用数字干涉仪测量变形镜影响函数的实验研究

分析了变形反射镜面形影响函数的意义，鉴于自适应光学系统中波前探测大都以测量波前斜率为基础的特点，提出应研究斜率影响函数，并在此基础上构成波前复原矩阵。还介绍了用数字干涉仪测量变形镜影响函数的方法和结果，并对测量结果进行了分析，得到了影响函数的各种参数，例如：交连值，高斯指数，特征宽度等。并将干涉法测量斜率影响函数的结果与实际的哈特探测器的测试结果进行了比较。     

垂直加热管外自由降膜流的破断特性

在较宽液膜雷诺数和进口温度范围内对垂直加热管外自由降膜流破断特性进行了实验研究。应用热物理学相似分析的方法整理实验数据，给出新的破断准则数综合关系式，并与１９９３年发表的另一些作者的结果作了比较。实验参数的变化范围如下：ｔｉｎ＝２０～９０℃，最大液膜雷诺数Ｒｅ为１．２１×１０４，最大热流密度达１．３９×１０５ｗ／ｍ２。     

太阳米粒结构相关哈特曼-夏克波前传感模拟研究

基于互相关因子和绝对差分算法以及相关哈特曼－夏克波前传感器的基本原理，根据室内模拟太阳米料结构研究了低对比度扩展目标情况下应用相关哈特曼－夏克波前传感器探测波前误差的可行性，结果表明，相关哈特曼－夏克波前传感器能够有效探测光学波前误差。     

Quantum-limited noise performance of a mode-locked laser diode

Low-noise operation of a 9-GHz hybridly mode-locked laser diode is demonstrated. The integrated timing jitter was 47 fs (10 Hz to 10 MHz) and 86 fs (10 Hz to 4.5 GHz), with a pulse width of 6.7 ps. The noise performance as a function of filter bandwidth and oscillator noise is also addressed.     

Self-stabilized passive, harmonically mode-locked stretched-pulse erbium fiber ring laser

We have studied a passive, harmonically mode-locked stretched-pulse erbium fiber ring laser with net positive dispersion that is self-stabilized by gain depletion and electrostriction. Periodic pulses with supermode suppression of >75 dB and picosecond jitter are achieved. The pulses are compressible to 125 fs by external chirp compensation. The repetition rate is 220 MHz, and the average power is as high as 80 mW.     

Polarization beam splitter based on dielectric periodic structure with different EFCs for two polarizations

A dielectric multi-layered structure is studied in this letter. It is found that at some frequency ranges, the equal-frequency contours (EFCs) are almost flat for one polarization but still curve for the other. Based on this property, we propose a novel polarization beam splitter.     

缘线匹配对非定常流动影响初探

为深化缘线匹配对叶轮机非定常流动影响的认识,本文以关注尾迹撞击叶表展向轨迹为出发点,围绕缘线匹配对叶轮机非定常流动及性能影响进行了初步数值探索.研究表明:不同缘线匹配时叶片整体性能参数具有不同的脉动水平;给定缘线匹配下,整体性能参数脉动幅值随工况几乎不变或变化很缓;在设计点为达到降低某种脉动目的而实施的缘线匹配在非设计点同样有效;尽管微弱,数值模拟中还发现缘线匹配对上游尾迹随流掺混产生影响;缘线匹配严重影响时均相关项量值水平,尤其在叶尖、叶根和前缘附近.     

Theoretical and experimental investigation of thermal effects in a high power Yb-doped double-clad fiber laser

In this paper, based on the thermal conduction equations and the steady-state rate equations, a theoretical and numerical analysis of thermal effects is investigated for a single end pumped Yb-doped double-clad fiber laser (YDDC). The distributions of signal power and temperature for different pump powers and fiber parameters are compared. According to the results, the parameters of the optical-cavity have been optimized and an effective method has been adopted to reduce the thermal effects in an experimental investigation. As a result, an output power of 621 W has been obtained with a slope efficiency of 78%.     

Thermoluminescence characteristics of rare-earth-doped LiCaBO3 phosphor

LiCaBO₃ was synthesized by high-temperature solid-state reaction. The influence of different rare earth dopants, i.e. Dy³⁺, Tb³⁺, Tm³⁺ and Ce³⁺, on thermoluminescence (TL) of LiCaBO₃ phosphor was discussed. We studied the TL properties and some dosimetric characteristics of Ce³⁺-activated LiCaBO₃ phosphor in detail. The effect of the concentration of Ce³⁺ on TL was investigated, the result of which showed that the optimum Ce³⁺ concentration was 1 mol%. The TL kinetic parameters of LiCaBO₃:0.01Ce³⁺ were studied by computer glow curve deconvolution (CGCD) method. The three-dimensional (3D) TL emission spectra were also studied, peaking at 431 and 474 nm due to the characteristic transition of Ce³⁺. We also studied the linearity, annealing condition, reproducibility, fading and different heating rate of the LiCaBO₃:0.01Ce³⁺ phosphor.