The electronic structure,solvatochromism, and electric dipole moments of new Schiff base derivatives using absorbance and fluorescence spectra

Structural Chemistry - The electronic structure and electronic transitions of four new mono Schiff base derivatives are interpreted by using absorption and fluorescence spectra including 28...     

Effect of silver coating on electrochemical performance of 0.5Li2MnO3.0.5 LiMn1/3Ni1/3Co1/3O2 cathode material for lithium-ion batteries

Journal of Solid State Electrochemistry - In this work, a Li-rich layered 0.5Li2MnO3.0.5LiMn1/3Ni1/3Co1/3O2 (LMNCO) pristine cathode material synthesized with a glycine-nitrate combustion method is...     

Synthesis,characterization, antioxidant,and antibacterial activities of new 2,3-dimethoxy and 3-acetoxy-2-methyl benzamides

Research on Chemical Intermediates - We performed a series of novel benzamide compounds which were synthesized starting from 2,3-dimethoxybenzoic acid or 3-acetoxy-2-methylbenzoic acid and amine...     

Surface Propensity of Anions in a Binary Ionic-Liquid Mixture Assessed by Full-Range Angle-Resolved X-ray Photoelectron Spectroscopy and Surface-Tension Measurements

Angle-resolved X-ray photoelectron spectroscopy and contact-angle measurements guided by a signal attenuation model are utilized to extract molar composition and anion enrichment in the vacuum interface of a binary ionic liquid mixture, having a common quaternary ammonium cation and two different anions. By using the intensity ratio of the F1s peaks belonging to the two different anions recorded at the full electron take-off angle range, from 0° to 80°, we have determined that only a fractionally covered and anion enriched surface layer can predict the AR-XPS data, which is also consistent with surface tension measurements. Moreover, the more bulky and non-spherical anion enrichment is evident even at the conventional and the so assumed bulk sensitive take-off angle of 0°. This methodology provides a surface enrichment factor of the molecular ions and clearly serves as an experimental evidence for recently debated surface layering and/or island structure in ionic liquid systems.     

The performance,emissions, and combustion characteristics of an unmodified diesel engine running on the ternary blends of pentanol/safflower oil biodiesel/diesel fuel

Journal of Thermal Analysis and Calorimetry - The objective of the present study is to scrutinize the influence of a binary blend of diesel–safflower oil biodiesel and ternary blends of...     

A comparative analysis of machine learning techniques and fuzzy analytic hierarchy process to determine the tacit knowledge criteria

Knowledge management is widely considered as a strategic tool to increase firm performance by enabling the reuse of organizational knowledge. Although many have studied knowledge management in a variety of business settings, the concept of tacit knowledge, especially the individual one, has not been explored in due detail. The objective of this study is to identify and prioritize individual tacit knowledge criteria and to explain their effects on firm performance. In the proposed methodology, first, the most prevalent individual tacit knowledge variables are identified by means of knowledge elicitation and feature selection methods. Then, the extracted variables were prioritized using machine learning methods and fuzzy Analytic Hierarchy Process (AHP). Support vector machine (SVM), logistic regression, and artificial neural networks are used as the first approach, followed by fuzzy AHP as the second approach. Based on the comparative analysis results, SVM (as the best-performed machine-learning technique) and fuzzy AHP methods were identified for the subsequent analysis. The results showed that both SVM and fuzzy AHP determined time efficiency of employees, communication between employees and supervisors, and innovative capability of employees as the most important tacit knowledge criteria. These findings are mostly supported by the extant literature, and collectively shows the synergistic nature of the utilized analytics approaches in determining individual tacit knowledge criteria.

     

Nickel electrodes as a cheap and versatile platform for studying structure and function of immobilized redox proteins

Practical use of many bioelectronic and bioanalytical devices is limited by the need of expensive materials and time consuming fabrication. Here we demonstrate the use of nickel electrodes as a simple and cheap solid support material for bioelectronic applications. The naturally nanostructured electrodes showed a surprisingly high electromagnetic surface enhancement upon light illumination such that immobilization and electron transfer reactions of the model redox proteins cytochrome b₅ (Cyt b₅) and cytochrome c (Cyt c) could be followed via surface enhanced resonance Raman spectroscopy. It could be shown that the nickel surface, when used as received, promotes a very efficient binding of the proteins upon preservation of their native structure. The immobilized redox proteins could efficiently exchange electrons with the electrode and could even act as an electron relay between the electrode and solubilized myoglobin. Our results open up new possibility for nickel electrodes as an exceptional good support for bioelectronic devices and biosensors on the one hand and for surface enhanced spectroscopic investigations on the other hand.     

Synthesis,spectroscopic and spectrophotometric study of BODIPY appended crown ether sensor for ion detection

A novel fluoroionophore compound was synthesized from a boron dipyrromethene (BODIPY) fluorophore and 4′-formylbenzo-15-crown-5 ionophore groups. Photophysical properties of the BODIPY-crown compound were studied with UV–Vis and fluorescence spectroscopy. The effect of metalic cations (Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Al³⁺, Fe³⁺, Cu²⁺, Co²⁺, Zn²⁺, Ag⁺, Hg²⁺, Pb²⁺) on the absorption and fluorescence spectra of compound 2 was investigated. Blue shifts were detected in UV–Vis spectra upon addition of some metal ions (Al³⁺ > Fe³⁺ > Na⁺). At the same time, the emission intensity of this complex increased due to binding of Na⁺ ion to the benzo crown cavity. Additionally, a decrease in the intensity of the 630 nm emission peak and an increase in the intensity of the 570 nm emission peak was observed in the fluorescence emission spectra following addition of Al³⁺ and Fe³⁺ ions.     

Synthesis and Characterization of Magnesium Pyroborate by Solution Combustion and Conventional Ceramic Methods: A Comparative Study

Solution Combustion Synthesis (SCS) and ConventionalCeramic Process (CCP) were applied for the preparation of magnesium pyroborate (Mg₂B₂O₅) from Mg(NO₃)₂ · 6H₂O and H₃BO₃. Structural and morphological properties of the products were comparatively examined by XRD and FT‐IR spectroscopic measurements as well as SEM and BET techniques. The effects of synthesis conditions on the properties of products were investigated throughly by optimizing the B/Mg molar ratio and reaction duration in CCP and by optimizing the fuel (carbohydrazide) quantity in SCS. Pure Mg₂B₂O₅ (triclinicsuanite) was obtained by thermal treatment in CCP employing a B/Mg molar ratio of 3:1. It was found that the fuel must be in close proximity to the stoichiometric requirements in order to obtain the desired product in highly crystalline form from SCS. The Mg₂B₂O₅ samples obtained by both methods exhibited similar structural properties but different morphologies.     

Grafting of Acrylamide On 1, 1, 2, 2-Tetra-Chloroethane Preswelled Polyethylene Terephthalate) Films Using Azobisisobutyronitrile Initiator

Abstract

Graft polymerization of acrylamide (AAm) on 1, 1, 2, 2 tetrachloro-ethane (TCE) preswelled poly(ethylene terephthalate) (PET) films were performed with chemical initiation method using asobisiso-butyronitrile (AIBN) initiator. Temperature was found to have a greater effect on the swelling then the swelling time. Variation of the graft yield with polymerization temperature, time, AIBN concentration, AAm concentration, AIBN and AAm inclusion times were investigated. The optimum temperature for grafting was found to be 70°CC. The graft yield was observed to increase with polymerization time, AAm concentration, initiator and monomer diffusion time up to a saturation graft yield and then leveled off. An increase in AIBN concentration first enhanced the percent grafting then showed a decrease. The addition of some salts (Ni²⁺, Cr³⁺, Co²⁺, Cu²⁺) on the rate of grafting was also investigated. From the temperature dependence of the initial rate of grafting, the overall activation energy was found to be 4. 1 kcal/mol and relevant rate equation have been derived. The effect of grafting on film propities, such as water absorption capacity, intrinsic viscosity were determined. Grafted films were characterized by FTIR spectros-copy and scanning electron microscopy (SEM).