Effect of heat treatment on electronic phase in underdoped La2-xSrxCuO4 single crystal

Superconducting La1.937Sr0.063CuO4 crystals grown by the travelling-solvent floating-zone technique were thermally treated under various temperatures and oxygen pressures for moderately adjusting the oxygen content. The response of intrinsic electronic property of the crystals to the change of hole density in La2-xSrxCuO4 in the vicinity of the magic doping of x= 1/16 （= 0.0625） is studied in detail by magnetic measurements under various fields up to 1 T. It is found that when the superconducting critical temperature （Tc） increases with the oxygen content, there appears also a new subtle electronic state that can be detected from the differential curves of diamagnetic susceptibility dx/dT of the crystal sample. In contrast with the intrinsic state, the new subtle electronic state is very fragile under the magnetic fields. Our results indicate that a moderate change in oxygen doping does not significantly modify the intrinsic electronic state originally existing at the magic doping level.     

光学读出微梁阵列红外成像及性能分析

在构建的光学读出微梁阵列(焦平面阵列FPA)非制冷红外成像系统中，实现了无硅基底FPA置于空气中对人体的热成像. 通过FPA在不同真空度环境条件下的成像结果进行比较，分析了热导和系统噪声值随气压变化的关系，以及对系统成像性能的影响，并对气体分子热运动自由程大于空气传热层特征尺度时的气体热传导模型进行了修正分析和实验验证. 实验结果表明：FPA置于空气中时，气体分子撞击微梁引起的微梁反光板无序振动产生的光学读出噪声成为系统噪声的主要来源. 当真空度小于1Pa时，总热导和光学读出噪声值的变化都趋于平缓；当真空度小于10^-2Pa时，空气热导的影响可忽略，总热导降低到微梁感热像素的辐射极限，光学读出噪声也降低到一极小值. 实验结果与理论分析相符合. 关键词： 非制冷红外成像 光学读出 双材料微梁阵列 热导     

A characterization of almost simple K 3-groups

It is a well-known fact that characters of a finite group can give important information about the group's structure. Also it was proved by the third author of this article that a finite simple group can be uniquely determined by its character table. Here the authors attempt to investigate how to characterize a finite almost simple group by using less information of its character table, and successfully characterize the almost simple K₃-groups by their orders and at most three irreducible character degrees of their character tables.     

Effective synthesis of benzyl halides triggered by in situ prepared hypervalent halides

An effective approach for the direct benzylhalogenation with in situ generation of hypervalent halides has been developed.A variety of benzyl halides are produced in moderate to excellent yields(up to 99%) with high regioselectivities.UV absorption spectrum is employed to detect the formation of ferr-butyl hypoiodite.     

Improvement in Uranium Adsorption Properties of Amidoxime-Based Adsorbent Through Cografting of Amine Group

Amidoxime (AO)/amine co-functionalized polypropylene fiber adsorbents were prepared. The all-polymeric structures were characterized by using Fourier transform infrared spectroscopy (FTIR), optical microscope, contact angle meter and electron spin resonance (ESR) analysis methods, confirming the grafting, modification, and amidoximation stages gravimetrically, spectroscopically, and visually. The properties for the removal of uranyl(VI) from aqueous solutions were investigated. For amidoxime (AO) fiber, high adsorption rate was observed within the first 30 minutes and the plateau value of 40.6% uranium loading (0.0812 mg/g) was reached at around 30 minutes. The adsorption equilibrium for AO/amine fiber was attained within 20 minutes, resulting in the adsorption of 92.6% uranium loading (0.185 mg/g). The percentage of adsorption increases with increasing pH value (2–6), reaches a maximum at pH 6.0 and then remains almost constant for AO/amine fiber, whereas reduces slightly for AO fiber.     

基于CA和LS-SVM的TE过程多模型建模

针对TE化工过程高度非线性、复杂性的特点,本文提出了一种基于相关分析和最小二乘支持向量机对TE过程进行多模型建模方法,以提高模型性能。首先对TE过程采用相关分析法划分为3个子系统,对每个子系统分别采用基于C-均值聚类的最小二乘支持向量机建模和基于k均值聚类的最小二乘支持向量机多模型建模。实验表明,基于K-均值聚类的多模型建模能简化计算、提高模型精度、并且能更好的预测模型输出。     

Synthesis of structurally diverse diarylketones through the diarylmethyl sp CH oxidation

Under open-flask conditions, an efficient method to assemble a series of diversely functionalized diarylketones in the presence of commercially available NBS has been developed. Yields of up to 99% have been achieved employing diarylmethanes as starting material. Based on ¹⁸O-labeled experiment, the addition of stoichiometric water eventually leads to excellent yields in all carbonylation cases.     

Ultrabroadband superoscillatory lens composed by plasmonic metasurfaces for subdiffraction light focusing

Conventional optics is diffraction limited due to the cutoff of spatial frequency components, and evanescent waves allow subdiffraction optics at the cost of complex near‐field manipulation. Recently, optical superoscillatory phenomena were employed to realize superresolution lenses in the far field, but suffering from very narrow working wavelength band due to the fragility of the superoscillatory light field. Here, an ultrabroadband superoscillatory lens (UBSOL) is proposed and realized by utilizing the metasurface‐assisted law of refraction and reflection in arrayed nanorectangular apertures with variant orientations. The ultrabroadband feature mainly arises from the nearly dispersionless phase profile of transmitted light through the UBSOL for opposite circulation polarization with respect to the incident light. It is demonstrated in experiments that subdiffraction light focusing behavior holds well with nearly unchanged focal patterns for wavelengths spanning across visible and near‐infrared light. This method is believed to find promising applications in superresolution microscopes or telescopes, high‐density optical data storage, etc.

     

An Electrochemical Way to Generate Amphiphiles from Hydrazones for the Synthesis of 1,2,4-Triazole Scaffold Cyclic Compounds

An electro-oxidative cyclization pathway in which hydrazones are selected as starting materials to generate amphiphiles by reacting with benzylamines and benzamides was reported. This strategy successfully prepared a series of 1,2,4-triazoles in satisfactory yields. Moreover, the use of cheap stainless steel as the anode, the feasibility to conduct the transformation as a one-pot reaction and the proof that scaling-up these reactions is possible make this transformation attractive for potential application in industry.     

Detecting functional connectivity in the resting brain: a comparison between ICA and CCA

Independent component analysis (ICA) and cross-correlation analysis (CCA) are general tools for detecting resting-state functional connectivity. In this study, we jointly evaluated these two approaches based on simulated data and in vivo functional magnetic resonance imaging data acquired from 10 resting healthy subjects. The influence of the number of independent components (maps) on the results of ICA was investigated. The influence of the selection of the seeds on the results of CCA was also examined. Our results reveal that significant differences between these two approaches exist. The performance of ICA is superior as compared with that of CCA; in addition, the performance of ICA is not significantly affected by structured noise over a relatively large range. The results of ICA could be affected by the number of independent components if this number is too small, however. Converting the spatially independent maps of ICA into z maps for thresholding tends to overestimate the false-positive rate. However, the overestimation is not very severe and may be acceptable in most cases. The results of CCA are dependent on seeds location. Seeds selected based on different criteria will significantly affect connectivity maps.