Chemical composition and biological activities of essential oil from Filifolium sibiricum (L.) Kitam

The essential oil from Filifolium sibiricum (L.) Kitam were extracted using hydrodistillation and GC-MS was used to analyse the essential oil. The main components were espatulenol (8.55%), geranyl acetate (8.03%), caryophyllene oxide (5.47%), calamenene (4.79%), geraniol (4.28%), calamenene (4.53%), geraniol (4.06%), cedrene epoxide (3.23%), myrtenol (3.18%), transgeranylgeranio (3.13%), etc. The essential oil showed intensive inhibitory effects against MCF-7 with IC₅₀ level of 0.78 mg/mL, HepG-2 with IC₅₀ level of 0.44 mg/mL, SKOV-3 with IC₅₀ level of 0.27 mg/mL, BGC-823 with IC₅₀ level of 0.34 mg/mL. In the antibacterial test, the essential oil showed the significant antibacterial activities. The MIC and MBC values were 5.20 and 5.20 mg/mL against Staphylococcus aureus.     

A new veratramine alkaloid from the bulbs of Fritillaria hupehensis

A new highly conjugated alkaloid of veratramine type, 225,25S,5α-veratramine-7(8),12(14)-diene-3β,13β,23β-triol-6-one (1), was isolated from the bulbs of Fritillaria hupehensis Hsiao et K.C. Hsia. Its structure was determined on the basis of spectroscopic evidences.     

羧甲基纤维素钠修饰的聚氨酯泡沫制备磁性吸油材料

采用聚氨酯泡沫为模板,依次修饰羧甲基纤维素钠(CMC)、Fe~(3+),在惰性气氛中高温热处理反应,制备多孔结构的磁性吸油材料.用光学显微镜、扫描电子显微镜、红外吸收光谱、X-射线衍射、接触角等技术对材料进行表征.详细考察了加热反应温度、CMC浓度和Fe~(3+)浓度对材料吸油性能和磁性的影响规律.实验表明,当加热反应温度选择230°C,CMC浓度为0.3 wt%,FeCl_3浓度为0.1 mol/L时,材料吸油性能最佳,对正己烷、二甲苯、环己烷、甲苯、乙酸乙酯、氯仿、机油、原油等有机溶剂和油类分子的吸附容量为10倍左右.磁性多孔材料具有明显的亲油、疏水特性,水的接触角达115.9°,同时材料密度只有0.036g/cm~3,能够漂浮于水面,实现对水面有机溶剂的快速吸附.吸附后的材料在外界磁场控制下,能够通过磁分离方式从水面快速分离.该材料具有良好的循环利用性能,可重复使用20次以上,吸油性能仍然保持良好.     

A bio‐safe cyclophosphazene derivative flame retardant for polylactic acid composites: Flammability and cytotoxicity

An efficient bio‐safe cyclophosphazene flame retardant, 1,5,9,13,16,20‐Hexaoxa‐7,14,21‐triaza‐6λ⁴,8λ⁴,5λ⁴‐triphosphatrispiro[5.1.5.1.5.1]heneicosa‐6,8(14),15(21)‐triene (HCPO), was synthesized, and then was incorporated into polylactic acid (PLA) to improve the fire safety. The chemical structure of HCPO was confirmed by Fourier‐transformed infrared spectroscopy, mass spectrometry, and nuclear magnetic resonance spectroscopy. The thermal stability of the compound was characterized by thermogravimetric (TG) analyzer. The cytotoxic effects of HCPO to cells were evaluated. Fire behavior and thermal stability of PLA composites were investigated by vertical burning, limiting oxygen index (LOI), TG analysis, and cone calorimeter. The morphology of residual charring was observed by scanning electron microscope. The results showed HCPO was bio‐safe, and highly effective to enhance the flame retardancy of PLA composites. The LOI value was increased from 18.4 to 27.5 and UL‐94 grade achieved V‐0 for the PLA composite containing only 2% HCPO and 2% pentaerythrotol. It was demonstrated that intermolecular cross‐linking reaction between pentaerythrotol and HCPO in high temperature range could accelerate the formation of compact char layers.     

U型管内液柱振动的演示实验研究

根据实验结果，分析了影响U型管中液柱振动的各种因素，给出了获得好的演示效果的改进措施．     

Sharp maximal function estimate and weighted inequalities for maximal multilinear singular integrals

For maximal multilinear Calderón-Zygmund singular integral operators, the sharp maximal function estimate and some weighted norm inequalities are obtained.     

A STUDY ON SHIP VIBRATION USING FINITE ELEMENT METHOD

when the beam theory was used to calculate ship hull vibration,greater discrepancies were found between theoretical cal-culations and actual measurements especially at higher modes.Thusthe beam model cannot be considered as a practical one for higher-mode calculations.This paper presents the application of two-dimensional finite element model for the calculation of ship ver-tical vibration.Using the multi-element structural dynamic a-nalysis program DDJ(DL)developed by ourselves,the hull vibra-tion analysis of two ships(vessel A and vessel B)was carriedout on the Model-709 Computer made in the People’s Republic ofChina.The results of the calculation,when compared with actualmeasurements.show that the two-dimensional model is much moreefficient than the traditional beam model.The agreement be-tween the calculations and measurements has been improved greatly,and this discrepancy at the4th·and5th-modes has decreased towithin5%as compared to that of more than20%in the traditionalmodel.Furthermore.the mode     

全波段正常色散光子晶体光纤中超连续谱的产生

设计了一种铅硅酸盐SF57 材料的光子晶体光纤, 利用有限元法数值模拟了该光纤的 色散特性. 研究结果显示在整个透明波段光纤具有正常色散. 利用自适应分布傅里叶法求解非线性薛定谔方程, 对中心波长为1550 nm, 初始脉宽为150 fs 的脉冲在该光纤中传输进行了模拟, 获得了关于入射脉冲中心波长对称的展宽范围超过了600 nm 的超平坦连续光谱, 并且光谱具有极其稳定和 相干的特性. 关键词： 光子晶体光纤 超连续谱产生 正常色散     

船用复合材料螺旋桨研究进展

复合材料具有比强度高,阻尼性能好及可调整纤维铺层以控制结构变形等优点.复合材料应用于螺旋桨将改善螺旋桨的推进性能和振动特性.通过对国内外复合材料螺旋桨研究成果的回顾、总结和归纳,得出了传统的算法已不满足复合材料螺旋桨的设计和预报要求,复合材料螺旋桨的设计和预报算法需考虑桨叶变形引起的空间流场变化的结论.分析了可借助纤维增强材料所具有的弯扭耦合特性,调整桨叶纤维材料铺层和桨叶结构形式来提高螺旋桨推进效率的规律性.总结了复合材料螺旋桨研究中的关键技术和复合材料螺旋桨设计流程,并指出了复合材料螺旋桨未来研究的趋势.      

激光金等离子体的电子离子碰撞电离速率系数

电子离子碰撞电离过程在超组态碰撞辐射(SCROLL)模型中真实模拟非局域热动力学平衡(non-LTE)高Z材料Au激光等离子体M带谱5f-3d跃迁中各种复杂离子的电离态特性,诸如离子的平均电离度和电荷态分布是一个主要过程.基于准相对论扭曲波玻恩交换近似,采用组态平均的方法,从头计算了金M带类铁金离子-类锗金离子的电子离子碰撞电离速率系数,其中电离截面的高能行为由Bethe系数决定.结果表明:在"神光Ⅱ"实验装置诊断的电子温度～2keV,电子密度～6×1021cm-3范围内,这些参数有利于使用超组态碰撞辐射模型拟Au的激光等离子体M带细致谱5f-3d跃迁的平均电离度和电荷态分布.