卡尔曼滤波析相光度法同时测定锰铁铜锌镉的研究——5-Br-PADAP—Triton X-100体系

运用卡尔曼滤波递推法,以2-(5-溴-2-吡啶偶氮)—5-二乙氨基苯酚(5-Br-PADAP)为显色剂,建立了同时测定锰、铁、铜、锌、镉析相光度法.在pH9.0硼酸-氢氧化钠介质中,胶束溶液在95℃加热1h,配合物被Triton X-100相完全富集,最大吸收峰分别为锰566nm、铁556nm、铜560nm、锌562nm、镉557nm,工作曲线范围除镉为0～8μg/5ml外,其余均为0～10μg/5ml.应用于大米中锰铁铜锌镉的同时测定,结果满意.     

Measurement of the half life of126Sn using a radiochemical method

The half-life of¹²⁶Sn has never been measured accurately. The value quoted in the literature is approximately 10⁵y, which was measured in 1958. In the present work we measured accruately the half life of¹²⁶Sn to be (2.5±0.2)×10⁵y using a radiochemical method.     

A facile synthesis of bifunctional phospholipids for biomimetic membrane engineering

We report a facile synthesis of bifunctional phospholipid conjugates by acylation of N-protected lyso-phosphatidylethanolamine with 12-acryloxy-1-dodecanoic acid and followed with deprotection and conjugation with biotin, FITC, Texas Red, or EMC groups. The lipid conjugates can be used to generate a multifunctional substrate-supported phospholipid membrane via bioconjugation reaction to biotin or covalent attachment to EMC at their hydrophilic terminus. In addition, conjugation to fluorophores, FITC or Texas Red, provides a convenient mechanism to monitor lipid membrane formation and stability. Significantly, in situ photopolymerization of the acrylate group at the end of one of two hydrophobic alkyl chains stabilizes the phospholipid membrane.     

Electronic effects steer the mechanism of asymmetric hydrogenations of unfunctionalized aryl-substituted alkenes

Density functional theory (PBE and B3LYP) was used to study asymmetric hydrogenations of alkenes catalyzed by an iridium imidazolylidine oxazoline complex. The calculation predicts that the alkene preferentially coordinates to the site trans to the carbene. The coordinated alkene then reacts first with the H2 ligand, then with the hydride to form alkane. Finally, the alkane is released by equilibrating with extrinsic H2 and alkene. Enantioface selectivities for hydrogenations of trisubstituted alkenes seem to be driven primarily by steric interactions with the adamantyl part of the ligand; only the smallest substituents can adopt a site close to it. Application of this theoretical model leads to correct predictions regarding the experimentally observed sense and magnitude of the enantioselectivities.     

Iridium-mediated asymmetric hydrogenation of 2,3-diphenylbutadiene: a revealing kinetic study

Hydrogenation of 2,3-diphenylbutadiene mediated by a chiral iridium carbene oxazoline complex was studied. The kinetics of the reaction showed that it occurred in two distinct stages. The first corresponded to slow consumption of the diene to form half-hydrogenated products, i.e., monoenes. After all the diene was consumed, however, the reaction was much faster and more stereoselective. These data were interpreted in terms of possible catalytic intermediates.     

Mechanistic evaluation of the halocyclization of 4-penten-1-ol by some Bis(2-substituted pyridine) and Bis(2,6-disubstituted pyridine)bromonium triflates

The halocyclization reaction of 4-penten-1-ol mediated by various bis(2-substituted pyridine) and (2,6- disubstituted pyridine)bromonium triflates (P(2)Br(+)OTf(-)) was investigated to determine the influence of the substituents on the mechanism of reaction. In all cases, the reaction proceeds via a two-step process where the starting P(2)Br(+) reversibly dissociates to a reactive monosubstituted PBr(+), which then is captured by 4-penten-1-ol to form halocyclized product (2-bromomethyltetrahydrofuran). The dissociation rate constant of P(2)Br(+) (k(d)) is sensitive to the steric bulk at the 2- and 6-positions, and in the case of the 2, 6-dicyclohexylpyridine or 2,6-dicyclopentylpyridine, the P(2)Br(+) species are too unstable to isolate. The partitioning ratio of the reactive intermediate (PBr(+)) between reversal and product formation (k(-)(d)/k(2)) is not particularly sensitive to the nature of the pyridine, the limiting values being 3-7 except in the case of bis(2(-)-menthylpyridine)bromonium triflate where the k(-)(d)/k(2) ratio is approximately 80. The reaction of 4-penten-1-ol and its OD isotopomer with bis(lutidine)bromonium triflate was investigated to determine the deuterium kinetic isotope effect (dkie) on the bromocyclization reaction. The (k(-)(d)/k(2))(H/D) ratio is 1.0, indicating that the rate-limiting step for the bromocyclization is probably formation of a PBr(+)-4-penten-1-ol complex which does not involve substantial changes in the bonding of the OH. The cyclization of 4-penten-1-ol and 4-pentenoic acid mediated by bis(2(-)-menthylpyridine)bromonium triflate produces an enantiomeric excess in the cyclized products of only 2.4% and 4.8% respectively.     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

Ring-opening Polymerization of e-Caprolactone Using Lanthanide Tris(4-tert-butylphenolate)s as a Single-component Initiator

The ring-opening polymerization of e-caprolactone (CL) initiated by novel single lanthanide tris(4-tert-butylphenolate)s [Ln(OTBP)3] is reported. Single-component La(OTBP)3 can effectively prepare polycaprolactone (PCL) with over 90% yield and viscosity average molecular weight about 60 x 10 under quite mild conditions: molar ratio of CL to initiator is 1000, 60 C, 2 h in toluene. Mechanism study indicates that the monomer inserts into the growing chain via the break of acyl-oxygen bond of CL.     

六氰合铁酸铜钴在蜡浸石墨电极表面的电化学沉积

首次报道了电化学沉积的混合金属六氰合铁酸盐修饰电极作为电流型传感器的研究。针对六氰合铁酸盐修饰电极在中性和碱性条件下的不稳定性，采用混合金属电沉积的方法，成功地提高了电极的稳定性，所得到的修饰电极在 ｐＨ ４～１０之间均表现出良好的稳定性。该电极的响应时间（ｔ９５％）为 ０．５ｓ，并对Ｆｅ３＋／Ｆｅ２＋电对表现出良好的电催化作用。催化氧化峰电流与Ｆｅ２＋的浓度在１．０×１０－４～６．５×１０－２ｍｏｌ/Ｌ范围内呈很好的线性关系，检测下限为 １．４×１０－６ｍｏｌ／Ｌ。