Size-tuneable and micro-patterned iron nanoparticles derived from biomolecules via microcontact printing SAM-modified substrates and controlled-potential electrolyses

Site-selected and size-controlled iron nanoparticles were prepared on coplanar surfaces via microcontact printing of SAM-modified Au/mica electrodes and controlled-potential electrolytic reactions using ferritin biomolecules. Ferritin molecules packed like a full monolayer on 6-amino-1-hexanethiol (AHT)- and 11-amino-1-undecanethiol (AUT)-modified Au/mica surface via electrostatic interactions, which did not depend on the chain length of the amino terminal alkane thiols. After heat-treatment at 400 degrees C for 60 min, iron oxide nanoparticles (ca. 5 nm in diameter) derived from ferritin cores were observed at the Au/mica surface by atomic force microscopy (AFM). On the study on the electrochemistry of ferritin immobilized onto AHT- and AUT-modified Au/mica electrodes, the redox response of the ferritin immobilized AHT-modified electrode was clearly observed. On the other hand, no redox peak for ferritin was obtained at the AUT-modified electrode. The electron transfer between ferritin and the electrode through the AUT membrane could not take place. The difference in the electrochemical response of ferritin immobilized onto AHT- and AUT-modified Au/mica was caused by the chain length of the amino terminal alkane thiols. Uniform patterns of AHT and AUT on the Au/mica electrode surface were performed by use of a poly(dimethylsiloxane) (PDMS) stamp. After the immobilization of ferritin onto both AHT- and AUT-modified electrode surfaces, the modified electrode was applied to a -0.5 V potential for 30 min in a phosphate buffer solution. After this procedure, the PDMS stamp patterning image appeared by scanning electron microscopy (SEM) image. The SEM results induced by the size change of the ferritin core consisting of iron(III) by electrolysis.     

Stereocontrolled synthesis of substituted chiral piperidines via one-pot asymmetric 6π-azaelectrocyclization: asymmetric syntheses of (-)-dendroprimine, (+)-7-epidendroprimine, (+)-5-epidendroprimine, and (+)-5,7-epidendroprimine

The asymmetric one-pot 6π-azaelectrocyclization of alkenyl vinyl stannane, ethyl (Z)-2-iodo-4-oxobutenoate, and (-)-7-isopropyl-cis-aminoindanol in the presence of a Pd(0) catalyst stereoselectively produced the tetracyclic aminoacetal compounds, resulting from the four-bond formation accompanying by controlling the stereochemistry at the two asymmetric centers. The produced cyclic aminoacetals can be regarded as synthetic precursors of substituted chiral piperidines, and the syntheses of 2,4- and 2,4,6-substituted piperidines were realized from the obtained aminoacetals by the stereoselective hydrogenation of the double bond conjugated with the C-4 ester group and alkylation at the aminoacetal moiety. In addition, the stereoselective synthesis of an indolizidine alkaloid, (-)-dendroprimine, and its three stereoisomers, (+)-7-epidendroprimine, (+)-5-epidendroprimine, and (+)-5,7-epidendroprimine, were achieved.     

Furanose ring conformations in a 1′-alkynyl C-nucleoside and the dinucleotide

A large-scale synthesis was carried out for alkynyl C-nucleotide oligomers in order to clarify the structural details of the artificial DNA. A liquid-phase synthesis by means of phosphoramidite methodology enabled us to handle ～0.1 g of the DNA oligomers possessing a pseudouracil derivative (T*) as a non-natural nucleobase. ¹H NMR measurements in aqueous media were carried out for the oligomers, succeeded in the accurate assignments of the protons accompanying with determination of the coupling constants (J values). These J values revealed that average conformation of the alkynylribose rings in the DNA was substantially biased toward the S-type conformers (²T₁/E₁/^OT₁). X-ray crystal analysis of the non-natural nucleoside also supported the S-type conformation (²E/²T₁) as seen in natural B-DNA.     

Sugar binding specificities of anti-H(O) lectins disclosed by use of fucose-containing human milk oligosaccharides as binding inhibitors

The binding to normal and sialidase-treated human erythrocytes of six 125I-labeled lectins [Ulex europeus lectin I (UEA-1) and II (UEA-II), Laburnum alpinum lectins I (LAA-I) and II (LAA-II), and Cytisus multiflorus lectins I (CMA-I) and II (CMA-II)], was studied in detail. Quantitative inhibition assays of the lectin binding to the cells were also performed with various human milk oligosaccharides as inhibitors. Based on a comparison of the inhibition constants of the inhibitors thus obtained with the association constants of the lectins to the cells, the relative activities of cell surface blood group antigens toward the lectins are discussed.     

二氧化硅负载[C5Me5]2SmMe(THF)引发甲基丙烯酸甲酯聚合

近年来 ,有许多文献报道茂金属催化剂的负载化及其在烯烃聚合中的应用 ,这对发展新型茂金属催化剂和开发新型高分子材料有重要意义 [1,2 ] .我们 [3]曾报道壳聚糖负载稀土催化剂用于甲基丙烯酸甲酯的配位聚合有优良性能 .以五甲基环戊二烯为配体的有机稀土配合物 ,如 [Sm H( C5Me5) ]2 ,[C5Me5]Ln Me( THF) ( Ln=Sm,Yb)等在甲苯中单组分引发甲基丙烯酸甲酯聚合及内酯开环聚合具有许多优异性能[4 ,5] ,但是经负载化的该类催化剂的聚合性能尚未见报道 .本文报道将 [C5Me5]2 Sm Me·( THF)负载于二氧化硅 ,引发甲基丙烯酸甲酯聚合的结…     

Furopyridines. XXVII. Reactions of 2-methyl and 2-cyano derivatives of furo[2,3-b]-, -[3,2-b]-, - [2,3-c]- and -[3,2-c]pyridine

Bromination of 2-methylfuropyridines 1a-d-Me gave the 3-bromo derivatives 2a-d , while the 2-cyano compounds 1a-d-CN resulted in the recovery of the starting compounds. Nitration of 1a-d-Me and 1a-d-CN did not yield the corresponding nitro derivative, except for 1-c-CN giving 3-nitro derivative 3c in 7% yield. N-Oxidation of 1a-d-Me and 1b-d-CN with m-chloroperbenzoic acid yielded the N-oxides 4a-d-Me and 4b-d-CN , whereas 1a-CN did not afford the N-oxide. Cyanation of N-oxides 4a-d-Me and 4b-d-CN with trimethylsilyl cyanide gave the corresponding α-cyanopyridine compounds 5a-d-Me and 5b-d-CN . Chlorination of 4a-d-Me and 4b-d-CN with phosphorus oxychloride also gave the α-chloropyridine compounds 6b-d-Me and 6b-d-CN , accompanying formation of γ-chloropyridine 6a-Me, 6′b-Me and 6′b-CN , β-chloropyridine 6′b-CN , and α'-chloropyridine derivatives 6′c-Me and 6′c-CN . Acetoxylation of 4a-d-Me and 4b-d-CN with acetic anhydride yielded α-acetoxypyridine compounds 7a-Me and 7b-CN , pyridone compounds 11d-Me, 11c-CN and 11d-CN , 3-acetoxy compounds 8, 9b, 9c , and 2-acetoxymethyl derivatives 10b and 10c.     

Self-exchange reaction kinetics of metallocenes revisited: insights from the decamethylferricenium-decamethylferrocene reaction at variable pressure

Rate constants k(ex) and volumes of activation deltaV(ex) have been obtained using (1)H NMR for the self-exchange reaction of the [(eta(5)-C(5)(CH(3))(5))(2)Fe](+) hexafluorophosphate and tetrafluoroborate with [(eta(5)-C(5)(CH(3))(5))(2)Fe] in acetone-d(6) (deltaV(ex) = -8.6 +/- 0.3 cm(3) mol(-)(1)), dichloromethane-d(2), and (semiquantitatively) in acetonitrile-d(3). Under the experimental conditions, ion pairing was significant only in CD(2)Cl(2), but even that produced only a minor reduction in k(ex) and so had a negligible effect on deltaV(ex) ( = -6.4 +/- 0.2 cm(3) mol(-)(1) with PF(6)(-)). In all cases, deltaV(ex) is negative and consistent with a simple two-sphere activation model, rather than with that of Weaver et al. (Nielson, R. M.; McManis, G. E.; Safford, L. K.; Weaver, M. J. J. Phys. Chem. 1989, 93, 2152) in which the barrier crossing rate is limited by solvent dynamics. Similarly, the approximately 5-fold increase in k(ex) on going from [(eta(5)-C(5)H(5))(2)Fe](+/0) to [(eta(5)-C(5)(CH(3))(5))(2)Fe](+/0) in acetone can be explained with the two-sphere model on the basis of the effects of reactant size on the solvent reorganization energy, without reference to solvent dynamics.     

Homochiral column structure of rac- and lambda-tris(ethylenediamine)cobalt(III) cyclotriphosphate dihydrate in crystal structures and cation-anion association in aqueous solution

rac- and Lambda-tris(ethylenediamine)cobalt(III) cyclotriphosphate dihydrate with the chemical formulas rac-[Co(en)(3)]P(3)O(9).2H(2)O (1) and Lambda-[Co(en)(3)]P(3)O(9).2H(2)O (2) were synthesized, and their crystal structures were determined by single-crystal X-ray analyses. In 1, the cationic complex molecule [Co(en)(3)](3+) with the Delta or Lambda enantiomer and cyclotriphosphate anion are alternately arrayed and connected by multiple hydrogen bonds to form a homochiral column structure. Adjacent homochiral columns with different chirality for 1 are connected by intercolumn hydrogen bonds through P(3)O(9)(3)(-) anions, as the bridging groups, to form a tetrameric cyclic cylindrical structure, while the adjacent columns with the same chirality are connected for 2 to form the cyclic cylindrical structure. All 6 amino groups per [Co(en)(3)](3+) participate in the formation of 12 hydrogen bonds, in which 8 hydrogen bonds contribute to the construction of a homochiral column and the remaining 4 hydrogen bonds contribute to the intercolumn interactions. The circular dichroism spectrum of the aqueous solution of Lambda-[Co(en)(3)](3+) changes drastically when excess P(3)O(9)(3)(-) is added, and this change is explained by ion-pair formation. The thermodynamic association constant of [Co(en)(3)](3+) with P(3)O(9)(3)(-), calculated from the conductivity data, was log K = 4.26 at 25 degrees C.     

Biomaterial coatings by stepwise deposition of silk fibroin

A completely aqueous, stepwise deposition process with Bombyx mori silk fibroin for the assembly of nanoscale thin film coatings is reported the first time. The focus of this work was to develop an understanding of the control of this deposition process and to characterize the films formed from a physicochemical perspective. The deposition process was monitored by UV spectrophotometry and research quartz crystal microbalance. Both absorbance and film thickness correlated linearly with the number of silk fibroin layers deposited, analogous to multilayered materials fabricated from conventional polyelectrolytes. The polymer adsorption process was stable and reproducible, with control of a single layer thickness ranging from a few to tens of nanometers, determined by the concentrations of silk fibroin, salt concentration in the dipping solution, and method of rinsing. The driving force for the assembly of silk fibroin onto the substrate was primarily hydrophobic interactions, while some electrostatic interactions were also involved. The difference with this approach from traditional polyelectrolyte layer-by-layer techniques is that an intervening drying step is used to control the structure and stability of the self-assembled silk fibroin. The assembled films were stable under physiological conditions and supported human bone marrow stem cell adhesion, growth, and differentiation. This approach offers new options to engineer biomaterial coatings as well as bulk materials with control of both interfacial properties conducive to specific cellular or tissue responses and the potential to entrap and deliver labile molecules or other components due to the all-aqueous process described.