Synthesis of saccharidic polymer colloids via free radical mini‐emulsion polymerization

Polymer colloids based on 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and butyl acrylate (BA) were prepared via free radical mini‐emulsion polymerization. The kinetic and colloidal features of the copolymerization were investigated. The final particle size (D) of the sugar latexes is inversely proportional to the concentration of the anionic emulsifier (sodium dodecyl sulphate, SDS) and the non‐ionic one (alkyl polyglucoside, APG). It was also found that D is independent of the concentration of either the water‐soluble initiator (potassium persulfate, KPS), or the oil‐soluble initiator (2,2′‐azobisisobutyronitrile, AIBN). The rate of mini‐emulsion polymerization is lower in comparison with the conventional emulsion polymerization under the same conditions. The polymerization rate (R_p) and the total number of particles (N_p) are proportional to the 0.72th and 0.93th power of the SDS, and to the 1.40th and 2.22th of the APG concentration. Following reaction orders, 0.79/0.06 were obtained for R_p/N_p versus the concentration of KPS, and 0.22/?0.01 for AIBN, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

(ClAlNH)n簇合物的结构与稳定性

用量子化学从头算方法（HF／6－31G）和密度泛函理论（DFT）的B3LYP方法，以6－31G标准基组加一个极化函数，对（ClAlNH)n(n=1-10)簇合物的几何构型，电子结构和红外光谱进行了优化，并讨论了聚合反应（ClAlNH)m→(ClAlNH)n的热力学效应，结果表明，（ClAlNH)n系列簇合物的基态稳定结构为Cs(n=1),D2h(n=2),D3h(n=3),Td(n=4),Cs(n=5),D3d(n=6),Cs(n=7),S4(n=8),D3h(n=9),C2h(n=10,n=2,4,6,8,10等偶数对应的（ClAlNH)n簇化合物的结构比n等于奇数量更稳定。     

五氯化磷辅助下氨基酸的自组装成肽反应研究

L-α-氨基酸和D-α-氨基酸可与五氯化磷直接发生磷酰化反应，随后自组装成多肽，但β-氨基酸不能成肽，DL-α-氨基酸成肽困难；在SOCl2存在下，α-氨基酸也不能成肽，用电喷雾质谱研究了氨基酸的自组装反应，反应过程中有五元环状的氨基酸五配位磷中间体生成，使用硅烷基保护的氨基酸，在^31PNMR中可观察到五配位磷中间体。     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

4-乙酰基-2-硝基苯甲醛的简便合成

从4-乙酰基-2-硝基甲苯出发, 经溴化、羟化、氧化以88.5%的总收率制备得到4-乙酰基-2-硝基苯甲醛.     

α-乙酰基二硫缩烯酮α碳原子的酰化反应

进行了α-乙酰基二硫缩烯酮与酰氯的酰化反应. 以干燥的二氯甲烷为溶剂, 在四氯化钛催化下, α-乙酰基环二硫缩烯酮(1)可与脂肪及芳酰氯(2)反应, 在化合物1的α-碳原子上发生酰化反应, 以较高的产率生成各种α-乙酰基-α-酰基二硫缩烯酮(3).     

Quecksilber(II)‐chlorid‐ und ‐iodid‐Komplexe von Dithia‐ und Tetrathiakronenethern

Mercury(II) Chloride and Iodide Complexes of Dithia‐ and Tetrathiacrown Ethers The complexes [(HgCl₂)₂((ch)₂30S₄O₆)] ( 1 ), [HgCl₂(mn21S₂O₅)] ( 2 ), [HgCl₂(ch18S₂O₄)] ( 3 ) and [HgI(meb12S₂O₂)]₂[Hg₂I₆] ( 4 ) have been synthesized, characterized and their crystal structures were determined. In [(HgCl₂)₂((ch)₂30S₄O₆)] two HgCl₂ units are discretely bonded within the ligand cavity of the 30‐membered dichinoxaline‐tetrathia‐30‐crown‐10 ((ch)₂30S₄O₆) forming a binuclear complex. HgCl₂ forms 1 : 1 “in‐cavity” complexes with the 21‐membered maleonitrile‐dithia‐21‐crown‐7 (mn21S₂O₅) ligand and the 18‐membered chinoxaline‐dithia‐18‐crown‐6 (ch18S₂O₄) ligand, respectively. The 12‐membered 4‐methyl‐benzo‐dithia‐12‐crown‐4 (meb12S₂O₂) ligand gave with two equivalents HgI₂ the compound [HgI(meb12S₂O₂)]₂[Hg₂I₆]. In the cation [HgI(meb12S₂O₂)]⁺ meb12S₂O₂ forms with the cation HgI⁺ a half‐sandwich complex.     

Silicomolybdate‐Doped PEDOT Modified Electrode: Electrocatalytic Reduction of Bromate and Oxidation of Ascorbic Acid

Electrically conducting poly(3,4‐ethylenedioxythiophene) (PEDOT) film doped with silicomolybdate (SiMo₁₂O₄₀^4? or SiMo₁₂) was synthesized by electrochemical polymerization. The synthesized film is capable of fast charge propagation during redox reactions in strong acid medium 0.2 M H₂SO₄ solution. The modified electrode was used towards reduction of bromate and successfully employed as an amperometric sensor for bromate and also above modified electrode was investigated for ascorbic acid oxidation.     

A Rapid and Convenient Synthesis of Derivatives of Imidazoles under Microwave Irradiation

An efficient and a quick microwave‐assisted synthesis of benzimidazoles and trisubstituted imidazoles was developed. Three benzimidazoles were obtained as a result of the condensation of 1,2‐phenylenediamine with carboxylic acids and acetoacetic ester without catalyst. A series of trisubstituted imidazoles were synthesized by condensation of benzil, aromatic aldehyde and ammonium acetate in the presence of glacial acetic acid.