Fluorination of 2-alkyl-substituted oxanes. The synthesis and purification of perfluoro(2-alkyl-substituted oxane)s

Five kinds of 2-alkyl-substituted oxanes like 2-ethyloxane, 2-n-propyloxane, 2-iso-propyloxane, 2-n-butyloxane and 2-n-amyloxane were fluorinated electrochemically to give the corresponding perfluoro(2-alkyloxane)s. The perfluoro(2-alkyloxane)s were obtained in good yields from these starting materials together with isomeric perfluoro(2-alkyloxolane)s, perfluoro(2-alkyl-5-methyloxolane)s and perfluoro(dialkyl ether)s. The purification of the perfluoro(2-alkyloxane)s which contained small amounts of isomeric perfluoro(2-alkyloxolane)s was successfully achieved by recovering the former unreacted after treating these mixture with anhydrous aluminum chloride at 150 /sR 160 °C during /sR 48 hrs in order to convert the latter into the easy-separable perfluoro(2,5,5- trichloro-2-alkyloxolane)s. Small quantities of new perfluoro(5,5-dichloroalkanoyl chloride)s were also among the chlorination products. The spectroscopic data as well as the physical properties of these new fluorination products, and perfluoro(2,5,5-trichloro-2-alkyloxolane)s and perfluoro(5,5-dichloroalkanoyl chloride)s are presented.     

Synthesis of poly (ethylene oxide)-b-polysilane by anionic polymerization of masked disilenes using a macroinitiator method

Poly(ethylene oxide-)-poly(1, 1-dimethyl-2, 2-dihexyldisilene) block copolymers (PEO-b-PMHS) were synthesized by the anionic polymerization of masked disilenes initiated with the potassium alkoxide of poly(ethylene glycol). The block copolymer self-assembled into polymer micelles in water accompanied by a transition in the polysilane conformation.     

Simple preparation and catalytic activity of Pd particles dispersed mesoporous carbons from poly(VDC/MA) containing Pd and Y compounds

We report a simple preparation of Pd particles dispersed mesoporous carbons. The carbons were prepared by steam activation of carbonized vinylidene chloride/methyl acrylate copolymer (poly(VDC/MA)) containing yttrium acetylacetonate (Y(acac)(3)) and palladium acetylacetonate (Pd(acac)(2)). The resulting carbons consist of high contents of mesopore and uniformly dispersed fine Pd particles. We measured the catalytic activities of the carbons obtained for hydrogenation of methyl linoleate. The Pd particles dispersed in mesoporous activated carbons obtained from poly(VDC/MA) containing both Y(acac)(3) and Pd(acac)(2) showed high catalytic activities, compared with the microporous activated carbon obtained from poly(VDC/MA) containing only Pd(acac)(2). Especially Pd particles dispersed in mesoporous carbons exhibited excellent selectivity for hydrogenation of diene (methyl linoleate) to monoene (methyl oleate).     

Sub-Doppler rotationally resolved spectroscopy of lower vibronic bands of benzene with Zeeman effects

Sub-Doppler high-resolution excitation spectra and the Zeeman effects of the 6(0)(1), 1(0)(1)6(0)(1), and 1(0)(2)6(0)(1) bands of the S1(1)B2u<--S(0)(1)A1g transition of benzene were measured by crossing laser beam perpendicular to a collimated molecular beam. 1593 rotational lines of the 1(0) (1)6(0) (1) band and 928 lines of the 1(0)(2)6(0)(1) band were assigned, and the molecular constants of the excited states were determined. Energy shifts were observed for the S1(1)B2u(v1=1,v6=1,J,Kl=-11) levels, and those were identified as originating from a perpendicular Coriolis interaction. Many energy shifts were observed for the S1(1)B2u(v1=2,v6=1,J,Kl) levels. The Zeeman splitting of a given J level was observed to increase with K and reach the maximum at K=J, which demonstrates that the magnetic moment lies perpendicular to the molecular plane. The Zeeman splittings of the K=J levels were observed to increase linearly with J. From the analysis, the magnetic moment is shown to be originating mostly from mixing of the S1(1)B2u and S2(1)B1u states by the J-L coupling (electronic Coriolis interaction). The number of perturbations was observed to increase as the excess energy increases, and all the perturbing levels were found to be a singlet state from the Zeeman spectra.     

Catalytic transformation of methane over in-loaded ZSM-5 zeolite in the presence of ethene

Methane is shown to react with ethene over In-loaded ZSM-5 to higher hydrocarbons such as propene and toluene at around 673 K. Such methane conversion is not catalyzed by proton-exchanged ZSM-5 (H-ZSM-5) under the same conditions, only C2H4 being converted to higher hydrocarbons. By using 13C-labeled methane (13CH4) as a reactant, the reaction paths for the formation of propene, benzene and toluene were examined. 13C-labeled propene (13CC2H6) is formed by the reaction of 13CH4 with C2H4. The lack of 13C-labeled benzene revealed that propene is not transformed to benzene, which instead originates entirely from C2H4. The 13C atom is inserted both into the methyl group and benzene ring in the toluene formed. This indicates that toluene is formed by two reaction paths; the reaction of 13CC2H6 with butenes formed by the dimerization of C2H4 and the reaction of benzene with 13CH4. The existence of the latter path was proved by the direct reaction of 13CH4 with benzene. The reaction of methane with benzene was also carried out in a continuous flow system over In-loaded ZSM-5. The reaction afforded 7.6% and 0.9% yields of toluene and xylenes, respectively, at 623 K.     

Determination of plutonium by solvent extraction—Liquid scintillation method

A combined solvent extraction—liquid scintillation method is suggested for the determination of plutonium. The quenching by twenty four extracting reagents was examined systematically, and the organo phosphorus extractants such as tributylphosphate (TBP), bis-(2-ethyhexyl) phosphoric acid (HDEHP), and tri-n-octylphosphineoxide (TOPO) were shown to be least quenching compared with amines and beta-diketones. Using TOPO, plutonium from 1 ng to 2 μg was determined within 5% of standard deviation, and the detection limit was 3·10⁻¹⁰ g of²³⁹Pu. The quenching by the different ions and the effects of the radioactive elements were also shown.     

Fast separation of oligonucleotide and triplet repeat DNA on a microfabricated capillary electrophoresis device and capillary electrophoresis

A laser-induced fluorescence detection system coupled with a highly sensitive silicon-intensified target (SIT) camera is successfully applied to the imaging of a band for DNA fragment labeling by fluorescence dye in a microchannel, and to the visualizing of the separation process on a microfabricated chip. We demonstrated that an only 6 mm separation channel is sufficient for the separation of triplet repeat DNA fragment and DNA molecular marker within only 12 s. The separation using the microfabricated capillary electrophoresis device is confirmed to be at least 18 times faster than the same separation carried out by conventional capillary electrophoresis with 24.5 cm effective length. The use of a short capillary with 8.5 cm effective length is also efficient for fast separation of DNA; however, the microchip technology is even faster than capillary electrophoresis using a short capillary.     

Dynamics and thermodynamics of dimerization of parallel G-quadruplexed DNA formed from d(TTAGn) (n=3-5)

Parallel G-quadruplexes formed from oligonucleotide sequences, d(TTAGn), where n = 3-5, have been shown to form a dimer through end-to-end stacking of 3'-terminal G-tetrads. The monomers and dimers of the G-quadruplexes are in dynamic equilibrium with an exchange rate of approximately 1 s-1. A thermodynamic study demonstrated that the dimerization of the G-quadruplexes is largely enthalpic in origin.     

Highly sensitive determination of a polymeric hindered amine light stabilizer in polypropylene by reactive thermal desorption-gas chromatography using nitrogen-specific detection

Highly sensitive and specific determination of trace amounts of a polymeric hindered amine light stabilizer (HALS) in polypropylene (PP) materials could be established by improving reactive thermal desorption-gas chromatography (RTD-GC) in the presence of an organic alkali, tetramethylammonium hydroxide. By using nitrogen-phosphorus detection, highly selective detection of the HALS-related components was attained. In addition, the use of a polar poly(ethylene glycol) separation column alleviated the adsorption of minor specific pyrolysis products. This modified RTD-GC method allowed the determination of the polymeric HALS (Mr 1900) in PP even for trace concentrations between 100 and 500 ppm, through observing selectively the characteristic products containing a tetramethylpiperidine moiety, which had been impossible to detect under the previous RTD-GC conditions using a non-polar separation column and conventional flame ionization detection.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.