Effect of amphiphilic molecules upon chromatic transitions of polydiacetylene vesicles in aqueous solutions

Effect of amphiphilic molecules upon the chromatic transitions of polymerized 10,12-pentacosadiynoic acid (PCDA) vesicles in aqueous solutions was reported. The colorimetric response of polymerized PCDA vesicles for 1-pentanol is higher than that for ethanol due to more hydrophobic property of 1-pentanol. The colorimetric response of polymerized PCDA vesicles for sodium dodecyl sulfate (SDS) and Triton X-100 is lower than that for cetyltrimethylammonium bromide (CTAB). The strong ability of CTAB to induce chromatic transition of the vesicles is related to the positively charged headgroups of CTAB, which favors approach of CTAB to the negatively charged carboxylate groups at the vesicle surface. The insertion of alkyl chain of CTAB into the hydrophobic domain perturbs the conformation of the conjugated polymer backbone and induces color change of polydiacetylene vesicles. For a series of alkylamine hydrochloric salts, the longer the alkyl chain, the stronger the ability of alkylamine to induce chromatic transition of polydiacetylene vesicles.     

Synthesis of C60-diphenylaminofluorene dyad with large 2PA cross-sections and efficient intramolecular two-photon energy transfer

The first, highly two-photon active C60 derivative comprised of a A-sp3-D conjugate structure was synthesized showing effective two-photon absorption cross-sections (sigma 2' = 196 x 10(-48) cm4 sec-1 molecule-1) in the nanosecond regime among the best values for diphenylaminofluorene-based AFX chromophores.     

Structural integration of tellurium oxide into mixed-network-former glasses: connectivity distribution in the system NaPO(3)-TeO(2).

Sodium phosphate tellurite glasses in the system (NaPO(3))(x)(TeO(2))(1-) (x) were prepared and structurally characterized by thermal analysis, vibrational spectroscopy, X-ray photoelectron spectroscopy (XPS) and a variety of complementary solid-state nuclear magnetic resonance (NMR) techniques. Unlike the situation in other mixed-network-former glasses, the interaction between the two network formers tellurium oxide and phosphorus oxide produces no new structural units, and no sharing of the network modifier Na(2)O takes place. The glass structure can be regarded as a network of interlinked metaphosphate-type P(2) tetrahedral and TeO(4/2) antiprismatic units. The combined interpretation of the O 1s XPS data and the (31)P solid-state NMR spectra presents clear quantitative evidence for a nonstatistical connectivity distribution. Rather, the formation of homoatomic P--O--P and Te--O--Te linkages is favored over mixed P--O--Te connectivities. As a consequence of this chemical segregation effect, the spatial sodium distribution is not random, as also indicated by a detailed analysis of (31)P/(23)Na rotational echo double-resonance (REDOR) experiments.     

室温以上磁制冷材料La(Fe1-xCox)11.7Al1.3化合物的研究

通过X射线衍射分析和超导量子干涉磁强计（SQUID）磁性测量,研究了Co替代Fe含量对居里温度在室温以上的磁制冷材料La（Fe1-xCox）11.7Al1.3（x=0.072,0.081）磁结构和磁性能的影响。La（Fe1-xCox）11.7Al1.3材料的居里温度随Co的含量增加而增加,La（Fe0.919Co0.081）11.7Al1.3的居里温度为311 K。当外场变化为1.9 T时磁熵变达到3.6 J·kg^-1·K^-1,RCP值为168.6 J·kg^-1,虽然它的磁熵变小于具有巨磁熵变的磁制冷材料,但是它在磁场为1.9 T时的制冷能力与这些材料相当。     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Construction and analytical application of ion-selective piezoelectric sensor for atropine sulfate

The method describes the use of a piezoelectric quartz crystal (PQC) as a substitute for ion-selective electrodes. The approach is feasible when the membrane materials are electrically non-conductive and membrane potential measurements are consequently not possible. An ion-selective piezoelectric sensor sensitive to atropine sulfate was constructed by coating a PVC membrane containing activant on one the side of a PQC. On the basis of selective adsorption of atropine ions across the modified film and the sensitive mass response of PQC, the method exhibits a sensitive, rapid response and is easy to operate without pretreatment of the sample. The logarithm of the frequency shift gave a linear relationship with the logarithm of atropine sulfate concentration in the 1.0 x 10(-8)-1.0 x 10(-3) M range with a detection limit of 5.0 x 10(-9) M at pH 7.0. Recoveries were from 98.7-102.2%. Two activants, atropine tetraphenylborate and atropine dipicrylaminate, were synthesized and investigated. Influencing factors were also examined and optimized. The results for real samples obtained by the proposed method agreed with those obtained by conventional methods.     

Selective oxidation of isobutane over Mo-V-Te mixed oxide catalysts with different tellurium contents

A series of MoV_0.3Te_x (x = 0−0.3) mixed oxides were prepared and investigated for the selective oxidation of isobutane. Among them, MoV_0.3Te_0.23 showed the best methacrolein and methacrylic acid selectivity (as high as 17% and 16%, respectively), and the yield to methacrolein and methacrylic acid reached 3.6% and 3.5%, respectively, at 21.3% isobutane conversion at 440°C.     

Preparation of isoprostanes and neuroprostanes

A new approach to isoprostanes and neuroprostanes featuring cis-dialkyl stereochemistry at the cyclopentane ring has been developed by employing an intramolecular cross-coupling reaction of an alkyl iodide and a tethered alkenylsiloxane for stereoselective installation of a functionalized omega-side chain.     

Metal-betaine interactions—X. Preparation and crystal structures of bis(triethyl betaine)bis(nitrato)disilver(I) and catena-bis(triethyl betaine)disilver(I) diperchlorate

Two silver(I) complexes of triethyl betaine (Et₃N⁺CH₂COO⁻, Et₃BET) have been prepared and characterized by X-ray crystallography. Both complexes, [Ag₂(Et₃BET)₂ (NO₃)₂] (1) and [Ag₂(Et₃BET)₂]_n (ClO₄)_2n (2), contain centrosymmetric bis-carboxylato-bridged Ag₂(carboxylato-O,O′)₂ dimers (Ag---O = 2.16–2.23 Å). The dimeric unit in 1 is bound to a chelating nitrato group [Ag---O = 2.524(3), 2.619(3) Å] at each axial site, resulting in a discrete molecule. In 2 the dimers are extended into a stair-like cationic chain via the coordination of each metal centre by a carboxylato oxygen atom [Ag---O =2.565(5) Å] from an adjacent unit. The intra-dimer Ag… Ag distance is 2.928(1) Å for 1 and 2.856(2) Å for 2.