Entanglement of the l- and the r-photons in an anisotropic crystal

Light incident onto an anisotropic crystal is divided into the ordinary and the extraordinary waves which vibrate in two perpendicular directions. Because of the tensor property of the dielectric constant, the direction of the electric displacement is not parallel to the vector of the incident electric field. An optical torque is induced by incidence of the linearly polarized light and propagating through the crystal. The optical torque tends to rotate the directions of eigenvibration which results in self-modulation of the ordinary and the extraordinary waves, and causes an energy splitting of the left (l)-, and the right (r)-handed circularly polarized waves in the crystal. The l- and the r-photons are correlated through the optical torque, which are found to be in an entanglement state.     

Preconcentration and Separation of Gold(III) from Ore Samples by Solid-Phase Extraction Prior to Its Catalytic Fluorescent Determination

ABSTRACT

A new catalytic kinetic fluorescent quenching method for the determination of trace gold(III) was investigated. The method was based on the catalytic effect of gold on oxidation of 3-(3′-methylphenyl)-5- (2′-arsenoxylphenylazo) rhodanine by hydrogen peroxide in potassium hydrogen phthalate–hydrochloric acid (pH = 3.4). Under the optimum conditions, the great decrease of fluorescence intensity has a linear relationship against the concentration of gold in the range of 0 to 12.0 µg·L^?1 with a detection limit of 6.0 × 10^?10g·L^?1. The coexistent metal ions can be separated, and gold can be enriched by TBP resin of solid-phase extraction, which greatly improves the selectivity and sensitivity of the system. The method can be used to determine trace amounts of gold in ore samples successfully with satisfactory results.     

High pressure X-ray diffraction study on BaWO4-II

BaWO₄-II has been synthesized at 5 GPa and 610°C. Its high pressure behavior was studied by in situ synchrotron X-ray diffraction measurements at room temperature up to 17 GPa. BaWO₄-II retains its monoclinic structure. Bulk and axial moduli determined by fitting a third-order Birch–Murnaghan equation of state to lattice parameters are: K ₀=86.2±1.9 GPa, K ₀(a)=56.0±0.9 GPa, K ₀(b)=85.3±2.4 GPa, and K ₀(c)=146.1±3.2 GPa with a fixed K′=4. Analysis of axial compressible modulus shows that the a-axis is 2.61 times more compressible than the c-axis and 1.71 times more compressible than the b-axis. The beta angle decreases smoothly between room pressure and 17 GPa from 93.78° to 90.90°.     

Effect of Ag underlayer thickness on the microstructure and magnetic properties of L10-FePt films

FePt/Ag films were deposited on thermally oxidized Si(100) substrates by magnetron sputtering at room temperature and then the as-deposited films were annealed at 500 ^°C. The microstructure and magnetic properties of the films have been investigated by X-ray diffraction and vibrating sample magnetometry. The results indicate that introduction of the Ag underlayer promotes an ordering transformation of the FePt phase due to thermal tensile stress between the Ag underlayer and the FePt film. The in-plane tensile stress induced by the Ag underlayer should stretch the horizontal lattice parameter of FePt; thus, it is helpful for the ordering transformation. With increasing Ag underlayer thickness, the ordering parameter and coercivity first increase and then decrease. When the Ag underlayer thickness is 12 nm, the ordering parameter and coercivity of the film reach the maximum values, respectively. The Ag underlayer thickness also affects the magnetization reversal mechanism.     

金属Bi的卸载熔化实验研究

在火炮上利用金属铋(Bi)直接撞击单晶LiF窗口, 开展了金属Bi反向碰撞的冲击加载-卸载实验研究, 实验采用激光位移干涉测试系统, 获得了金属Bi在11—16 GPa压力范围内完整的卸载粒子速度剖面. 实验结果结合特征线方法计算表明, 金属Bi经冲击加载进入体心立方相, 并在11—16 GPa冲击压力作用下发生了卸载熔化, 界面粒子速度剖面的卸载拐点, 对应着金属Bi经冲击加载后发生的卸载熔化, 而这一结论同Cox的理论计算及一维流体力学程序计算结果基本一致. 本文报道的金属Bi卸载波剖面解读技术, 对于认识冲击加载下其他相似材料相变具有实用价值.     

非线性介质中强光对弱光聚焦的控制研究

从理论和实验上分析了强光控制弱光脉冲聚焦的方法, 该方法可以灵活地控制弱光的聚焦过程和特性. 通过研究两光束共同传输, 利用强抽运光在相互作用时为弱探测光提供诱导非线性效应, 从而使弱探测光发生聚焦. 得到了在抽运光保持不变情况下探测光的解析解, 并在实验上得到验证. 进一步研究了强抽运光对弱探测光焦点位置的影响. 结果显示: 通过改变抽运光功率、束宽能够有效地控制弱探测光的聚焦过程和焦点位置. 关键词： 诱导聚焦 自聚焦 非线性折射率     

High-order soliton generation in dispersion flattened fiber

By using the amplified 10-GHz, 5.5-ps sech2 pulses with high quality and chirp-free from regeneratively mode-locked fiber laser (RMLFL) as the soliton source, 2-5 order optical soliton phenomena are observed successfully in a 4.28-km dispersion flattened fiber. The experimental results agree well with the theoretical calculation.     

Surface-enhanced resonant Raman spectroscopy (SERRS) of single-walled carbon nanotubes absorbed on the Ag-coated anodic aluminum oxide (AAO) surface

In this paper, we developed a new kind of substrate, the silver-coated anodic aluminum oxide (AAO), to investigate the characters of surface-enhanced resonant Raman scattering (SERRS) of the dilute single-walled carbon nanotubes. Homogeneous Ag-coated AAO substrate was obtained by decomposing the AgNO₃ on the surface of AAO. single-walled carbon nanotubes (SWNTs) were directly grown onto this substrate through floating catalyst chemical vapor deposition method (CVD). SERRS of SWNTs was carried out using several different wavelength lasers. The bands coming from metallic SWNTs were significantly enhanced. The two SERRS mechanisms, the “electromagnetic” and “chemical” mechanism, were mainly responsible for the experiment results.     

An investigation of distribution parameters for fluorine ion implantation in indium-tin-oxide films

Implanted-fluorine profiles in ITO films have been accurately measured using the ¹⁹F(p,αγ)¹⁶O resonance nuclear reaction at E_R=872.1 keV, with width Γ=4.2 keV. A proper deconvolution calculation method was used to extract the true distribution of fluorine from the experimental excitation yield curves. The experimental range distribution parameters, R_p and ΔR_p, were compared with those obtained from Monte Carlo simulation codes. PACS 61.72.Ww; 68.55.Ln     

椭圆柱体在牛顿流体中运动的格子Boltzmann方法模拟

用格子Boltzmann方法建立了椭圆柱体的二维动力学模型，利用所建立的模型，数值模拟了 牛顿流体中不同形状的椭圆柱体在相同初始条件下的运动和同一椭圆柱体在不同初始条件下 的运动，并通过比较相同条件下圆柱体的运动，讨论了椭圆柱体二维运动的特征，得到了一 些有意义的结果. 关键词： 格子Boltzmann方法 椭圆柱体 牛顿流体