Rotation-invariant pattern recognition using morphological phase-only correlation

We present a rotation-invariant nonlinear correlator based on the circular harmonic filter (CHF) and the previously proposed morphological phase-only correlator (MPC) [Q. Wang, S. Liu, Opt. Commun. 244 (2005) 93]. We refer to this correlator as a rotation-invariant MPC (RIMPC). Through computer simulation, we compare the output results of RIMPC with those of rotation-invariant MC (RIMC) and CHF when input scene is corrupted by salt-and-pepper noise, white additive Gaussian noise and cluttered background. Our results show that RIMPC yields higher discriminability, sharper and higher correlation peaks and displays better stability against the above three kinds of noise than do the RIMC and common CHF.     

Ultrafast non-linear optical properties of Ge20As25Se55 chalcogenide films

The non-resonant third-order non-linear optical properties of amorphous Ge₂₀As₂₅Se₅₅ films were studied experimentally by the method of the femtosecond optical heterodyne detection of optical Kerr effect. The real and imaginary parts of complex third-order optical non-linearity could be effectively separated and their values and signs could be also determined, which were 6.6 × 10⁻¹² and −2.4 × 10⁻¹² esu, respectively. Amorphous Ge₂₀As₂₅Se₅₅ films showed a very fast response in the range of 200 fs under ultrafast excitation. The ultrafast response and large third-order non-linearity are attributed to the ultrafast distortion of the electron orbitals surrounding the average positions of the nucleus of Ge, As and Se atoms. The high third-order susceptibility and a fast response time of amorphous Ge₂₀As₂₅Se₅₅ films makes it a promising material for application in advanced techniques especially in optical switching.     

Comparison of polarization-mode dispersion tolerances in polarization-multiplexing systems with different modulation formats

The polarization-mode dispersion (PMD) tolerance of 10 Gb/s polarization-multiplexing (PM) system is investigated. Using the importance sampling (IS) method, the outage probabilities of the PM systems with three modulation formats, including on-off keying (OOK), differential phase-shift keying (DPSK) and differential quadrature phase-shift keying (DQPSK), are quantified. When the amplified spontaneous emission (ASE) noise is assumed to be dominant, we evaluate the optical power penalties caused by the PMD effect at bit error rate (BER) of 10⁻¹². The performance of compensated PM systems with variable optical delay line is also described. The simulation results indicate that the OOK signal with higher duty cycle (DC) performs better in the PM systems with PMD compensation. It is found that the higher-order PMD impairs seriously the performance of the PM system, and phase-keying formats are more sensitive to the PMD than the OOK.     

Tunable microwave photonic notch filter using a dual-wavelength fiber laser with phase modulation

A novel tunable microwave photonic notch filter using a phase-modulated dual-wavelength fiber laser is presented. A stable dual-wavelength erbium-doped fiber laser with a linear cavity is formed by a polarization-maintaining uniform fiber Bragg grating (PM-FBG) and a polarization maintaining linearly chirped fiber Bragg grating (PM-LCFBG), both of which were fabricated on a high-birefringence (Hi-Bi) fiber. It is found that a stable room-temperature dual-wavelength operation can be achieved due to the presence of two reflection peaks arising from the orthogonal states of polarization (SOP) of the PM-FBG. Experimental results show stable dual-wavelength lasing operation with a wavelength separation of ∼0.36 nm and a large optical signal-to-noise ratio (OSNR) of over 40 dB under room temperature. The dual-wavelength fiber laser is combined with a phase modulator and a segment of single-mode fiber (SMF) as a dispersive device to form a tunable microwave photonic notch filter. By stretching the PM-FBG to tune the wavelength separation of the dual-wavelength fiber laser, a tunable microwave photonic notch filter with various free spectral ranges (FSRs) and a rejection ratio greater than 35 dB was developed.     

立方钙钛矿RbZnF3电子、弹性和光学性质的第一性原理研究

基于密度泛函理论和赝势平面波方法研究了立方钙钛矿RbZnF3的电子结构和光学性质;利用静水有限应变技术计算研究了RbZnF3弹性常数Cij、体积弹性模量B和剪切模量G随压力的变化关系。基态下,RbZnF3晶格常数a和体积弹性模量B0计算值与实验值以及其他理论值一致。根据能带结构、总态密度以及分波态密度分析可知：基态下立方钙钛矿结构RbZnF3为间接带隙半导体材料,带隙为3.57eV,与其他计算结果比较,本文计算结果偏低,这是由于局域密度近似(LAD)或广义梯度近似(GGA)交换关联函数的局限性所致。基态下RbZnF3的Mulliken电荷分布和集居数说明：RbZnF3属于共价键和离子键所形成的混合键化合物;RbZnF3的电荷总数主要来源于Rb 4s和4p轨道,Zn 3d轨道,以及F 2s和2p轨道。电荷主要从Rb, Zn原子向F原子转移。同时,本文还计算研究了RbZnF3的光学介电函数、吸收系数、复折射率、能量损失谱和反射系数等光学性质。     

空间非均匀场下核间距对不对称分子谐波发射的影响

数值研究了空间非均匀场下核间距离对于不对称分子HeH2+发射高次谐波以及阿秒脉冲的影响。计算结果表明,通过适当调节HeH2+分子离子的核间距离以及空间非均匀参数,不仅谐波发射的截止能量得到了延伸,而且单一的短量子路径也被选择出来对谐波发射起作用。随后适当引入第二束控制激光场,谐波截止能量得到了进一步扩展,形成了两个带宽分别在431eV和372eV的连续平台区。 最后,通过适当的叠加谐波,可获得脉宽为31as-65as的一系列阿秒X射线光源。     

顺式羰基铑碘络合物催化甲醇制乙酸反应的动力学研究

本文运用密度泛函理论DFT-B3LYP方法,对铑、碘元素采用相对论校正赝势基组SDD,对C、O、H采用6-311+G(2d,p)基组,计算研究了顺式羰基铑碘络合物催化甲醇羰基化制乙酸反应的微观机理,优化了各反应物、中间体和过渡态的构型特征,用频率分析方法和内禀反应坐标方法对过渡态进行了验证,运用Kozuch撰写的能量跨度模型获得循环反应的动力学信息,确定了决定循环反应速率的决速过渡态和决速中间体,并利用转化频率评估了催化性能与温度的变化关系.     

高离化Kr33+离子22P -n2S(2≤n≤9)的耦极跃迁行为

本文构造了高离化Kr33+离子 1s2ns (2≤n≤9)和1s22p 态的波函数并利用其计算了体系的非相对论能量。为了得到高精度的理论计算结果,将相对论修正和质量极化效应作为一级微扰计算了体系的总能量和22P -n2S(2≤n≤9)跃迁能,本文的结果与有限的实验数据符合的较好。在此基础上完成了22P -n2S(2≤n≤9)偶极跃迁三种规范下振子强度的理论计算,三者的一致性进一步证明所构造的波函数在整个空间的准确性和可靠性。     

真空退火对L1_0-CoPt薄膜结构、磁性及表面形貌的影响

本文利用磁控溅射的方法制备了L1_0-CoPt薄膜,研究了不同退火条件对薄膜结构、磁性以及表面形貌的影响.通过优化退火温度、保温时间以及升温速率,制备出了具有大矫顽力、高矩形比、粗糙度小的垂直各向异性L1_0-CoPt薄膜.实验发现,较高的退火温度有利于克服CoPt薄膜有序化转变所需要的能量,同时适当延长退火时间可以提高CoPt薄膜的扩散系数,从而促使无序相fcc转化为L1_0有序相fct结构.此外,退火过程中减缓升温速率可以有效减小薄膜粗糙度,从而形成平整连续膜.     

PGA算法在条带式SAS场景目标成像中的应用

本文针对条带式合成孔径声呐(SAS)对场景目标成像应用中面临的方位向残余相位误差导致成像质量降低的问题,探讨了相位梯度自聚焦(PGA)算法在条带式SAS成像方位向相位误差估计和补偿中的应用方法,通过自适应的选点及窗宽估计处理以提高算法对场景目标的适应性,最后通过对场景目标成像的实际湖试数据进行处理和分析,结果验证了该算法改善条带式SAS对场景目标成像质量的有效性。