互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Speciation analysis of aluminium(III) in natural waters and biological fluids by complexing with various catechols followed by differential pulse voltammetry detection

The biological effects of aluminium have received much attention in recent years. Speciation of Al is of basic relevance as it concerns its reactivity and bioavailability. A differential pulse voltammetry (DPV) procedure is proposed for speciation analysis of Al(III) in natural waters and biological fluids using six catechols (L-dopa, dopamine, epinephrine, norepinephrine, caffeic acid and o-benzenediol) as electroactive ligands. The decrease of the DPV anodic peak current for each catechol ligand is linear with the increase of Al concentration. This speciation analysis idea is based on the measurement of the complexation capacity, namely, different affinities of Al(III) for catechols and organic ligands under two pH conditions. The labile monomeric Al fraction (mainly inorganic aluminium) is determined at pH 4.6, while the total monomeric Al fraction is determined at pH 8.5. The principle for Al(III) speciation analysis by an electrochemical method is discussed. This sensitive and simple fractionation method is successfully applied to the speciation analysis of Al in natural waters and the results agree well with those of Driscoll's method. The speciation analysis of Al in biological fluids is also explored and the results are compared with those obtained by ultrafiltration and dialysis. Compared with other speciation protocols the electrochemical method possesses some remarkable advantages: rapidity, high sensitivity, cheap instrumentation and a simple operation procedure.     

Hypericin-Induced Phototoxicity in Cultured Fibroblasts and Swine Erythrocytes

Hypericin is a naturally occurring photosensitizer, whose presence in plants has been responsible for cutaneous phototoxicity in grazing animals. The photosensitizing properties of this agent have recently been exploited in models for anti-tumor and anti-viral activity. The cytotoxicity of hypericin and light was assessed in 3T3 mouse fibroblasts using the MTT [3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide)] assay and the lactate dehydrogenase (LDH) leakage assay. Membrane damage was assessed in swine erythrocytes using hemolysis, potassium (K⁺) leakage and formation of lipid hydroperoxides. Concentration- and light-dependent decreases in fibroblast viability were seen starting at hypericin concentrations of 1.25 μM and light power flux levels of 24 J/cm² using a visible light source and at 0.417 μM hypericin and a similar light dose using a solar simulator, No LDH leakage was observed at hypericin concentrations up to 30 μM and visible light up to 144 J/cm². Light-and/or concentration-dependent increases in hemolysis, K⁺ leakage and formation of lipid hydroperoxides in red blood cell (RBC) membranes were observed, but at concentrations and light doses much greater than those required to induce cytotoxicity in fibroblasts. Lipid peroxidation and hemolysis occurred at 15 μM hypericin and 24 J/cm² (visible light source). Potassium ion leakage occurred at concentrations and light levels as low as 5 μM and 12 J/cm² or 15 μM and 4.8 J/cm² (visible light source) but was still a less sensitive indicator than fibroblast cytotoxicity. Evidence for both type I and type II reactions was shown in RBC membranes by TLC analysis of cholesterol products. In the absence of light, hypericin appears to be relatively nontoxic in the models tested.     

K3Na5(H2NCH2CH2NH3)2{(VO)12O6[B3O6(OH)]6}(H2O)•12H2O的合成与晶体结构

利用水热合成技术成功制备出一种新型多钒硼氧化合物， 用X射线单晶衍射分析技术对其晶体结构和分子结构进行了确定。结果表明在该化合物中多钒硼氧阴离子具有一个新颖的三明治结构。上下两个结构单元都是由六个VO₅四角锥交替地通过顺式和反式共边的方式连接起来构成的一个钒氧三角形结构。中间的结构单元是由BO₃平面三角形和BO₄四面体以共角的方式相互连接形成的一个折叠型的B₁₈O₃₆(OH)₆环。三明治结构中层与层之间通过桥氧相连。一个水分子处于它的核心位置上，与每个VO₅四角锥中的钒原子都保持几乎相等的距离。该化合物及其晶体中存在着丰富的化学结构和成键信息，同时也有作为氧化还原反应催化剂的潜能。     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

新型含氟聚芳醚酮的合成与表征

聚芳醚酮具有很高的热稳定性和优良的电性能及机械性能 ,已经被广泛应用于宇航、电子及核能等高技术领域 [1] .氟元素的引入可以降低材料介电常数、折光指数和吸水率 ,提高热稳定性、溶解性和阻燃性 ,增加材料透明度 ,使这类聚合物在光电子、光学和微电子等应用领域的研究倍受关注 [2～ 4 ] .本文在合成含三氟甲基苯侧基的聚芳醚酮 [5] 的基础上 ,设计并合成了新型的含氟量更高的单体和聚合物 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 [3,5 -二 (三氟甲基 ) ]苯代对苯醌 (自制 ) ;锌粉 ,A.R.级 ,天津化学试剂一厂产品 ;…     

应变速率和电位对应力腐蚀裂纹扩展的影响

以滑移-溶解-再钝化模型为基础,推导出应力腐蚀裂纹扩展速率与裂尖应变速率和电位之间的理论公式.计算表明,在裂纹扩展速率与裂尖应变速率的关系曲线中有两个特征区域.裂纹扩展速率在区域I随裂尖应变速率增加而增大,而在区域II不随裂尖应变速率的改变而变化.用慢应变速率拉伸技术（SSRT）测量了304L不锈钢的裂纹增长速率.当电位控制在区域II的阳极区时,理论计算的裂纹扩展速率与实验得到的结果比较吻合.     

Remarkable nanosize effect of zirconia in Au/ZrO2 catalyst for CO oxidation

Nanosize effect of ZrO2 in Au/ZrO2 catalyst was studied by deposition-precipitation of Au nanoparticles in similar sizes (4-5 nm) on ZrO2 nanoparticles of varying sizes. The catalysts were characterized with XRD, TEM, XPS, and nitrogen adsorption to understand the effect of ZrO2 particle size on the catalytic nanostructures. Nanocomposite Au/ZrO2 catalysts consisting of comparably sized Au-metal (4-5 nm) and ZrO2 (5-15 nm) nanoparticles are found advantageous over those containing similarly sized Au-metal but larger ZrO2 (40-200 nm) particles for CO oxidation. This finding may have important implications on the designed preparation of advanced nanostructured catalysts and other chemical materials.     

Synthesis and biological activity of novel epothilone aziridines

[reaction: see text]. A series of 12alpha,13alpha-aziridinyl epothilone derivatives were synthesized in an efficient manner from epothilone A. The final semisynthetic route involves a formal double-inversion of stereochemistry at both the C12 and C13 positions. All aziridine analogues were tested for effects on tubulin binding polymerization and cytotoxicity. The results indicate that the aziridine moiety is a viable isosteric replacement for the epoxide in the case of epothilones.     

The Intelligent Properties of Micro－reactors for Preparating Nanoparticles

TiO2 nanoparticles were synthesized by using micro-reactors. The shape and size of the nanoparticles produced from the original micro-reactors and the five times recycled micro-reactorsmother liquor were investigated on transmission electron microscopy (TEM) by using the original sample, freeze prepared sample, and dyeing treated sample, respectively. UV-VIS spectrometry was used to study the growth process of TiO2 nanoparticles in main reactors. The results showed that micro-reactors with nanometer magnitude had spherical or oval structures, and could restore to their original structure after they were destroyed. The products prepared in the original micro-reactors were similar to that in the micro-reactors recycled for many times, suggesting that the micro-reactors had memory function.