铈基催化剂催化氧化燃煤烟气中汞的实验及机理研究

采用超声波增强的浸渍法合成了CeO₂-TiO₂催化剂,并采用BET,XRD,XPS等分析手段对催化剂进行了表征。利用固定床反应器,在模拟燃煤烟气条件下研究了CeO₂-TiO₂催化剂对单质汞的催化氧化行为及机理。结果表明:CeO₂-TiO₂催化剂在低温范围（150～250°）具有很强的催化氧化汞的能力;最佳的CeO₂/TiO₂质量比在1.5左右,此时汞的氧化效率可高达90%以上;P25,Evonik TiO₂比锐钛矿TiO₂更适合做铈基催化剂载体;CeO₂-TiO₂催化剂上汞的催化氧化符合Langmuir-Hinshelwood机理,即吸附态的汞与其邻近的活性物质反应生成氧化态汞。     

Asymmetric Synthesis. VII. Double Stereodifferentiation in Allylation of Ketimines Bearing Two Chiral Auxiliaries. Application to Enantioselective Synthesis of α-Allylglycine

A double asymmetric induction has been observed in allylation of the imines derived from (+)-camphor, (+)- and (-)- 2-hydroxypinan-3-ones with (+)- and (-)-menthyl glycinates. After hydrolysis of the allylated intermediates, (R)- and (S)-α-allylglycines are obtained in 3–90% optical yields.     

Research on Lateral Vibration Coupling Mechanism of a High-Speed Train Based on Singular Coefficients

Russian Physics Journal - The lateral vibration coupling mechanism is the basic law describing the current vibration behavior of a high-speed train. The main reason is that there are design defects...     

MOF-808/Bi2MoO6复合材料的构筑及其光催化性能

采用简单的两步水热法制备出了锆基金属有机骨架和钼酸铋的复合材料MOF-808/Bi₂MoO₆。通过X射线粉末衍射、傅里叶红外光谱、扫描电子显微镜、透射电子显微镜、X射线光电子能谱、紫外可见漫反射光谱、N₂吸附-脱附测试和电化学测试对所制备材料的组成、微观结构、光学性质以及光生载流子的复合效率进行了分析。与纯Bi₂MoO₆和MOF-808相比,0.5%-MOF-808/Bi₂MoO₆复合材料展示出了较高的光催化活性,在可见光照射120 min时对抗生素环丙沙星(CIP)的降解率达89.7%。通过自由基捕获实验,证明了·O₂^-是主要活性物种,基于此我们提出了可能的光催化降解机理。     

An on‐line sample pretreatment technique for the HPLC analysis of plant samples

A continuous‐flow, on‐line sample pretreatment technique using a silica gel microsyringe extractor has been developed. All steps including extraction, separation, clean‐up, and concentration occur in the microsyringe. The overall sample pretreatment process takes <10 min per sample. Different polarity chemicals in the plant sample are successively extracted and separated, and analyzed in parallel using HPLC–UV and HPLC–UV–MS/MS. Polycyclic aromatic hydrocarbons, alkylphenols, and plant hormones were determined as model compounds for nonpolar, intermediate polarity, and polar fractions, respectively. All the parameters that influence the extraction and separation efficiency of the microsyringe extractor have been optimized and evaluated. Under the optimized conditions, recoveries of target compounds ranged from 78.4 to 101.9%, the RSD was <12.8% and the square of the correlation coefficient was >0.99. Complex plant samples of Sambucus Mandshurica Kitag have been tested using this method. Fluorene, phenanthrene, pyrene, and plant hormones were detected in all the samples, and concentrations ranged from 24.2–34.9, 43.8–67.1, 25.9–29.2, and 14.5～110.8 ng/g, respectively.     

Application of XPS imaging analysis in understanding interfacial delamination and X‐ray radiation degradation of PMMA

The recent development of X‐ray Photoelectron Spectroscopy (XPS) instrumentation with spatial resolution down to several microns has advanced the capability of elemental and chemical state imaging. XPS imaging analysis has been applied in understanding the delamination problems of siloxane coatings on polymethyl‐methacrylate (PMMA) polymer. It was found that delamination occurred by interfacial failure, and the coating suffered complete delamination from a PMMA substrate. This example offered an opportunity for the investigation of X‐ray damage on polymers encountered in XPS imaging analysis. This paper also demonstrated how to construct a constrained peak model with the aid of chemical knowledge and supporting evidence of the sample. Monte Carlo error analysis was used to determine the validity of the peak fit models used. Copyright © 2013 John Wiley & Sons, Ltd.     

Computational studies on two novel energetic nitrogen‐rich compounds based on tetrazolone

Two novel energetic nitrogen‐rich compounds 1,4‐diaminotetrazol‐5‐one ( DATO ) and 1,4‐dinitrotetrazol‐5‐one ( DNTO ) were proposed first and studied by quantum chemistry method with B3LYP/6‐31G* level of theory. The optimized geometry, IR predicted spectrum and thermochemical parameters, frontier molecular orbitals and molecular electrostatic potential were calculated for inspecting the electronic structure, molecular stability and chemical reactivity. The important macroscopic properties including density, enthalpy of formation, detonation parameters and impact sensitivity have been predicted as well. As a result, two designed compounds DATO and DNTO possess positive enthalpy of formation (395.79 and 342.77 kJ/mol), impressive detonation parameters (D = 8.80 km/s, P = 33.69 GPa; D = 8.89 km/s, P = 34.98 GPa) superior to the remarkable explosive RDX, acceptable sensitivities and might be promising candidates of energetic materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Electrical actuation of dielectric droplets by negative liquid dielectrophoresis

This paper presents an electrical actuation scheme of dielectric droplet by negative liquid dielectrophoresis. A general model of lumped parameter electromechanics for evaluating the electromechanical force acting on the droplets is established. The model reveals the influence of actuation voltage, device geometry, and dielectric parameter on the actuation force for both conductive and dielectric medium. Using this model, we compare the actuation forces for four liquid combinations in the parallel-plate geometry and predict the low voltage actuation of dielectric droplets by negative dielectrophoresis. Parallel experimental results demonstrate such electric actuation of dielectric droplets, including droplet transport, splitting, merging, and dispending. All these dielectric droplet manipulations are achieved at voltages < 100 V_rms. The frequency dependence of droplet actuation velocity in aqueous solution is discussed and the existence of surfactant molecules is believed to play an important role by realigning with the AC electric field. Finally, we present coplanar manipulation of oil and water droplets and formation of oil-in-water emulsion droplet by applying the same low voltage.