The way to high-performance single nanowire photodetectors: problems and prospects

<正>As potential building blocks for micro-nano devices,one-dimensional semiconductor nanowires(NWs)have been widely studied in recent decades.Due to limited dimension and large surface-to-volume ratio,devices based on NWs are more likely to exhibit unique properties.NW photodetectors adopting different materials have been fabricated.However,the performance is greatly affected by several issues such as lattice quality,surface homogeneity,contact electrodes and     

三种胺羧配合物的113Cd NMR研究

该文对Cd-HEDTA(N-(2-羟基乙基)乙二胺-N',N',N'-三乙酸),Cd-PDTA(1,2丙二胺四乙酸)和Cd-DTPA(二乙三胺五乙酸)的¹¹³Cd NMR谱和自旋晶格弛豫时间T₁,及NOE因子进行了研究.结果表明,Cd-HEDTA和Cd-PDTA结构与Cd-EDTA类似,Cd-PDTA双线归因于其可能的两种异构体.Cd-DTPA大的化学位移表明其具有七配位的五角双锥结构.在这种结构中DTPA可用三个氮原子参加配位.对¹¹³Cd自旋晶格弛豫时间分析表明,Cd-DTPA配合物中质子偶极作用机理的贡献较大,这归因于Cd DTPA有更多的乙酸根亚甲基质子参与偶极作用.     

兰州重离子加速器控制系统DSP组件设计

针对重离子加速器部分电源的控制要求,进行了分析研究,提出并实现了一种实时、高效、多功能的控制系统。该系统基于数字信号处理器（DSP）和两片现场可编程门阵列（FPGA）芯片相结合的核心处理构架,在系统后端利用PXI总线接口配合FPGA来与工控机箱中的系统控制器和其他控制组件进行大批量数据交互;系统前端利用直接数字频率合成器、模数转换器和数模转换器等器件结合DSP和FPGA中的控制算法及相应控制机制来实现对不同电源控制参数的处理和功率的输出;平台中两组光纤模块也与FPGA相配合实现对同步触发事例等实时数据的收发和调试。     

Laser Fabrication of Nanostructures on a Pure Aluminum Surface in Air

We report on the fabrication of surface nanoparticles and micro/nanograting structures on bulk pure aluminum in air using a 150 fs, 775 nm femtosecond laser. We investigate the size of the generated surface nanoparticles under irradiation with different femtosecond laser pulses. Smaller nanoparticles can be induced by a larger number of laser pulses and a lower laser fluence. In addition, we observe the formation of micro/nanogratings when the laser focus is scanned across a pure aluminum surface in air. We obtain micro- and nano-grating composite structures on a pure aluminum surface by adjusting the laser fluence and scan velocity. Femtosecond laser surface ablation of bulk pure aluminum in air is potentially a promising technique for efficient fabrication of surface nanostructures.     

Novel miniature high power ring filter

The power handling capability of high temperature superconducting (HTS) filters is limited due to current concentration at the edges of the superconducting films. This problem can be overcome by using ring resonator, which employs the edge current free and reduces the current concentration. However, this kind of filter has large size. In order to reduce the cost and size and increase the power handling capability, in this paper a HTS photonic bandgap (PBG) structure filter is developed. The proposed pass band filter with PBG structure exhibits center frequency 12.23 GHz, steepness (about 35 dB/GHz), bandwidth (−3 dB bandwidth is 0.045 GHz), and low insertion loss (about −0.5 dB), and can handle input power up to 1 W (this value was limited by the measurement instrument used in the experiment). The size is reduced by 25%, insertion loss reduced by 37.5%, and steeper roll-off of the filter is also obtained compared with that in published literature.     

离子速度成像技术研究2-溴戊烷的光解离动力学

运用离子速度成像技术研究了2-溴戊烷分子在～234 nm处的光解离动力学. 通过分析光解产物Br(²P_3/2)(简称Br)和Br(²P_1/2) (简称Br*)的速度影像,分别得到其速度分布和角度分布. Br和Br*的速度分布可以用两个高斯分布拟合,分别对应于2-溴戊烷在～234 nm处两个独立的光解离反应通道. 高能的高斯分量对应于C-Br伸缩振动模式的直接解离,低能的高斯分量对应于弯曲振动和C-Br伸缩振动耦合所导致的解离. 确定出光解离产物Br的相对量子产率为0.892,结合Br和Br*碎片的各项异性参数和溴原子的相对量子产率,讨论了³Q₀、³Q₁和¹Q₁激发态分别对产物Br和Br*的贡献. 通过对比溴代戊烷4种同分异构体光解离过程的差异,讨论了分子烷基分支化对光解机理的影响.     

A Mössbauer spectroscopic study of an industrial catalyst for dehydrogenation of etylbenzene to styrene

Iron oxide catalyst with spinel structure used for dehydrogenation of ethylbenzene is one kind of important catalyst in petrochemical industry. In this work several series of industrial catalyst were prepared with different components and different manufacturing processes. Mössbauer Spectroscopy has been used to determine the optimal components and the better manufacturing process for spinel structure formation. The results may prove useful for producing the industrial dehydrogenation catalyst with better catalytic property.     

Liquid crystal lens with focus movable in focal plane

A liquid crystal lens with focus movable in the focal plane is reported. There are three electrodes in the cell. One electrode with a hole in the center is divided into four subelectrodes. The potential of each subelectrode is adjusted to produce a desired asymmetrical phase transformation resulting in off-axis movement of the focus. The potential of another electrode is adjusted to maintain the focus in the focal plane. Movements of the focus in three directions in the focal plane are demonstrated experimentally, and off-axis movement as large as approximately 800 μm is realized.     

二氧化碳分子离子经由Ã2Πu1/2电子态振动能级共振的光解动力学：一项时间切片离子速度成像技术研究

We report on the photodissociation dynamics of CO₂⁺ via its òΠ_u,1/2 state using the scheme of [1+1] photon excitation that is intermediated by the mode-selected òΠ_u,1/2( u1,u2,0) vibronic states. Photodissociation fragment exciation spectrum and images of photofragment CO⁺ have been measured to obtain reaction dynamics parameters such as the available energy and the average translational energy. Combining with the potential energy functions of CO₂⁺, the dissociation mechanism of CO₂⁺ is discussed. The conformational variation of CO₂⁺ from linear to bent on the photodissociation dynamics of CO₂⁺ is verified.     

某型飞机驾驶杆线性位移差分变压器传感器信号调理校正

飞机驾驶杆LVDT(线性位移差分变压器)传感器信号测试校正在航空测控研究领域具有十分重要的意义,提出了一种针对某型飞机驾驶杆LVDT传感器信号精确调理校正方法;介绍了飞机驾驶杆LVDT传感器原理,分析了AD598 LVDT调理芯片的使用局限,利用最小二乘法设计了精确调理校正方法;基于VC++2010开发环境,利用高精度的模拟校正源产生模拟激励校正信号,设计了驾驶杆LVDT多通道软件自校正方法,它可以有效提高解调电路的线性度和对称性,克服了AD598常规调理电路的使用局限,从而实现驾驶杆LVDT信号精确检测;理论分析与数值试验验证了所提方法的正确性和有效性。