The mechanism of thermal decomposition of Co(NO3)2 · 2H2O

The mechanism of thermal decomposition of Co(NO₃)₂ · 2H₂O was found to involve stages in which Co(NO₃)₃ and Co₂O₃ · H₂O are formed both of which decompose to Co₃O₄. During the process, the total cobalt enters the +3 oxidation state, which is consistent with the results reported by Mehandjiev [2].

---

Zusammenfassung Es wurde gefunden, daß der Zersetzungsmechanismus von Co(NO₃)₂ · 2H₂O Schritte umfaßt, bei denen Co(NO₃)₃ sowie Co₂O₃ · H₂O gebildet werden, beides weiterzerfallend zu Co₃O₄. Während des Vorganges erreicht das Gesamtkobalt die Oxidationsstufe +3, was mit Ergebnissen von Mehandjiev übereinstimmt [2].

---

, , CO₃O₄. , .

     

Xanthine Sensors Based on Anodic and Cathodic Detection of Enzymatically Generated Hydrogen Peroxide

A xanthine biosensor was fabricated by the covalent immobilization of xanthine oxidase (XO) onto a functionalized conducting polymer (Poly‐5, 2′: 5′, 2″‐terthiophine‐3‐carboxylic acid), poly‐TTCA through the formation of amide bond between carboxylic acid groups of poly‐TTCA and amine groups of enzyme. The immobilization of XO onto the conducting polymer (XO/poly‐TTCA) was characterized using cyclic voltammetry, quartz crystal microbalance (QCM), and X‐ray photoelectron spectroscopy (XPS) techniques. The direct electron transfer of the immobilized XO at poly‐TTCA was found to be quasireversible and the electron transfer rate constant was determined to be 0.73 s^?1. The biosensor efficiently detected xanthine through oxidation at +0.35 V and reduction at ?0.25 V (versus Ag/AgCl) of enzymatically generated hydrogen peroxide. Various experimental parameters, such as pH, temperature, and applied potential were optimized. The linear dynamic ranges of anodic and cathodic detections of xanthine were between 5.0×10^?6?1.0×10^?4 M and 5.0×10^?7 to 1.0×10^?4 M, respectively. The detection limits were determined to be of 1.0×10^?6 M and 9.0×10^?8 M with anodic and cathodic processes, respectively. The applicability of the biosensor was tested by detecting xanthine in blood serum and urine real samples.     

catena‐Poly[[[pyridinecopper(II)]bis[μ3‐4‐(2‐oxidobenzylideneamino)benzoato]] dimethylformamide disolvate], a polymer composed of dimeric dicopper building units

The title compound, {[Cu(C₁₄H₉NO₃)(C₅H₅N)]·C₃H₇NO}_n or {[Cu₂L₂(py)₂]·2DMF}_n [py is pyridine, L is 4‐(salicylideneamino)benzoate and DMF is dimethylformamide], is composed of dimeric dicopper [CuL(py)]₂ building units, which are interlinked into a one‐dimensional chain through the formation of Cu—O_COO bonds. The dimeric unit is centrosymmetric, containing two Cu^II atoms linked by bridging phenolate O atoms into a Cu₂O₂ plane with a chelating Cu—O bond length of 1.927 (2) Å and a bridging Cu—O bond length of 2.440 (2) Å. Interchain C—H...O and π–π stacking interactions are responsible for an extensive three‐dimensional structure in which the resulting channels are filled by DMF solvent molecules.     

Thermotropic Liquid Crystals Based on Extended 2,5‐Disubstituted‐1,3,4‐Oxadiazoles: Structure–Property Relationships,Variable‐Temperature Powder X‐ray Diffraction,and Small‐Angle X‐ray Scattering Studies

A class of extended 2,5‐disubstituted‐1,3,4‐oxadiazoles R¹‐C₆H₄‐{OC₂N₂}‐C₆H₄‐R² (R¹=R²=C₁₀H₂₁O 1 a , p‐C₁₀H₂₁O‐C₆H₄‐C?C 3 a , p‐CH₃O‐C₆H₄‐C?C 3 b ; R¹=C₁₀H₂₁O, R²=CH₃O 1 b , (CH₃)₂N 1 c ; F 1 d ; R¹=C₁₀H₂₁O‐C₆H₄‐C?C, R²=C₁₀H₂₁O 2 a , CH₃O 2 b , (CH₃)₂N 2 c , F 2 d ) were prepared, and their liquid‐crystalline properties were examined. In CH₂Cl₂ solution, these compounds displayed a room‐temperature emission with λ_max at 340–471 nm and quantum yields of 0.73–0.97. Compounds 1 d , 2 a – 2 d , and 3 a exhibited various thermotropic mesophases (monotropic, enantiotropic nematic/smectic), which were examined by polarized‐light optical microscopy and differential scanning calorimetry. Structure determination by a direct‐space approach using simulated annealing or parallel tempering of the powder X‐ray diffraction data revealed distinctive crystal‐packing arrangements for mesogenic molecules 2 b and 3 a , leading to different nematic mesophase behavior, with 2 b being monotropic and 3 a enantiotropic in the narrow temperature range of 200–210 °C. The structural transitions associated with these crystalline solids and their mesophases were studied by variable‐temperature X‐ray diffractometry. Nondestructive phase transitions (crystal‐to‐crystal, crystal‐to‐mesophase, mesophase‐to‐liquid) were observed in the diffractograms of 1 b, 1 d , 2 b, 2 d , and 3 a measured at 25–200 °C. Powder X‐ray diffraction and small‐angle X‐ray scattering data revealed that the structure of the annealed solid residue 2 b reverted to its original crystal/molecular packing when the isotropic liquid was cooled to room temperature. Structure–property relationships within these mesomorphic solids are discussed in the context of their molecular structures and intermolecular interactions.     

A Selective Cholesterol Biosensor Based on Composite Film Modified Electrode for Amperometric Detection

An amperometric cholesterol biosensor based on immobilization of cholesterol oxidase in a Prussian blue (PB)/polypyrrole (PPy) composite film on the surface of a glassy carbon electrode was fabricated. Hydrogen peroxide produced by the enzymatic reaction was catalytically reduced on the PB film electrode at 0 V with a sensitivity of 39 μA (mol/L)^?1. Cholesterol in the concentration range of 10^?5 ? 10^?4 mol/L was determined with a detection limit of 6 × 10^?7 mol/L by amperometric method. Normal coexisting compounds in the bio‐samples such as ascorbic acid and uric acid do not interfere with the determination. The excellent properties of the sensor in sensitivity and selectivity are attributed to the PB/PPy layer modified on the sensor.     

A novel three‐dimensional cadmium(II) coordination polymer incorporating 1,4‐bis­(1,2,4‐triazol‐1‐ylmethyl)­benzene and thio­cyanate

In the title complex, poly[cadmium(II)‐μ₂‐1,4‐bis­(1,2,4‐triazol‐1‐ylmeth­yl)benzene‐di‐μ₂‐thio­cyanato], [Cd(NCS)₂(C₁₂H₁₂N₆)]_n, the Cd^II atom lies on an inversion centre in a distorted octa­hedral environment. Four N atoms from the thio­cyanate and 1,4‐bis­(1,2,4‐triazol‐1‐ylmeth­yl)benzene (bbtz) ligands occupy the equatorial positions, and two S atoms from symmetry‐related thio­cyanate ligands occupy the axial positions. The benzene ring of the bbtz ligand lies about an inversion centre. Single thio­cyanate bridges link the Cd^II atoms into two‐dimensional sheets containing novel 16‐membered [Cd₄(μ‐NCS‐N:S)₄] rings. The bbtz ligands further link these two‐dimensional sheets into an unprecedented covalent three‐dimensional network for the cadmium–thio­cyanate system.     

Synthesis of bicyclic pyrimidine derivatives as ATP analogues

A highly efficient and general solid-phase synthesis of bicyclic pyrimidine derivatives that target purine dependent proteins is reported. The synthesis of the key intermediate, 4,6-disubstituted-5-amino-pyrimidine, involved reduction of the corresponding nitro derivatives using 1,1'-dioctyl-viologen in a triphasic milieu. The mild reduction conditions enable the use of any acid labile solid support as well as a wide range of combinatorial substituents, thus enabling the synthesis of large libraries of highly diverse bicyclic pyrimidines. Alternative reduction conditions with tin(II) chloride and structure-reactivity studies are discussed as well.     

Rapid separation and laser-induced fluorescence detection of mutated DNA by capillary electrophoresis in a self-coating, low-viscosity polymer matrix

The detection of point and other simple mutations in DNA is important for cancer research and diagnosis and other biological studies. Capillary electrophoresis has been successfully used for separating DNA fragments. However, a low-viscosity polymer sieving buffer for DNA separation with on-line coating has never been reported. In this paper, a new method using capillary electrophoresis with on-line coating and laser-induced fluorescence detection (CE-LIF) for screening for point or simple DNA mutations has been demonstrated. The method uses an on-line dynamic coating technique that increases capillary lifetime and analysis reproducibility, and employs a low-viscosity polymer solution, which allows the user to rinse the capillary rapidly and refill with polymer solution easily. Experiments proved that the additives in the separation buffer for on-line capillary coating do not affect the separation efficiency of the running buffer, and do not interfere with the formation of hydrogen-bonded network between boric acid, mannitol and hydroxypropylmethylcellulose polymers. The stability of the dynamically coated capillary was quantitatively studied; the capillary lifetime was increased 6- to 7-fold compared with that of permanently coated CE columns. Standard DNA fragments containing mutations, with sizes of 209, 219, and 338 bps, were successfully separated and detected with this system, after the mutated DNA fragments were cleaved by CEL-I endonuclease. The technique is very sensitive for the size-separation of low-range, middle-range, and high-range DNA fragments. Results were compared with the HPLC methods developed by Transgenomic, Inc. and were in good agreement. The method should be applicable to mutation detection for all relevant biological and clinical studies. The factors influencing separations and the stability of dynamic capillary coatings are also discussed in the paper.     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129