Thermal stability and photoluminescence property of hexagonal MoO3·0.55H2O microrods

The metastable phase of well-faceted, hexagonal, prism-like molybdenum oxide hydrate (MoO₃·0.55H₂O) was successfully synthesized by evaporating molybdic acid solution prepared through cation membrane electrolysis of Na₂MoO₄·2H₂O aqueous solution. The obtained crystals were characterized by X-ray diffraction (XRD), thermogravimetric (TG), scanning electronic microscopy (SEM) and photoluminescence (PL) spectrophotometry. The as-prepared MoO₃·0.55H₂O rods were of 2–4 μm in width and 5–12 μm in length. The MoO₃·0.55H₂O microrods displayed photoluminescence properties at room temperature and were transformed into stable orthorhombic α-MoO₃ after air annealing at 380 °C. Moreover, the influence of temperature factor on the phase transformation process, morphology and photoluminescence properties of MoO₃·0.55H₂O was investigated in detail.     

Ultrafast Saturable Absorption of Core/Shell Colloidal Quantum Dots

Ultrafast saturable absorption (SA) materials that are capable of blocking the optical absorption under strong excitation have extensive applications in photonic devices. This work presents core/shell colloidal quantum dots (CQDs) which have the quantized energy levels, excellent band gap tunability, and possess significant SA performance. When the band gap is close to the pump pulse energy, the CQDs show significant resonant SA response. At the same excitation conditions, the core/shell CQDs dispersions show better SA response than graphene dispersions, and comparable to the recently reported molybdenum disulfide. The carrier dynamics of the SA of the CQDs is analyzed systematically. The research has also found that the two‐photon absorption of the CQDs show nearly cubic power law of the band gap, while the SA performance keeps almost the same in the nonresonant regime. Further, superior passive Q‐switched laser behavior is observed using the CQDs as a saturable absorber. The results directly reveal the physical processes of this basic problem and broaden the applications of CQDs in photonic devices.     

Application of 3-D Fluorescence: Characterization of Natural Organic Matter in Natural Water and Water Purification Systems

Natural organic matter (NOM) found in water sources is broadly defined as a mixture of polyfunctional organic molecules, characterized by its complex structure and paramount influence on water quality. Because the inevitable release of pollutants into aquatic environments due to an ineffective control of industrial and agricultural pollution, the evaluation of the interaction of NOM with heavy metals, nanoparticles, organic pollutants and other pollutants in the aquatic environment, has greatly increased. Three-dimensional (3-D) fluorescence has the potential to reveal the interaction mechanisms between NOM and pollutants as well as the source of NOM pollution. In water purification engineering system, the 3-D fluorescence can indicate the variations of NOM composition and gives an effective prediction of water quality as well as the underline water purification mechanisms. Inadequately treated NOM is a cause of precursors of disinfection byproducts (DBPs), posing a potential threat to human health. Effective control and measurement/evaluation of NOM have long been an important factors in the prevention of water pollution. Overall, 3-D fluorescence allows for a rapid identification of organic components thus indicating possible sources of water pollution, mechanisms of pollutant interactions, and possible DBPs formed during conventional treatment of this water. This article reviews the 3-D fluorescence characteristics of NOM in natural water and typical water purification systems. The 3-D fluorescence was effective for indicating the variabilities in NOM composition and chemistry thus providing a better understanding of NOM in natural water system and water engineering system.     

Sulphur isotope compositions of components of coal and S-isotope fractionation during its combustion and flue gas desulphurization

Sulphur isotope compositions were determined in two different Polish coals (hard coal and lignite) and by-products originating from their combustion. The desulphurization process was also investigated. It was demonstrated that desulphurization changes the isotopic composition of sulphur emitted in the form of SO(2) to the atmosphere even if the process is conducted in a different way (wet lime technology and electron beam method). This fact has to be considered in the studies regarding anthropogenic sulphur genesis and its fate in the environment.     

High‐mobility solution‐processed zinc oxide thin films on silicon nitride

A high effective electron mobility of 33 cm² V^–1 s^–1 was achieved in solution‐processed undoped zinc oxide (ZnO) thin films. The introduction of silicon nitride (Si₃N₄) as growth substrate resulted in a mobility improvement by a factor of 2.5 with respect to the commonly used silicon oxide (SiO₂). The solution‐processed ZnO thin films grown on Si₃N₄, prepared by low‐pressure chemical vapor deposition, revealed bigger grain sizes, lower strain and better crystalline quality in comparison to the films grown on thermal SiO₂. These results show that the nucleation and growth mechanisms of solution‐processed films are substrate dependent and affect the final film structure accordingly. The substantial difference in electron mobilities suggests that, in addition to the grain morphology and crystalline structure effects, defect chemistry is a contributing factor that also depends on the particular substrate. In this respect, interface trap densities measured in high‐κ HfO₂/ZnO MOSCAPs were about ten times lower in those fabricated on Si₃N₄ substrates. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)

     

Influence of laser power density on damage of comb by photodynamic therapy—simulation and validation of mathematical models

Photodynamic therapy （PDT） has poor therapeutic outcomes for the treatment of port-wine stain （PWS） lesions with long drug-light intervals （DLIs）. This letter investigates the possibility of improving the treatment efficacy through increasing the laser power density using a computer simulation and a cock comb model. The computational model includes a Monte Carlo simulation for the laser distribution and a calculation of the singlet oxygen concentrations （102）. Both simulation and experimental results show that increasing the power density from i00 to 140 mW/cm^2 not only improves the PDT efficacy, but also results in the unwanted skin damage.     

BEPCII直线加速器数字延时触发器的设计与实现

针对北京正负电子对撞机II期（BEPC II）直线加速器升级改造过程中束流位置探测器（BPM）电子学对外部触发信号的需求,设计了一台高精度延时控制、上升时间短和参数灵活调节的数字延时触发器。采用FPGA（现场可编程门阵列）作为主控制器展开设计,重点介绍了基于FPGA的边沿检测模块和多通道延时处理模块的设计与仿真,描述了FPGA和驱动电路的设计方案以及在直线加速器上的应用。经测试,延时可调范围4 ns～4 μs,最小步进4 ns,步进误差0.125%;上升时间2 ns,延时抖动135.4 ps。