Monte Carlo simulation of nitriding in iron by a mixing technology with laser and plasma beams

A program is modeled to describe nitriding depth by a new mixing laser and plasma beams nitriding (LPN) technique. The model extends the transport of ions in matter (TRIM) program by adding temperature and energy factors into the energy function. The nitriding depths and nitrogen distribution in substrate were calculated by Monte Carlo program. There is a good agreement between calculation and experiment results at different laser energy intensities, scanning velocities and nitrogen ion energies respectively. Moreover, the nitriding process diagrams by LPN technique are shown from calculation results.     

Theoretical study of photon emission from single quantum dot emitter coupled to surface plasmons

Motivated by the recent pioneering advances on nanoscale plasmonics and also nanophotonics technology based on the surface plasmons (SPs), in this work, we give a master equation model in the Lindblad form and investigate the quantum optical properties of single quantum dot (QD) emitter coupled to the SPs of a metallic nanowire. Our main results demonstrate the QD luminescence results of photon emission show three distinctive regimes depending on the distance between QD and metallic nanowire, which elucidates a crossover passing from being metallic dissipative for much smaller emitter-nanowire distances to surface plasmon (SP) emission for larger separations at the vicinity of plasmonic metallic nanowire. Besides, our results also indicate that, for both the resonant case and the detuning case, through measuring QD emitter luminescence spectra and second-order correlation functions, the information about the QD emitter coupling to the SPs of the dissipative metallic nanowire can be extracted. This theoretical study will serve as an introduction to understanding the nanoplasmonic imaging spectroscopy and pave a new way to realize the quantum information devices.     

Effect of stearic acid, zinc stearate coating on the properties of synthetic hydromagnesite

Synthetic hydromagnesite (SHM), used as flame retardant for polymers, may have similar or better flame retardancy effectiveness than aluminum tri-hydroxide (ATH) and magnesium di-hydroxide (MDH). Suitable surface modifiers are often employed to improve its dispersion and compatibility with polymer matrix. In this study, we chose stearic acid (SA) and zinc stearate (ZS) as the surface modifier, and investigated the properties of SHM modified with various surface modifier content using dry blending coating process. Scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry (TG), particle size distribution, contact angle, oil absorption, bulk density, tapped density and Carr's index were employed to characterize the effect of surface modification. The results showed that the surface of SHM powders was changed from hydrophilic to lipophilic. The flowability of the surface modified powder was also improved. TG graphs showed that the surface modifier had no obvious influence on the degradation pathway of the SHM.     

Nanosecond laser ablation and deposition of silicon

Nanosecond-pulsed KrF (248 nm, 25 ns) and Nd:YAG (1064 nm, 532 nm, 355 nm, 5 ns) lasers were used to ablate a polycrystalline Si target in a background pressure of <10⁻⁴ Pa. Si films were deposited on Si and GaAs substrates at room temperature. The surface morphology of the films was characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Round droplets from 20 nm to 5 μm were detected on the deposited films. Raman Spectroscopy indicated that the micron-sized droplets were crystalline and the films were amorphous. The dependence of the properties of the films on laser wavelengths and fluence is discussed.     

某光电雷达稳定平台关键部件转板的动态特性分析

 转板是光电雷达稳定平台的关键元件之一。为了更好地设计和分析某光电雷达稳定平台的转板,运用Pro E软件对其进行三维实体建模,合理简化后,进入Ansys软件界面建立有限元模型。应用有限元理论和Ansys软件对其进行动态特性分析,得到了转板前八阶模态的固有频率和振型,以及要求范围内的谐响应。对比了不同方法划分网格的网格质量,采取不同材料得到了不同模态。分析结果表明：设计的转板在关心的频段0~50 Hz,2 000 Hz~8 000 Hz内不发生共振,符合设计要求。     

Accumulation effect of SiO_2 protective layer on multi-shot laser-induced damage in high-reflectivity HfO_2/SiO_2 coatings

The accumulation effects in high-reflectivity(HR) HfO2/SiO2 coatings under laser irradiation are investigated.The HR HfO2/SiO2 coatings are prepared by electron beam evaporation at 1 064 nm.The laser-induced damage threshold(LIDT) are measured at 1 064 nm and at a pulse duration of 12 ns,in 1-on-1 and S-on-1 modes.Multi-shot LIDT is lower than single-shot LIDT.The laser-induced and native defects play an important role in the multi-shot mode.A correlative theory model based on critical conduction band electron density is constructed to elucidate the experimental phenomena.     

MgO-decorated carbon nanotubes for CO2 adsorption: first principles calculations

The global greenhouse effect makes it urgent to deal with the increasing greenhouse gases.In this paper the performance of MgO-decorated carbon nanotubes for CO 2 adsorption is investigated through first principles calculations.The results show that the MgO-decorated carbon nanotubes can adsorb CO 2 well and are relatively insensitive to O 2 and N 2 at the same time.The binding energy arrives at 1.18 eV for the single-MgO-decorated carbon nanotube adsorbing one CO 2 molecule,while the corresponding values for O 2 and N 2 are 0.55 eV and 0.06 eV,respectively.In addition,multi-molecule adsorption is also proved to be very satisfactory.These results indicate that MgO-decorated carbon nanotubes have great potential applications in industrial and environmental processes.     

钙钛矿CaTiO3的超高压结构研究

利用同步辐射x射线衍射和 DAC 高压技术在室温下测量了钙钛矿CaTiO₃在压力0—44.53 GPa下的结构变化.结果表明，随着压力的增加CaTiO₃的三个晶轴都受到不同程度的压缩，a,b的压缩率相近且相对比较大，c的压缩率最小，但没有证据表明有相变的发生.在压力范围内CaTiO₃的P-V关系用Murnaghan状态方程表示，设定K′0=4，得到V0=0.2245(6)nm3和K0=222(9) GPa.应用赝立方角γpc与压力的关系，初 关键词： 3')" href="#">CaTiO₃ 结构 超高压 状态方程