Sidewall-insert compound based on ZnO-treated aramid pulp fibers for run-flat tires

Abstract

To improve the endurance performance of run-flat tires by preventing the sidewall from folding at zero air pressure, a master batch of natural rubber and ZnO-treated aramid pulp (AP) is applied to the rubber sidewall-insert-layer compound. The mechanical, viscoelastic, and fatigue properties of the compounds are investigated by varying the AP content, and the endurance performance of actual run-flat tires is assessed. The results indicate that the mechanical properties are improved and the hysteresis is reduced as the AP content increased. The overall trend of the endurance times of the run-flat tires is consistent with the results of the DeMattia tests, constant-strain fatigue tests, and high-temperature tensile tests. The run-flat endurance time of the tire containing one part per hundred rubber (phr) of AP is superior to that of the tire containing 3 phr of AP because of the enhanced dispersion of the AP fibers.     

轴向拉伸对Ni纳米线结构和稳定性的影响

采用推广模拟退火算法和Sutton Chen势, 选取fcc[111]结构的Ni纳米线为初始构型, 研究了轴向拉伸对Ni纳米线的结构和稳定性的影响。 研究结果表明: 拉伸程度的大小对Ni纳米线的结构和稳定性有很大的影响; 随着拉伸强度的变化, 纳米线结构分别为fcc[111]结构、 (6, 0)型管＋中心柱状结构（又为螺旋结构）、 (6, 3) 型管＋中心柱状结构、 fcc[110]结构、 过渡结构（为规则结构）和缺陷结构; 从结合能分布来看, 结合能先减小, 再增大, 结合能最小时对应最稳定结构 (6, 0) 型管＋中心柱状结构（又为螺旋结构）。 Atomic structures and stabilities of Ni nanowires are studied by using the generalized simulated annealing method with Sutton Chen potential. The initial structure is face centered cubic [111] structure. The result shows that the length of the supercell strongly affects the structures and stabilities of Ni nanowires. fcc [111] structure, (6, 0), (6, 3) nanowires, fcc[110], transition structure and defect structure are found for different wire lengths. And from the analyses of the binding energy, it is found that (6, 0) nanowires (helical structure) is the most stable form.     

垂直入射时无限长分层柱电磁散射的改进算法及应用

结合非均匀球粒子对平面波散射的散射场计算的改进算法,提出了平面波垂直入射无限长分层圆柱散射场快速稳定而有效的改进电磁散射算法。与已有算法相比,改进算法所能计算的无限长非均匀介质圆柱的尺寸参量突破10000,计算层数达到106,并且计算时间很短,最多仅为几秒。该算法可以用于不同的波段以及不同领域的任意无耗或吸收无限长圆柱体散射场的计算。最后将该算法应用于梯度折射率聚合物光纤(GI-POF)散射特性的研究,为非接触、在线测量聚合物光纤折射率分布提供了理论依据。     

Unprecedented coloration of rutile titanium dioxide nanocrystalline thin films

In this communication, TiO2 nanocrystalline thin films synthesized by a room temperature (27 degrees C) chemical dip process. To our knowledge, this is first report of the preparation of nanoscale rutile TiO2 particles from common inorganic salt at such low temperature. Interestingly, unprecedented dynamic color change accompanies with titanium dioxide grain size, which can be seen with the naked eye that generated curiosity in our mind to check UV-vis absorption, where significant changes were observed. The room temperature synthesized thin films of rutile titanium dioxide make it a potential candidate for high-compatibility material, which can be used in artificial heart valves.     

Sensitivity enhancement by exchange mediated magnetization transfer of the xenon biosensor signal

Hyperpolarized xenon associated with ligand derivatized cryptophane-A cages has been developed as a NMR based biosensor. To optimize the detection sensitivity we describe use of xenon exchange between the caged and bulk dissolved xenon as an effective signal amplifier. This approach, somewhat analogous to 'remote detection' described recently, uses the chemical exchange to repeatedly transfer spectroscopic information from caged to bulk xenon, effectively integrating the caged signal. After an optimized integration period, the signal is read out by observation of the bulk magnetization. The spectrum of the caged xenon is reconstructed through use of a variable evolution period before transfer and Fourier analysis of the bulk signal as a function of the evolution time.     

Encapsulation of Photosensitizers and Upconversion Nanocrystals in Lipid Micelles for Photodynamic Therapy

Photodynamic therapy (PDT) is a promising method for cancer therapy. However, it is constrained by limited penetration depth of visible light, hydrophobicity of photosensitizers, and lack of tumor targeting. In this work, the photosensitizer zinc phthalocyanine (ZnPc) and upconversion nanocrystals (UCNs) are encapsulated into OQPGA‐PEG/RGD/TAT lipid micelles. The UCNs acting as a nanotransducer convert deep‐penetrating near‐infrared (NIR) light to visible light for activating the photosensitizer. OQPGA‐PEG/RGD/TAT lipid micelles are used as a carrier for the photosensitizer, with improved biocompatibility and cancer‐targeting ability. The results show that the photosensitizer ZnPc‐ and UCNs‐loaded OQPGA‐PEG/RGD/TAT lipid micelles are nanoparticles with an average size of 25 nm. The lipid micelle nanoparticles are stable in water with low leakage of photosensitizer. The absorption peak of the photosensitizer overlaps with the emission peak of UCNs, so the visible fluorescence emitted from the UCNs upon excitation by the NIR laser at 980 nm can activate the photosensitizer to produce singlet oxygen for PDT. The targeting RGD peptide and cell‐penetrating TAT peptide on the surface help the nanoparticles getting into cancer cells. The OQPGA‐PEG/RGD/TAT lipid micelles encapsulated with both the photosensitizer ZnPc and UCNs could be used for targeted PDT by using deep‐penetrating NIR light as the light source.     

Dynamics of charge transfer at Au/Si metal-semiconductor nano-interface

An ab initio analysis of the periodic array of Au/Si nanostructure composed of gold clusters linked to silicon quantum dot (QD) co-doped by aluminium and phosphorus along [111] direction is presented in this paper. The density functional theory (DFT) is used to compute the electronic structure of the simulated system. Non-adiabatic coupling implemented in the form of dissipative equation of motion for reduced density matrix is used to study the phonon-induced relaxation in the simulated system. The density of states clearly shows that the formation of Au–Si bonds contributes states to the band gap of the model. Dynamics of selected photo-excitations shows that hole relaxation in energy and in space is much faster than electron relaxation, which is due to the higher density of states of the valence band.     

A type of conserved quantity of Mei symmetry of Nielsen equations for a holonomic system

A type of structural equation and conserved quantity which are directly induced by Mei symmetry of Nielsen equations for a holonomic system are studied.Under the infinitesimal transformation of the groups,from the definition and the criterion of Mei symmetry,a type of structural equation and conserved quantity for the system by proposition 2 are obtained,and the inferences in two special cases are given.Finally,an example is given to illustrate the application of the results.     

Scaling laws of design parameters for plasma wakefield accelerators

Simple scaling laws for the design parameters of plasma wakefield accelerators were obtained using a theoretical model, which were confirmed via particle simulation studies. It was found that the acceleration length was given by Δx=0.804λp/(1−βg), where λp is the plasma wavelength and βgc the propagation velocity of the ion cavity. The acceleration energy can also be given by ΔE=(γm−1)mc²=2.645mc²/(1−βg), where m is the electron rest mass. As expected, the acceleration length and energy increase drastically as βg approached unity. These simple scaling laws can be very instrumental in the design of better-performing plasma wakefield accelerators.     

Defect modes tuning of one-dimensional photonic crystals with lithium niobate and silver material defect

In this paper, a novel PCs defect mode is designed by inserting a Ag/LiNbO₃/Ag sandwich structure into periodically stacked TiO₂/MgF₂ dielectric superlattice. The band gap calculation is conducted using transfer matrix method. An emergence of defect mode around 525 nm is demonstrated. By applying an external voltage on this defect mode, remarkable wavelength tuning can be achieved. At normal incidence, a tuning bandwidth up to 70 nm is obtained by moderate change of external voltage from −250 to 250 V. This feature can be employed to fabricate practical tunable filters in visible region.