quadrupole mass spectrometry. In the positive ion mode, the hydrofluoroether readily forms an [M - F]+ ion, attributable to hydronium ion induced dehydrofluorination, the product of which can be further hydrated to give a protonated hydrofluoroester. By contrast, the hydrofluoropropane does not react with the hydronium ion but rather gives hydrofluoroalkenylium cations via H atom and F atom abstraction by the dioxygen radical cation. In the negative ion mode, the fluorobutyl methyl ether undergoes dissociative electron capture with O2-*, O2-*(H2O), O3-*, and NO2- to generate the fluorobutoxy anion, which can dissociate by CF2[doublebond]O loss to give the perfluorocarbanion when the precursor ions are internally excited. The hydrofluoropropane reacts readily with common atmospheric anions to form molecular complexes with F-, O2-*, and O3-* and the strongly H-bonded species, O2-*(HF) and F-(HF). Interestingly, isomeric pentafluoropropanes form in the reaction with O2-*, either O2-*(HF) or F-(HF), depending on the specific pattern of the fluoro substitution.     

Studies on phosphatidylserine by tandem quadrupole and multiple stage quadrupole ion-trap mass spectrometry with electrospray ionization: Structural characterization and the fragmentation processes

Low-energy CAD product-ion spectra of various molecular species of phosphatidylserine (PS) in the forms of [M−H]⁻ and [M−2H+Alk]⁻ in the negative-ion mode, as well as in the forms of [M+H]⁺, [M+Alk]⁺, [M−H+2Alk]⁺, and [M−2H+3Alk]⁺ (where Alk=Li, Na) in the positive-ion mode contain rich fragment ions that are applicable for structural determination. Following CAD, the [M−H]⁻ ion of PS undergoes dissociation to eliminate the serine moiety (loss of C₃H₅NO₂) to give a [M−H−87]⁻ ion, which equals to the [M−H]⁻ ion of a phoshatidic acid (PA) and give rise to a MS³-spectrum that is identical to the MS²-spectrum of PA. The major fragmentation process for the [M−2H+Alk]⁻ ion of PS arises from primary loss of 87 to give rise to a [M−2H+Alk−87]⁻ ion, followed by loss of fatty acid substituents as acids (R_xCO₂H, x=1,2) or as alkali salts (e. g., R_xCO₂Li, x=1,2). These fragmentations result in a greater abundance of [M−2H+Alk−87−R₂CO₂H]⁻ than [M−2H+Alk−87−R₁CO₂H]⁻ and a greater abundance of [M−2H+Alk−87−R₂CO₂Li]⁻ than [M−2H+Alk−87−R₁CO₂Li]⁻; while further dissociation of the [M−2H+Alk−87−R_{2(or 1)}CO₂Li]⁻ ions gives a preferential formation of the carboxylate anion at sn-1 (R₁CO₂⁻) over that at sn-2 (R₂CO₂⁻). Other major fragmentation process arises from differential loss of the fatty acid substituents as ketenes (loss of R_x′CH=CO, x=1,2). This results in a more prominent [M−2H+Alk−R₂′CH=CO]⁻ ion than [M−2H+Alk−R₁′CH=CO]⁻ ion. Ions informative for structural characterization of PS are of low abundance in the MS²-spectra of both the [M+H]⁺ and the [M+Alk]⁺ ions, but are abundant in the MS³-spectra. The MS²-spectrum of the [M+Alk]⁺ ion contains a unique ion corresponding to internal loss of a phosphate group probably via the fragmentation processes involving rearrangement steps. The [M−H+2Alk]⁺ ion of PS yields a major [M−H+2Alk−87]⁺ ion, which is equivalent to an alkali adduct ion of a monoalkali salt of PA and gives rise to a greater abundance of [M−H+2Alk−87−R₁CO₂H]⁺ than [M−H+2Alk−87−R₂CO₂H]⁺. Similarly, the [M−2H+3Alk]⁺ ion of PS also yields a prominent [M−2H+3Alk−87]⁺ ion, which undergoes consecutive dissociation processes that involve differential losses of the two fatty acyl substituents. Because all of the above tandem mass spectra contain several sets of ion pairs involving differential losses of the fatty acid substituents as ketenes or as free fatty acids, the identities of the fatty acyl substituents and their positions on the glycerol backbone can be easily assigned by the drastic differences in the abundances of the ions in each pair.     

A contribution to the trace analysis of high-purity iron by atomic spectrometry (flame-AAS, furnace-AAS, ICP-OES)

Summary Various possibilities for the determination of trace impurities in high-purity iron by atomic spectrometry were investigated in detail. For Ba, Bi, Cd, Co, Cr, Cu, Mn, Ni, Pb, Ti and V, flame AAS, furnace AAS and ICP-OES were firstly evaluated in terms of their power of detection. Detection limits in the g/g-range could be achieved by direct determination. For determination in the ng/g-range a removal of iron by a solvent extraction technique prior to the instrumental measurement was required. The power of detection of direct determination, and of combined procedures were compared with regard to routine applicability and a minimization of systematic errors.     

Quantification of polychlorinated biphenyls (PCBs) and hexachlorobenzene (HCB) in the picogram/liter range in water of the river Elbe

Sampling and determination of dissolved and particlebound PCBs and HCB in the river Elbe are described. A new filtration/adsorption unit for sampling of dissolved lipophilic contaminants was developed. The detection limit for dissolved PCBs and HCB was 5 pg/l. The data show that more than 98% of the PCBs and of HCB in the water of the river Elbe are particle-bound.     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.