Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

Determination of phenols in soil by supercritical fluid extraction-capillary electrochromatography

A new analytical procedure is developed to couple supercritical fluid extraction with capillary electrochromatography (SFE-CEC) to extract and determine phenols in soil. Ten phenols consisting of phenol, methylphenols (p-cresol and o-cresol), dimethylphenols (3,5-xylenol, 3,4-xylenol and 2,6-xylenol), trimethylphenol, ethylphenols (p-ethylphenol and o-ethylphenol), and o-isopropylphenol are investigated. The use of supercritical CO2 with 10% methanol as the organic modifier was found to give satisfactory extraction of alkylphenols from soil at 1200 p.s.i. and 50 degrees C for 45 min under a total extractant flow-rate of 0.2 ml/min (1 p.s.i.=6894.76 Pa). Baseline resolution was achieved for the 10 selected phenols under optimised CEC conditions at 20 kV in a mobile phase of acetonitrile-4 mM Tris, pH 7.0 (35:65) in a 45 cm (25 cm packed with 3 microm ODS) x 75 microm I.D. fused-silica capillary column. Using SFE with a 10-fold preconcentration factor, all alkyl-substituted phenols in soil can be determined with detection limits ranging from 0.0032 to 0.014 mg/kg and working range from 0.019 to 2.72 mg/kg. The SFE-CEC procedure developed has been applied successfully to determine phenols extracted from real soil sample contaminated with medical disinfectant. It will provide a rapid method for the direct determination of phenol and alkyl-substituted phenol in soils, with capability for confirmation of unknown peaks.     

Molecular design of free volume as a route to low-kappa dielectric materials

Polymers incorporating the triptycene subunit were prepared for the molecular-level design of low dielectric constant (low-kappa) materials that can be used to manufacture faster integrated circuits. Triptycenes having restricted rotation by multiple point attachment to the polymer backbone are shown to introduce free volume into the films, thereby lowering their dielectric constants. The triptycene containing polymers exhibit a number of desirable properties including low-water absorption and high thermal stability. Systematic studies wherein comparisons are made between two separate classes of triptycene polymers and their non-triptycene containing analogues demonstrate that proper insertion of triptycenes into a polymer backbone can give rise to a reduction in the material's dielectric constant while also improving its mechanical properties. These characteristics are desired by the semiconductor industry for the next generation of microprocessors and memory to provide insulation of the increasingly shrinking features.     

Preparation of a Star Network PEG-based Gel Polymer Electrolyte and Its Application to Electrochromic Devices

A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the character being colorless and highly transparent has been also prepared. The polymer host was characterized and confirmed to be of a star network and an amorphous structure by FTIR, ^1H NMR and XRD studies. The polymer host hold good mechanical properties for pentaerythritol cross-linking. Maximum ionic conductivity of the prepared polymer electrolyte has reached 8.83 × 10 ^-4 S·cm^-1 at room temperature. Thermogravimetry （TG） of the polymer electrolyte showed that the thermal stability was up to at least 150 ℃. The gel polymer electrolyte was further evaluated in electrochromic devices fabricated by transparent PET-ITO and electrochromically active viologen derivative films, and its excellent performance promised the usage of the gel polymer electrolyte as ionic conductor material in electrochrornic devices.     

超高效液相色谱-串联质谱法测定茶叶中游离氨基酸成分

建立了使用超高效液相色谱-串联质谱（UHPLC-MS/MS）高效、快速直接测定茶叶中游离氨基酸的方法。通过对质谱、色谱条件及氨基酸提取条件的优化，以含0.2%（体积分数）甲酸的5 mmol/L乙酸铵水溶液和甲醇为流动相进行梯度洗脱，在电喷雾离子（ESI）源正离子扫描模式下检测，通过UHPLC-MS/MS测定，共解析了茶叶中的20种氨基酸。结果表明，茶氨酸（Thea）、Arg、Asn和Asp在50~500 μg/L范围内线性关系良好，其他氨基酸在10~250 μg/L范围内线性关系良好，相关系数均大于0.99；加标回收率为92.3%~109.2%，相对标准偏差为2.00%~9.88%，检出限为0.001~0.011 mg/L，定量限为0.010~0.053 mg/L。该方法灵敏、准确，具有良好的重复性和稳定性，可有效检测出茶叶中的20种氨基酸及氨基类成分。     

Electrochemical insertion of magnesium ions into V2O5 from aprotic electrolytes with varied water content

The electrochemical performance of V2O5 has been studied in propylene carbonate (PC)-containing magnesium perchlorate [Mg(ClO4)2] electrolytes in view of their application as positive electrode in the rechargeable magnesium batteries. V2O5 exhibited good properties in hosting magnesium ions and its electrochemical performance depended on the amount of H2O in the electrolytes. The highest first discharge specific capacities of V2O5 electrode was up to 158.6 mAh/g in 1 mol dm(-3) Mg(ClO4)2 + 1.79 mol dm(-3) H2O/PC electrolytes. Electrochemical impedance spectroscopy (EIS) and charging-discharging tests showed that a reasonable amount of H2O in the electrolyte solution facilitated the electrochemical performance of V2O5 electrodes.     

Probing water interactions and vacancy production on gadolinia-doped ceria surfaces using electron stimulated desorption

Polycrystalline gadolinia-doped ceria (GDC) surfaces were studied using low-energy (5-400 eV) electron stimulated desorption (ESD). H(+), O(+), and H(3)O(+) were the primary cationic desorption products with H(+) as the dominant channel. H(+), H(3)O(+), and O(+) have a 22 eV threshold followed by a yield change around 40 eV. H(+) also has an additional yield change approximately 75 eV and O(+) has an additional change approximately 150 eV. The O(+) ESD yield change approximately 150 eV may indicate bond breaking of Gd-O and the involvement of oxygen vacancies. The H(+) and H(3)O(+) threshold data collectively indicate the presence of hydroxyl groups and chemisorbed water molecules on the GDC surfaces. ESD temperature dependence measurements show that the interaction of water with GDC surface defect sites, mainly oxygen vacancies, influences the desorption of H(+), O(+), and H(3)O(+). The temperature dependence of the O(+) ESD at 400 eV incident electron energy yields a 0.21 eV activation energy. This is close to the energy needed for oxygen vacancy production next to a pair of Ce(3+) on a CeO(2) surface. These results may indicate a correlation between the O(+) ESD yield and oxygen vacancy density on GDC surfaces and a potential correlation of O(+) ESD and GDC ionic conductivity.     

Elucidating dominant factors of PO43-, Cd2+ and nitrobenzene removal by biochar: A comparative investigation based on distinguishable biochars

Four distinct biochars were employed to remove three typical pollutants, meanwhile, path analysis, a multi-statistical regression method, was performed to elucidate the dominant factors of biochar adsorption. This work can provide a new insight to prepare a targeted biochar as adsorbents.     

缝管原子捕集原子吸收光谱法测定维生素B12

本文研究了Ａｌ２Ｏ２涂层的开缝石英管原子捕集法测定ＣＯ的条件并通过测ＣＯ间接测定维生素Ｂ（１２）。结果表明，在优化条件下Ｃｏ的特征浓度为８×１０（－３）μｇ·ｍＬ（－１），比常规火焰原子吸收法的灵敏度提高８倍。采用本法测定腺苷辅酶维生素Ｂ（１２）中ＶＢ（１２）的含量，相对标准偏差１．１％，加标回收率９８．２～１００．４％。     

Mammalian cell growth studiedin situ by fourier transform infrared spectroscopy

Fourier transform infrared techniques were used to monitor mammalian cell growth plated on attenuated total reflection (ATR) crystals. Consistently, the growth kinetics plots generated from the obtained spectra demonstrated a sigmoidal curve representing a sequence of slow, rapid, then tapering cell growth which correlated well with non-spectral cell growth determinations. Significant advantages over traditional methods of measuring cell growth kinetics are demonstrated. The technique has promising potential to be used to study events in areas such as toxicology and cell biology.