激光水下偏振特性用于目标图像探测

利用激光水下偏振特性获得偏振差分图像(PDI),并运用PDI技术,从理论和实验上对水下目标探测进行了研究.介绍了PDI基本概念和实验系统原理,然后比较分析了不同条件下普通图像与PDI在辨别目标距离及其纹理上的差别和PDI中背景偏振光的影响,得出利用目标和背景偏振光的差异区分二者,从而提高探测距离的结论,并取得了较好的效果.在此基础上提出了通过处理有关PDI偏振参量来进一步辨别目标与背景的设想.     

Epoxy resin containing polyphenylsilsesquioxane: Preparation,morphology, and thermomechanical properties

Polyphenylsilsesquioxane (PPSQ) was incorporated into an epoxy resin to prepare organic–inorganic composites, and two strategies were adopted to afford composites with different morphologies. Phase separation induced by polymerization occurred in the physical blending system. However, nanostructured composites were obtained when a catalytic amount of aluminum triacetylacetonate was added to mediate the reaction between PPSQ and diglycidyl ether of bisphenol A (DGEBA). The intercomponent reaction significantly suppressed the phase separation on the micrometer scale. Organic–inorganic composites with different morphologies displayed quite different thermomechanical properties. Both differential scanning calorimetry and dynamic mechanical analysis showed that the nanostructured composites possessed higher glass‐transition temperatures than the phase‐separated composites with the same loading of PPSQ, although the intercomponent reaction between PPSQ and DGEBA reduced the crosslinking density of the epoxy matrix. This result was ascribed to the presence of nanosized PPSQ domains in the nanostructured composites, which acted as physical crosslinking sites and thus reinforced the epoxy networks. The nanoreinforcement of the PPSQ domains afforded the enhanced dynamic storage modulus for the nanostructured composites in comparison with the phase‐separated composites with a PPSQ concentration less than 15 wt %. In terms of thermogravimetric analysis, the organic–inorganic composites displayed improved thermal stability and flame retardancy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1093–1105, 2006     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

多功能沸点仪的研究

本文提出了两种新型沸点仪——CP-Ⅰ型和CP-Ⅱ型沸点仪, 阐述了仪器各部分结构的设计思想和原理, 并对仪器的性能和各部分功能进行了较为完整的实验考核, 获得了预期的效果。     

希土氯化物与α－羟基异丁酸配合物的合成、表征、晶体结构及抑菌效应的研究

合成了十五种希土氯化物与α－羟基异丁酸配合物。对配合物的物化性质进行了表征，测定了Ｌａ（ＨＩＢ）２．Ｃｌ．２Ｈ２Ｏ的晶体结构，配合物属单斜晶系，Ｃ２／Ｃ空间群，晶胞参数：ａ＝９．００７（５）；ｂ＝８．７００（３）；ｃ＝１９．７７０（５）ａ；β＝９６μο（３）°；Ｚ＝４。合成的十五种配合物均具有较强的抑菌能力。     

奋乃静和氟奋乃静的毛细管电泳柱端喷壁式安培检测

应用自组装毛细管电泳．安培检测装置，建立了同时分离检测抗精神病药奋乃静与氟奋乃静的新方法。在1050mV(vs．Ag／AgCl)检测电位下，奋乃静与氟奋乃静的检出限分别达0．060mg／L与0．075mg／L。在最佳检测条件下，两组分的响应电流与浓度之间有着良好的线性关系，线性范围为0．75～75mg／L。将方法用于药物片剂以及模拟尿样和血清样品中奋乃静和氟奋乃静的测定，结果令人满意。     

Collaborative monitoring study of airborne particulate matters among seven Asian countries

Summary Seven Asian countries have been collaborating in collecting airborne particulate matter (APM) in their individual countries and analyzing them by neutron activation analysis as a common analytical tool. APM samples were collected into two fractions of fine and coarse grains (PM2 and PM2-10, respectively). Analytical data were compared from several viewpoints such as particulate sizes, locality of sampling sites (either urban or rural) and geographical location of participating countries. Chemical composition and their monthly variations as well as mass concentrations appear to be highly characteristic for individual sampling sites, suggesting that NAA data are suitable for evaluating the air quality in each site.     

Metrological role of neutron activation analysis. IB. Inherent characteristics of relative INAA as a primary ratio method of measurement

This is the second part of a paper which deals with the advantages and disadvantages of relative instrumental neutron activation analysis concerning traceability and uncertainty, and the current scope and possible future extensions of neutron activation analysis as a primary ratio method. The first part of this paper has been published in this Journal [1]. Received: 19 March 2001 Accepted: 2 October 2001