Monolayers as models for supported catalysts: zirconium phosphonate films containing manganese(III) porphyrins

Organized monolayer films of a manganese tetraphenylporphyrin have been prepared and used as supported oxidation catalysts. Manganese 5,10,15,20-tetrakis(tetrafluorophenyl-4'-octadecyloxyphosphonic acid) porphyrin (1) has been immobilized as a monolayer film by a combination of Langmuir-Blodgett (LB) and self-assembled monolayer techniques that use zirconium phosphonate linkages to bind the molecule to the surface. Analysis by FTIR, XPS, UV-vis and polarized optical spectroscopy show that the films consist of noninteracting molecules effectively anchored and oriented nearly parallel to the surface. The monolayer films are stable to the solvent and temperature conditions needed to explore organic oxidations. The activity of films of 1 toward the epoxidation of cyclooctene using iodosylbenzene as the oxidant was compared to that of Manganese 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin (2) and 1 under equivalent homogeneous conditions. The immobilized porphyrin 1 shows an enhanced activity relative to either homogeneous reaction. The main difference between 1 and 2 is the four alkyl phosphonate arms in 1 designed to incorporate the porphyrin within the films. The increased activity of immobilized 1 is a combination of the porphyrin structure, which prohibits the formation of mu-oxo dimers even in solution, and a change in conformation when anchored to the surface. The study demonstrates that careful monolayer studies can provide useful models for the design and study of supported molecular catalyst systems.     

Rapid biomass analysis

New, rapid, and inexpensive methods that monitor the chemical composition of corn stover and corn stover-derived samples are a key element to enabling the commercialization of processes that convert stover to fuels and chemicals. These new techniques combine near infrared (NIR) spectroscopy and projection to latent structures (PLS) multivariate analysis to allow the compositional analysis of hundreds of samples in 1 d at a cost of about $10 each. The new NIR/PLS rapid analysis methods can also be used to support a variety of research projects that would have been too costly to pursue by traditional methods.     

Use of solid-phase microextraction-capillary-gas chromatography (SPME-CGC) for the varietal characterization of wines by means of chemometrical methods

The extraction of wine aroma compounds was studied by direct-SPME (DI/SPME), headspace-SPME (HS/SPME) and multiple-headspace-extraction-SPME (MHE/SPME). The aromagrams obtained by HS/SPME-CGC were evaluated with chemometrical methods for the varietal classification of wines. Received: 25 July 1997 / Revised: 24 September 1997 / Accepted: 7 October 1997     

The synthesis of dicationic extended bis-benzimidazoles

The synthesis of extended dicationic bis-benzimidazoles starting from trans-1,2-bis(4-cyanophenyl)ethene and trans-1,2-bis(4-cyanophenyl)cyclopropane is reported. The target diamidines show significant in vitro activity against B. subtilis.     

The preparation of 2,6-diaminopyrazine, 2,6-diazidopyrazine and some of their derivatives

A much improved synthesis of the heretofore difficultly obtainable 2,6-diaminopyrazine (4) was afforded by the low-pressure catalytic hydrogenation (palladium on carbon) of 2,6-diazido-pyrazine (2) ; reaction of 2,6-dichloropyrazine (1) and sodium azide gave 2 in 84% yield. The outcome of the reduction was found to be solvent dependent: 1,2-dimethoxyethane containing aqueous ammonia gave 4 in 83% yield; 1,2-dimethoxyethane alone gave 5-aminotetrazolo[1,5-a]-pyrazine (3) in 26% yield. Additional alternative syntheses of 3 and 4 are described. A number of acyl and azo derivatives of 4 were prepared. Reactions of 2 with dimethyl acetylenedicarboxylate and ethyl acetate (base catalyzed) leading to vic-triazole derivatives are also described.     

Electron microscopic phase analysis of BN-thin films

A series of BN films was deposited by means of r.f. magnetron sputtering of a h-BN target onto Si(1OO) surfaces. Hereby, the substrate bias voltage was varied. Special interest is focussed to the influence of the deposition parameters on the orientation of the growing hexagonal BN film with respect to the substrate. For structural investigation, cross section samples were prepared. In addition to HRTEM and diffraction investigations, especially electron energy loss spectroscopy (EELS) was applied successfully for phase identification. For negative bias voltages of U _B =–300 V and U _B =–350V, we found a phase system consisting of a first-grown 25 nm thick layer of hexagonal structure with the c axis parallel to the substrate surface followed by the cubic phase.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Role of the spacer in the singlet-singlet energy transfer mechanism (Förster vs Dexter) in cofacial bisporphyrins

The cofacial bisporphyrins H4DPS (DPS = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzothiophene), H4DPO (DPO = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzofuran), H4DPX (DPX = 4,5-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]-9,9-dimethylxanthene), H4DPA (DPA = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]anthracene), and H4DPB (DPB = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]biphenylene) have been monometalated by Zn(OAc)2.2H2O and by GaCl3 to explore the singlet-singlet energy transfer from the photoexcited metal porphyrin center to the linked free base porphyrin. The spectroscopic (UV-vis and fluorescence) and photophysical properties (fluorescence lifetimes, tauF, and quantum yields, phiF) have been investigated at 298 and 77 K in degassed 2-MeTHF for the donor-acceptor systems, (Zn)H2DPS, (Zn)H2DPO, (Zn)H2DPA, (Zn)H2DPX, and (Zn)H2DPB, as well as for the bis-zinc complexes, (Zn)2DPS, (Zn)2DPO, (Zn)2DPX, and (Zn)2DPB, respectively, and the monoporphyrin derivatives, H2P, (Zn)P, and (Ga-OMe)P (P2- = 5-phenyl-2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrin-dianion). The singlet-singlet energy transfer rate constants (KET) were obtained using KET = (1/tauF -1/tauFo), where tauFo is the fluorescence lifetime of the corresponding bis-zinc(II) systems (or (Zn)P and (Ga-OMe)P) where no energy transfer occurs. The tauF value for three bis-zinc(II) compounds varies from 1.69 to 2.01 ns and is 1.84 (at 298 K) and 3.20 ns (at 77 K) for (Ga-OMe)P. In the donor-acceptor bismacrocycles, depending on the spacer and the temperature, the fluorescence lifetimes decrease down to 50-240 ps. The KET values range from approximately 4 to approximately 21 (ns(-1)) and have been analyzed considering both the F?rster and the Dexter mechanisms. Using the C(meso)-C(meso) distance parameters in the calculations, the F?rster and Dexter mechanisms operate for DPS and DPO, and for DPA, DPX, and DPB spacer systems, respectively. The limit distance where one mechanism dominates over the other is estimated to be around 5-6 A.     

Adsorption of Molybdenum on Titania from Aqueous Solutions

The adsorption of Mo from dilute aqueous solutions (10(-3) to 3x10(-2) M) is effected on three samples of titania, two are anatase and the third is P25, which is composed of rutile and anatase. The adsorption isotherms at 298, 318, and 338 K are analyzed using a Langmuir linear equation. The isotherms on P25 showed a distinct inflection point that is reproduced by two linear portions, indicating different adsorption regimes. This adsorption behavior is explained as follows: with low amount adsorbed the adsorption is initiated by protonation of the basic hydroxyls on which the negatively charged MoO(4)(2-')s are adsorbed, and this is accompanied by an increase in the pH of the impregnating solution. At higher adsorption the coordinatively unsaturated Ti(4+) sites participate in the process, leading to a decline in the initial increase in pH. In the case of the two anatase samples the low surface area resulted in poor distribution of adsorption sites; consequently, the distinction between the two modes of adsorption was not entirely clear. The higher adsorption site density in the case of anatase is accompanied by a lower surface coverage, θ, than that for P25. The heat of adsorption, Q, on the three titania samples showed a linear increase with θ, which is represented by the regression equation: -Q=95.77θ-4.25 (R(2)=0.993). Copyright 2001 Academic Press.     

Bestimmung der organischen Bestandteile von Aerosolpartikeln aus Reinluft

Zusammenfassung Das für die Untersuchung der organischen Bestandteile von Reinluft-Aerosolteilchen entwickelte Analysenverfahren beruht auf der Kombination von klassischen Trennmethoden mit Verfahren der Dünnschicht- und der Gas-Chromatographie bzw. der Gas-Chromatographie/Massenspektrometrie. Im Gegensatz zu älteren Verfahren werden alle vorkommenden organischen Verbindungen, soweit sie äther-löslich sind bzw. in eine äther-lösliche Form überführt werden können, erfaßt. Die verfahrensbedingten Substanzverluste sind so gering, daß schon 100 mg Aerosolteilchen ausreichend sind für die Analyse der organischen Bestandteile (bei ca. 10% organischer Substanz). Ein Anwendungsbeispiel für das Analysenverfahren wird gegeben. Best. von Organ. Substanzen in Luft; Chromatographie, Dünnschicht/Chromatographie, Gas/Massenspektrometrie; Aerosolbestandteile in Reinluft.

---

Determination of the organic constituents of aerosol particles from clean air

The method developed for analysing the organic matter of atmospheric particles from clean air is based on the combination of classical separation procedures and thinlayer chromatography together with gas chromatography and gas chromatography/mass spectrometry, respectively. In contrast to methods published earlier, all organic compounds present can be detected (if they are or can be converted to compounds soluble in ether). The loss of organic matter inherent in the analytical procedure is small enough to allow the determination of the organic constituents of 100 mg of aerosol particles (with about 10% organic matter). An example for the application of the analytical method is presented.

     

Formation of disubstituted beta-lactones using bifunctional catalysis

[reaction: see text] Acid chlorides and aromatic aldehydes react in the presence of a stoichiometric amount of a tertiary amine and catalytic amounts of a cinchona alkaloid derivative and a Lewis acid to produce beta-lactones in high diastereo- and enantioselectivity. The sense of the diastereoselectivity depends on the substitution of the acid chloride, with the reactions of aliphatic acid chlorides giving predominantly the trans-isomer and those of alkoxyacetyl chlorides favoring formation of the cis-isomer.