Acyl chloride‐facilitated condensation polymerization for the synthesis of heat‐sensitive poly(anhydride‐ester)s

We succeeded in developing the acyl chloride‐facilitated condensation polymerization method for the synthesis of new poly(anhydride‐ester)s with aromatic side groups, which cannot be polymerized by the classic melt condensation polymerization method. Using chlorinated and acylated carboxylic acids as the intermediates, the polymerization was carried out at low temperatures of 120 or 135 °C to yield pure poly(anhydride‐ester)s of molecular weights as high as 1.55 × 10⁵ with minimal side‐reactions. A homogeneous route of preparation was developed and optimized, using butyric anhydride as the acylating reagent and oxalyl chloride as the chlorinating reagent. A comparison of the mechanisms of the classic method and the new method indicates that the effects of transacylation—cyclization and oligomer formation—were greatly reduced due to the high reactivity of carboxylic acid chloride and the steric effect of bulky acyl groups. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5899–5915, 2007     

Effect of end groups on complexation kinetics between cyclodextrins and guest polymers

α‐Cyclodextrin (α‐CD) has been complexed with various poly(ethylene glycol) (PEG) derivatives in aqueous solution. It has been found that the end groups of PEG derivatives affect the complexation kinetics greatly, but have only a little influence on the thermodynamic behavior. By increasing the hydrophobicity of end groups, the complexation speeds up rapidly. On the other hand, the bulky end groups slow down the threading of polymeric guests into the cavity of CD. By changing the hydrophobicity and the size of end groups, the complexation rate can be adjusted in the range of several orders of magnitudes, which should be quite useful in the design of new supramolecular systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2050–2057, 2006     

带风险指数的金融均衡的存在性定理及其结构特征(下)

本文主要论证了在不完全市场条件下带风险指数的金融均衡的存在性，并揭示其均衡结构的特征．本文中建立的模型是一、二期货币投入产出金融经济且具有可微的资产结构，这一模型包括了许多具有特殊资产结构的均衡模型，如实资产结构、虚资产结构、恒秩资产结构的均衡模型．因此本文的这一模型具有广泛的应用前景和实用价值．接着给出了本文的金融均衡的存在性定理，再借助微分拓扑给出它的证明过程，这一证明过程较之以前证明均衡存在性的经典方法（如Duffie，D＆W．Shfer（1985）的方法）要简便得多．同时也应注意到本文的这一结论既适用于资产市场下会随机风险因素的情形，也适用于商品空间为无限维的情形，除此之外，还给出了怎样判别资产结构是否属于T类的判别法，为检验均衡存在性提供了更为便利的途径．最后，本文论证了在金融市场里，尽管由于稀缺性的存在，从而导致均衡分配的多样化，然而均衡分配集却形成了一光滑子流，但该流形的维数与稀缺性有关．换句话说，尽管市场是不完全的，但均市分配不确定性的反却是可比的．如此使得人们对均衡资产结构的认识更进一步．     

Surface-enhanced Raman scattering study of polymer on metals. III. Chemisorbed polybenzimidazole and its corrosion-inhibiting properties at high temperature

Chemisorption of polybenzimidazole on silver and copper etched with nitric acid has been observed by surface-enhanced Raman scattering (SERS). The polymer is found to react chemically with silver, forming a complexed film on the surface. The SERS spectra show that polybenzimidazole film inhibits oxidation of the metal at high temperature, unlike chemisorbed benzimidazole, benzotriazole, and poly(4-vinyl pyridine). © 1992 John Wiley & Sons, Inc.     

Least‐squares finite element method on adaptive grid for PDEs with shocks

We apply the least‐squares finite element method with adaptive grid to nonlinear time‐dependent PDEs with shocks. The least‐squares finite element method is also used in applying the deformation method to generate the adaptive moving grids. The effectiveness of this method is demonstrated by solving a Burgers' equation with shocks. Computational results on uniform grids and adaptive grids are compared for the purpose of evaluation. The results show that the adaptive grids can capture the shock more sharply with significantly less computational time. For moving shock, the adaptive grid moves correctly with the shock. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Direct observation of eta 2-imine formation through beta-H abstraction between amide ligands. Neutron and X-ray diffraction structure of a dihydride imine ditantalum complex

Reactions of Ta(NMe2)5 with D2SiR'Ph (R' = Me, Ph) were found to give a dideuteride eta 2-imine complex (Me2N)3Ta(mu-D)2(mu-N-eta 2-N,C-CH2NMe)Ta(NMe2)3(1-d2) through C-H activation of an amide ligand via beta-H abstraction, and the structure of 1 was confirmed by single crystal neutron and X-ray diffraction.     

Fingerprint scaling increases the probability of identifying molecules with similar activity in virtual screening calculations.

Results of systematic virtual screening calculations using a structural key-type fingerprint are reported for compounds belonging to 14 activity classes added to randomly selected synthetic molecules. For each class, a fingerprint profile was calculated to monitor the relative occupancy of fingerprint bit positions. Consensus bit patterns were determined consisting of all bits that were always set on in compounds belonging to a specific activity class. In virtual screening calculations, scale factors were applied to each consensus bit position in fingerprints of query molecules. This technique, called "fingerprint scaling", effectively increases the weight of consensus bit positions in fingerprint comparisons. Although overall prediction accuracy was satisfactory using unscaled calculations, scaling significantly increased the number of correct predictions but only slightly increased the rate of false positives. These observations suggest that fingerprint scaling is an attractive approach to increase the probability of identifying molecules with similar activity by virtual screening. It requires the availability of a series of related compounds and can be easily applied to any keyed fingerprint representation that associates bit positions with specific molecular features.     

Observations on the swelling characteristics of the zwitterionic hydrogel of poly(1-3-sulfopropyl)-2-vinyl-pyridinium-betaine hydrogel

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The densities of the resultant xerogels increased regularly with the content of MBA. Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis. The water contents increased with decreasing content of MBA, the value of 92.7 wt% at the lowest MBA content being higher than that for other zwitterionic hydrogels. Enhanced swelling occurred in 1 M aq. KSCN at each MBA content, the total swelling being 98.1 wt% at the lowest crosslinker content. Swelling increased with increasing temperature. An approximate procedure to formulating swelling equilibrium in term of the volume fraction of water in hydrogel, in conjunction with the van’t Hoff equation, yields a small positive value for the enthalpy of swelling. This is compared with values derived similarly for other hydrogels.