Practical synthesis of a neuropeptide Y antagonist via stereoselective addition to a ketene

[Reaction: see text]. The synthesis of neuropeptide Y antagonist 1, currently under clinical investigation for the treatment of obesity, is described. The convergent synthesis from trans-spirolactone carboxylic acid intermediate 2a and aminopyrazole 3 is predicated on a stereoselective route to the former. The coupling reaction of ethyl 4-oxocyclohexanecarboxylate (10a) with lithiated isonicotinamide 11 was investigated in detail, but even optimized conditions only provided a 45:55 ratio of trans:cis isomers (12a:12b). While selective crystallization schemes were developed to isolate the thermodynamically less stable trans isomer 2a, improved stereocontrol was subsequentially achieved by the application of ketene chemistry. The ketene formation and quench was investigated under a variety of conditions aimed at maximizing the trans:cis ratio. Reacting a mixture of carboxylic acids 2a and 2b with POCl3 in THF, followed by concomitant addition of tert-butyl alcohol in the presence of TMEDA at 35 degrees C provided a 4:1 ratio of trans:cis tert-butyl esters (18a:18b) via in situ ketene formation. Ester hydrolysis, followed by selective crystallization of undesired 2b as the HCl salt, led to isolation of 2a in 47% overall yield. Aminopyrazole intermediate 3 was synthesized via the condensation reaction of 2-fluorophenylhydrazine hydrochloride (4a) with acrylonitrile derivative 5 in 65-70% yield. Coupling of advanced intermediates 2a and 3b via activation with thionyl chloride gave a 92% yield of 1.     

Crystal structure of a methyl(methoxy)carbene complex of nickel(II), trans-[Ni(C6Cl5)(PMe2Ph)2{C(OMe)Me}]BF4

The structure of a nickel(II) complex, trans-[Ni(C₆Cl₅)(PMe₂Ph)₂{C(OMe)Me}]BF₄, containing the simplest alkyl(alkoxy)carbene ligand has been determined by X-ray crystallography (R = 0.091). The geometry around the nickel atom is square-planar. The comparatively short NiC(1) bond length of 1.843(10) Å showed the presence of π-bonding in the nickel-carbene bond.     

Shipboard analysis of picomolar levels of manganese in seawater by chelating resin concentration and chemiluminescence detection

A new shipboard analytical method for determining picomolar levels of manganese in seawater has been developed. The method is based on a combination of chelating resin column extraction and improved chemiluminescence (CL) detection in a closed flow system. In this method, manganese in sample solution is selectively collected on newly-developed iminodiacetate-immobilized chelating resin, and then eluted with acidic solution containing hydrogen peroxide. The resulting eluent is mixed with luminol solution and aqueous ammonia after removal of iron ions by a chelating resin column, and then the mixture is introduced into the CL cell. The manganese concentration is obtained from the CL intensity. The detection limit (3SD) of manganese is 5 pmol L^–1 from 9 mL of seawater sample. The method was applied to seawater samples collected at the Okinawa Trough.     

Rationale for the acidity of Meldrum's acid. Consistent relation of C-H acidities to the properties of localized reactive orbital

Detailed investigation on the origin of the acidity of the alpha-protons of a set of the carbonyl molecules was carried out on the basis of properties of the localized molecular orbital. An anomalously high acidity of Meldrum's acid, as compared with those of dimedone and dimethyl malonate, is one of the well-known but unresolved issues. The well-localized sigma orbitals of the C-H bonds at the alpha-position of the carbonyl groups can be obtained with the reactive hybrid orbital (RHO) theory. We found that the energy levels of the unoccupied RHOs of the C-H moiety of Meldrum's acid and other carbonyl compounds showed a good linear correlation with the experimental deprotonation energies. This is probably because the deprotonation reaction to form the proposed naked anions in a polar solvent is a highly endothermic process, in which the thermodynamic energy differences between the neutral molecules and the corresponding anions approximately coincide with the activation energies. We also investigated the effect of the conformational change upon deprotonation on the electron-accepting energy level of the relevant C-H bonds of cyclic/acyclic and monocarbonyl/dicarbonyl compounds. A conformational change occurs in the cases of cyclic six-membered compounds, but its influence on the reactivity of the C-H bond is small. The acidity of dicarbonyl compounds, including Meldrum's acid, showed a good correlation with the deviations from the perpendicular position of the dihedral angles of the relevant C-H bond with respect to the adjacent carbonyl C=O bond. This angle parameter can be related to the magnitude of the in-phase orbital interaction between the sigma(CH) and pi(C)(=)(O) orbitals, which facilitate electron acceptance. These results indicated that the acidity of the alpha-proton of carbonyl compounds can be represented in terms of the electron-accepting orbital levels of the unoccupied RHO of the C-H moiety. All the linear relationships found in the present work strongly suggested that the acidity of Meldrum's acid, which is conventionally regarded as an anomaly, is consistent with those of the other carbonyl compounds.     

Blue copper model complexes with distorted tetragonal geometry acting as effective electron-transfer mediators in dye-sensitized solar cells

The electron self-exchange rate constants of blue copper model complexes, [(-)-sparteine-N,N'](maleonitriledithiolato-S,S')copper ([Cu(SP)(mmt)])(0/)(-), bis(2,9-dimethy-1,10-phenanthroline)copper ([Cu(dmp)(2)](2+/+)), and bis(1,10-phenanthroline)copper ([Cu(phen)(2)](2+/+)) have been determined from the rate constants of electron transfer from a homologous series of ferrocene derivatives to the copper(II) complexes in light of the Marcus theory of electron transfer. The resulting electron self-exchange rate constant increases in the order: [Cu(phen)(2)](2+/+) < [Cu(SP)(mmt)](0/)(-) < [Cu(dmp)(2)](2+/+), in agreement with the order of the smaller structural change between the copper(II) and copper(I) complexes due to the distorted tetragonal geometry. The dye-sensitized solar cells (DSSC) were constructed using the copper complexes as redox couples to compare the photoelectrochemical responses with those using the conventional I(3)(-)/I(-) couple. The light energy conversion efficiency (eta) values under illumination of simulated solar light irradiation (100 mW/cm(2)) of DSSCs using [Cu(phen)(2)](2+/+), [Cu(dmp)(2)](2+/+), and [Cu(SP)(mmt)](0/)(-) were recorded as 0.1%, 1.4%, and 1.3%, respectively. The maximum eta value (2.2%) was obtained for a DSSC using the [Cu(dmp)(2)](2+/+) redox couple under the light irradiation of 20 mW/cm(2) intensity, where a higher open-circuit voltage of the cell was attained as compared to that of the conventional I(3)(-)/I(-) couple.     

Semi-micro size-exclusion chromatography: Molecular-weight measurement of poly (ethylene terephthalate) and separation of oligomers and prepolymers

Summary Several polystyrene gels of different pore sizes were packed into a 500 mm×2.1 mm I.D. column. Semi-micro size-exclusion chromatography (SEC) using these columns was carried out with a system consisting of a triple piston pump, a micro loop injector and a flow cell with 1.0-μl cell volume constructed for semi-micro HPLC, because the dead volume of the injector and the cell volume of flow cell for conventional HPLC caused a significant loss in column efficiency. The effects of sample amount, injection volume and mobile phase flow rate on column efficiency and retention volume were examined and the optimized operational variables of the sample amount (below 500 μg), the injection volume (less than 15 μl) and the flow rate range (30–70 μl/min) determiend for semi-micro SEC. Oligostyrene, epoxy resin, phenol-formaldehyde resin and phthalates were analyzed by the optimized semi-micro SEC system under the given conditions. In addition, molecular weight distribution of four different poly(ethylene terephthalate) films was successfully measured by using a mixture of chloroform and hexafluoroisopropanol as the eluent.     

Secondary structural changes of chymotrypsinogen A,alpha-chymotrypsin,and the isolated polypeptides Cys1-Leu13, Ile16-Tyr146, and Ala149-Asn245 in sodium dodecyl sulfate,urea and guanidine hydrochloride

Secondary structural changes of chymotrypsinogen A,-chymotrypsin, and their isolated polypeptides Cys¹-Leu¹³, Ile¹⁶-Tyr¹⁴⁶, and Ala¹⁴⁹-Asn²⁴⁵were examined in aqueous solutions of sodium dodecyl sulfate (SDS), urea, and guanidine hydrochloride (residue numbers from chymotrypsinogen). After the fragmentation by the cleavage of disulfide bridges in-chymotrypsin, the helical structure was formed in the isolated polypeptide 16–146 where the helical segments do not exist in the protein state. The polypeptide 149–245, where the helical segments of the parent protein are originally located, contained no helices. The polypeptide 1–13 was almost disordered. The three polypeptides, chymotrypsinogen,-chymotrypsin and the polypeptide 16–146, clearly showed differences in the stabilities of helical structures in solutions of urea and guanidine hydrochloride. The addition of SDS accelerated the formation of helical structures in each polypeptide except for 1–13.     

Reactivity of hydroperoxide bound to a mononuclear non-heme iron site

The first isolation and spectroscopic characterization of the mononuclear hydroperoxo-iron(III) complex [Fe(H(2)bppa)(OOH)](2+) (2) and the stoichiometric oxidation of substrates by the mononuclear iron-oxo intermediate generated by its decomposition have been described. The purple species 2 obtained from reaction of [Fe(H(2)bppa)(HCOO)](ClO(4))(2) with H(2)O(2) in acetone at -50 degrees C gave characteristic UV-vis (lambda(max) = 568 nm, epsilon = 1200 M(-1) cm(-1)), ESR (g = 7.54, 5.78, and 4.25, S = (5)/(2)), and ESI mass spectra (m/z 288.5 corresponding to the ion, [Fe(bppa)(OOH)](2+)), which revealed that 2 is a high-spin mononuclear iron(III) complex with a hydroperoxide in an end-on fashion. The resonance Raman spectrum of 2 in d(6)-acetone revealed two intense bands at 621 and 830 cm(-1), which shifted to 599 and 813 cm(-1), respectively, when reacted with (18)O-labeled H(2)O(2). Reactions of the isolated (bppa)Fe(III)-OOH (2) with various substrates (single turnover oxidations) exhibited that the iron-oxo intermediate generated by decomposition of 2 is a nucleophilic species formulated as [(H(2)bppa)Fe(III)-O*].     

Double bond isomerization of 5-vinylbicyclo[2.2.1]hept-2-ene to 5-ethylidenebicyclo[2.2.1]hept-2-ene over alkaline earth oxides

All the alkaline earth oxides exhibit activities for double, bond isomerization of 5-vinylbicyclo[2.2.1]hept-2-ene (VBH) to 5-ethylidenebicyclo[2.2.1]hept-2-ene (EBH) at a reaction temperature of 273 K. The order of the activity on the basis of unit weight of catalyst was CaO>MgO>SrO>BaO when compared under optimum pretreatment conditions. The E/Z ratio in the products is determined by the reaction temperature regardless of the type of catalyst; the ratios were 82/18 and 88/12 for the reaction temperatures of 323 and 273 K, respectively.     

Enantiodifferentiating photoaddition of alcohols to 1,1-diphenylpropene in supercritical carbon dioxide: sudden jump of optical yield at the critical density

In the enantiodifferentiating photoaddition of ROH (R = Me, Et, i-Pr) to 1,1-diphenylpropene sensitized by fructosyl 1,4-naphthalenedicarboxylate in supercritical carbon dioxide, the enantiomeric excess of photoadduct increased with increasing bulkiness of the alcohol at all pressures used, with an accompanying sudden jump at the critical density, for which the enhanced clustering of alcohol, particularly in the subcritical pressure region, was revealed to be responsible from the fluorescence spectral examinations.