Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.     

Determination of residual levels of unsaturation in partially hydrogenated poly(2,3-diphenyl-1,3-butadiene) using TG

The thermal degradation characteristics of head-to-head poly(styrene) [HHPS] should provide insight with respect to the impact of head-to-head placement on the thermal stability of traditional atactic head-to-tail polymer [HTPS]. The synthesis of head-to-head poly(styrene) must be accomplished indirectly. The head-to-head polymer is most satisfactorily obtained by dissolving metal reduction of poly(2,3-diphenyl-1,3-butadiene) [PDBD] generated by radical polymerization of the corresponding diene monomer. Full saturation of the polymer mainchain requires several iterations of the reduction procedure. Since the decomposition of poly(2,3-diphenyl-1,3-butadiene) is prominent at 374°C and that for head-to-head poly(styrene) is similarly facile at 406°C, it seemed feasible that TG of partially hydrogenated PDBD might be utilized as a convenient means of monitoring the extent of hydrogenation. This has been demonstrated for various levels of unsaturation remaining - from approximately 90 to less than 10%. Within this range the peak areas from the DTG plots of the partially hydrogenated polymer provide a good reflection of the ratio of unsaturated to saturated units in the polymer. Even low levels of unsaturation in the polymer may be detected by the asymmetry of the decomposition peak for the polymer. This revised version was published online in August 2006 with corrections to the Cover Date.     

Diels-Alder reactions of quinol lactones: a change of regioselectivity with stannic chloride catalysis

Lewis acid-mediated Diels-Alder reactions of quinol lactone 2 gave regioselectivity opposite to that of the uncatalyzed reaction. Compound 12 is proposed as the reactive intermediate generated by the reaction of 2 with stannic chloride.     

Correlation and response functions with non-Markovian dissipation: a reduced Liouville-space theory

Based on a recently developed quantum dissipation formulation [R. X. Xu and Y. J. Yan, J. Chem. Phys. 116, 9196 (2002)], we present a reduced Liouville-space approach to evaluate the response and correlation functions of dissipative systems. The weak system-bath interaction is treated properly for its effects on the initial state, the evolution, and the correlation between coherent driving and non-Markovian dissipation. Numerical demonstration shows this correlated effect cannot be neglected even in the calculation of linear response quantities that do not explicitly depend on external fields. Highlighted in this paper is also the proper choice of theory among various formulations in the weak system-bath interaction regime.     

Interaction of the important species HNO and HFSO2 in the atmosphere: Theoretical study of the N?H and S?H blue‐shifted hydrogen bonds

Ab initio molecular orbital and density functional theory (DFT) in conjunction with different basis sets calculations were performed to study the N? H…O and S? H…O blue‐shifted H‐bonds in the HNO…HFSO₂ complex. The geometric structures, vibrational frequencies, and interaction energies were calculated by both standard and CP‐corrected methods. Natural bond orbital (NBO) analysis was used to investigate the origin of blue‐shifted H‐bonds, showing that the decrease in the σ*(N? H) and σ*(S? H) is due to the electron density redistribution effect. The structure reorganization effect on the blue‐shifted hydrogen bonds was discussed in detail. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

A highly enantioselective hetero-Diels-Alder reaction of aldehydes with Danishefsky's diene catalyzed by chiral titanium(IV) 5,5',6,6',7,7',8,8'-octahydro-1,1'-bi-2-naphthol complexes

The catalytic effect of chiral Lewis acids on the hetero-Diels-Alder reaction between aldehydes and Danishefsky's diene (1) has been investigated. A variety of combinations of different ligands and Lewis acids have been examined as catalysts for the hetero-Diels-Alder reaction between benzaldehyde and 1, and it has been found that the readily accessible Ti(IV)-H(8)-BINOL (TiHBOL) complex is a very effective catalyst for the reaction, leading to products with very high enantioselectivity (up to 99% ee) and yield (92%). The hetero-Diels-Alder reaction of other aldehydes with 1 under the catalysis of TiHBOL is a general reaction which proceeds well with very high enantioselectivity and isolated yield for various aldehydes at 0 degrees C to room temperature. Based on the experimental results, the proposed mechanism of the hetero-Diels-Alder reaction and the dihedral angle effects of ligands are discussed.     

Importance of van der Waals Interactions in QM/MM Simulations

The importance of accurately treating van der Waals interactions between the quantum mechanical (QM) and molecular mechanical (MM) atoms in hybrid QM/MM simulations has been investigated systematically. First, a set of van der Waals (vdW) parameters was optimized for an approximate density functional method, the self-consistent charge-tight binding density functional (SCC-DFTB) approach, based on small hydrogen-bonding clusters. The sensitivity of condensed phase observables to the SCC-DFTB vdW parameters was then quantitatively investigated by SCC-DFTB/MM simulations of several model systems using the optimized set and two sets of extreme vdW parameters selected from the CHARMM22 forcefield. The model systems include a model FAD molecule in solution and a solvated enediolate, and the properties studied include the radial distribution functions of water molecules around the solute (model FAD and enediolate), the reduction potential of the model FAD and the potential of mean force for an intramolecular proton transfer in the enediolate. Although there are noticeable differences between parameter sets for gas-phase clusters and solvent structures around the solute, thermodynamic quantities in the condensed phase (e.g., reduction potential and potential of mean force) were found to be less sensitive to the numerical values of vdW parameters. The differences between SCC-DFTB/MM results with the three vdW parameter sets for SCC-DFTB atoms were explained in terms of the effects of the parameter set on solvation. The current study has made it clear that efforts in improving the reliability of QM/MM methods for energetical properties in the condensed phase should focus on components other than van der Waals interactions between QM and MM atoms.     

Temperature-sensitive polypeptide brushes-coated mesoporous silica nanoparticles for dual-responsive drug release

A multifunctional nanohybrid based on mesoporous silica nanoparticle and biocompatible polypeptide was fabricated for targeted and dual-responsive therapy of tumor cells.     

ICP-AES determination of trace elements after preconcentrated with p-dimethylaminobenzaldehyde-modified nanometer SiO2 from sample solution

A new method that utilizes p-dimethylaminobenzaldehyde-modified nanometer SiO₂ (SiO₂-p-DMABD) as a solid phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) prior to the measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The preconcentration conditions of analytes were investigated, including the pH value, the shaking time, the mass of sorbent, the sample flow rate and volume, the elution condition and the interfering ions. The adsorption capacity of nanometer SiO₂-p-DMABD was found to be (mg g^− 1) Cr(III): 6.2, Cu(II): 18.6, Fe(III): 4.7 and Pb(II): 6.0 at pH 4. The adsorbed metals were quantitatively eluted with 4 mL of 1.0 mol L^− 1 HCl. According to the definition of IUPAC, the detection limits (3σ) of this method for Cr(III), Cu(II), Fe(III) and Pb(II) were 0.79, 1.27, 0.40 and 1.79 ng mL^− 1, respectively. The proposed method achieved satisfied results when it was applied to the determination of trace Cr(III), Cu(II), Fe(III) and Pb(II) in biological and water samples.     

Synthesis, structure, and fluorescence of the novel cadmium(II)-trimesate coordination polymers with different coordination architectures

Three novel complexes, Cd3tma2*13H2O (1), Cd3tma2*dabco*2H2O (2), and Cd3Htma3*8H2O (3) (tma = trimesate), of cadmium(II)-trimesate coordination polymers are obtained from hydrothermal reaction. 1 (C18H32O25Cd3) crystallizes in the monoclinic C2/c space group [a = 18.985(2) A, b = 7.3872(6) A, c = 20.432(2) A, = 97.1660(10), and Z = 4]. 2 (C24H22N2O14Cd3) crystallizes in the monoclinic P2(1)/c space group [a = 10.1323(2) A, b = 19.5669(5) A, c = 13.15880(10) A, = 108.9810(10), and Z = 4]. 3 (C27H28O26Cd3) belongs to the trigonal P31c space group [a = 15.7547(3) A, b = 15.7547(3) A, c = 7.93160(10) A, and Z = 2]. The Cd(II) centers in the three complexes are bridged by tma ligands in the coordination fashion of unidentate, bridging unidentate, bidentate, chelating bis-bidentate, chelating/bridging bis-bidentate, or chelating/bridging bidentate to form the T-shaped molecular bilayer motif for 1, chicken-wire-like motif for 2, and honeycomb-like porous structure for 3, respectively, in which the T-shaped molecular bilayer motif and chicken-wire-like motif are further interlinked in interdigitating or alternating fashion to construct the different coordination architectures. These three complexes exhibit strong fluorescent emission bands at 355 nm (lambda(ex) = 220 nm) for 1, 437 nm (lambda(ex) = 365 nm) for 2, and 353 nm (lambda(ex) = 218 nm) for 3 in the solid state at room temperature.