Cross-flow heat transfer in fixed bed

Radial flow reactor operated at cross-flow heat transfer is focused for large scale methanol synthesis. The effects of operating conditions including the reactor inlet air temperature, the heating pipe temperature and the air flow rate on the cross-flow heat transfer were investigated and results show that the temperature profile of the area in front of the heating pipe is slightly affected by all the operating conditions. The main area whose temperature profile is influenced is located behind the heating pipe. The heat transfer direction is related to the direction of the flow. In order to obtain the basic parameters for radial flow reactor designing calculation, the dimensionless number group method was used for data fitting of the bed effective thermal conductivity and the wall heat transfer coefficient which were calculated by the mathematical model with the product of Reynolds number and Prandtl number. The comparison of experimental data and calculated values shows that the calculated values fit the experimental data satisfactorily and the formulas can be used for reactor designing calculation.     

Structure elucidation of four prenylindole derivatives from Streptomyces sp. isolated from Ailuropoda melanoleuca feces

Four new prenylindole derivatives, (R)‐6‐(2,3‐dihydroxy‐3‐methylbutyl)indole (1), (R)‐6‐(2,3‐dihydroxy‐3‐methylbutyl)indolin‐2‐one (2), and an unseparated mixture of (Z)‐6‐(4‐hydroxy‐3‐methylbut‐2‐en‐1‐yl)indolin‐2‐one (3a) and (E)‐6‐(4‐hydroxy‐3‐methylbut‐2‐en‐1‐yl)indolin‐2‐one (3b) with a ratio of 3 : 2, were isolated from the culture broth of a streptomycete isolated from Ailuropoda melanoleuca feces. Their structures were elucidated on the basis of 1D and 2D NMR spectroscopic techniques. The absolute configuration of 1 was determined by Mosher's method. Copyright © 2013 John Wiley & Sons, Ltd.     

Phosphorus ligands for iron(III)‐mediated ATRP of styrene via generation of activators by monomer addition

Styrene polymerization via generation of activators by monomer addition (GAMA) for atom transfer radical polymerization (ATRP) has been examined extensively with bulk FeX₃ and FeX₂ at 110 °C in conjunction with various phosphorus‐bearing ligands. It was found that GAMA possesses advantages over normal ATRP. Most importantly, narrower polydispersity index (PDI) values were observed from the styrene polymerizations with Fe(III) over those with Fe(II). Every instance of 2‐(diphenylphosphino)‐N,N′‐dimethyl‐[1,1′‐biphenyl]‐2‐amine and 2‐(diphenylphosphino) pyridine with the Fe(III) system were controlled excellently without addition of any radical initiator or reducing agent additives. Initiator type was found to exert a significant factor to influence on the controllability of polymerization. The initiation of 1‐phenylethyl chloride and methyl‐2‐chloropropionate gave rise to formation of polymers with narrow PDI (1.05–1.20), whereas those from 1‐phenylethyl bromide increased to 1.35. The GAMA of bulk styrene exhibited the best performance in terms of both rate and controllability compared with toluene and anisole. Both formation of block copolymer from the macroinitiator and efficient perturbation of polymerization with 2,2,6,6‐tetramethylpiperidine 1‐oxyl provided firm evidence to support the living and radical characteristics for the GAMA of styrene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 144–151, 2010     

DECAY RATE OF SAINT-VENANT END EFFECTS FOR PLANE DEFORMATIONS OF PIEZOELECTRIC-PIEZOMAGNETIC SANDWICH STRUCTURES

This paper is concerned with the decay of Saint-Venant end effects for plane deformations of piezoelectric （PE）-piezomagnetic （PM） sandwich structures, where a PM layer is located between two PE layers with the same material properties or reversely. The end of the sandwich structure is subjected to a set of self-equilibrated magneto-electro-elastic loads. The upper and lower surfaces of the sandwich structure axe mechanically free, electrically open or shorted as well as magnetically open or shorted. Firstly the constitutive equations of PE mate- rials and PM materials for plane strain are given and normalized. Secondly, the simplified state space approach is employed to arrange the constitutive equations into differential equations in a matrix form. Finally, by using the transfer matrix method, the characteristic equations for eigen- values or decay rates axe derived. Based on the obtained characteristic equations, the decay rates for the PE-PM-PE and PM-PE-PM sandwich structures are calculated. The influences of the electromagnetic boundary conditions, material properties of PE layers and volume fraction on the decay rates are discussed in detail.     

New generalization of perturbed Ostrowski type inequalities and applications

Generalizations of perturbed Ostrowski type inequality for functions of Lipschitzian type are established. Applications in numerical integration and cumulative distribution functions are also given.     

Evaluating the Thermal Hazard of Double-Base Propellant SQ-2 by Using Microcalorimetry Method

The thermal decomposition behavior of double‐base rocket propellant SQ‐2 was studied by a Calvet microcalorimeter at four different heating rates. The kinetic and thermodynamic parameters were obtained from the analysis of the heat flow curves. The critical temperature of thermal explosion (T_b), the self acceleration decomposition temperature (T_SADT), the adiabatic decomposition temperature rise (ΔT_ad), the time‐to‐explosion of adiabatic system (t), critical temperature of hot‐spot initiation (T_cr), critical thermal explosion ambient temperature (T_acr), safety degree (SD) and thermal explosive probability (P_TE) were presented to evaluate the thermal hazard of SQ‐2.     

Structure and properties of layered inorganic materials

Inorganic layered materials are a class of advanced functional materials that have attracted considerable attention by virtue of their practical applications in a wide variety of fields. Sys-tematic studies of structure, design, synthesis, and fabrication processing may extend the range of practical utility of inor-ganic layered functional materials, in areas such as food industry,chemical industry, energy engineering, environmental engineer-ing, drug and gene delivery, electronics technology, and materials protection.