Fabrication by Co-extrusion and electrochemical characterization of micro-tubular hollow fibre solid oxide fuel cells

A phase inversion process was used to co-extrude cerium–gadolinium oxide (Ce_0.9Gd_0.1O_1.95)/NiO–CGO dual-layer hollow fibres (HF), which were then sintered to form, respectively, the electrolyte and high porosity anode precursor of a solid oxide fuel cell (SOFC) with anode inner diameter of 0.8 mm. Graded CGO–lanthanum strontium cobalt ferrite (La_0.6Sr_0.4Fe_0.8Co_0.2O₃) cathode layers were then painted onto the CGO electrolyte to form a micro-tubular HF-SOFC. With a carefully designed anode current collector, this produced maximum power densities of 1186–5864 W m^? 2 at 450–570 °C. High magnification imaging analysis revealed large three-phase boundary regions within the anode, a dense electrolyte layer and clearly highlighted the multiple CGO–LSCF cermet and pure LSCF cathode layers. The performance of the HF-SOFC with a twenty millimetre active length showed no degradation after four thermal cycles between 300 °C and 570 °C.     

Nanoparticle-Coated Silicon Nanowires

The synthesis of silicon nanowires that are densely coated with silicon nanoparticles is reported. These structures were produced in a two-step process, using a method known as hypersonic plasma particle deposition. In the first step, a Ti–Si nanoparticle film was deposited. In the second step the Ti-source was switched off, and nanoparticle-coated nanowires grew under the simultaneous action of Si vapor deposition and bombardment by Si nanoparticles. Total process time, including both steps, equaled 5 min, and resulted in formation of a dense network of randomly oriented nanowires covering1.5 cm² of substrate area. The nanowires are composed of single-crystal Si. The diameters of the nanowires vary over the range 100–800 nm. Each nanowire has a crystalline TiSi₂ catalyst particle, believed to have been solid during nanowire growth, at its tip.     

Synthesis,characterization, and biological activity of some aza‐uracil derivatives

Thiation of 1 by LR gave the corresponding 3,5‐dithioxo derivative 2 and the trimer 3 . Methylation of 1 afforded the S‐methyl derivative 4 . Compound 1 was fused with 6‐bromo‐2‐phenyl‐benzo[1,3‐d]oxazin‐4‐one ( 5 ) and gave 6 . Condensation of 1 with some acid derivatives 7a , 7b , 7c , 7d and/or 8a , 8b , 8c yielded thiadiazolo‐triazine derivatives 9a , 9b , 9c , 9d and 10a , 10b , 10c . Compounds 9a , 9c and 10c were hydrolyzed to furnish 11a , 11b , 11c Acetylation of 14 afforded mono‐ and diacetyl‐derivatives 15 and 16 . Benzoylation of 14 afforded mono‐ and dibezoyl‐derivatives 17 and 18 . 14 with some aromatic aldehydes yielded 9a , 9b , 9c . Reacting 14 with phenyl (iso‐ and/or isothio‐) cyanate gave the urea derivatives 20a , 20b . Thiation of 14 with P₄S₁₀ furnished 21 . The newly synthesized compounds were tested as antimicrobial agents. J. Heterocyclic Chem., (2011)     

Spin squeezing and quantum correlations

We discuss the notion of spin squeezing considering two mutually exclusive classes of spin-s states, namely, oriented and non-oriented states. Our analysis shows that the oriented states are not squeezed while non-oriented states exhibit squeezing. We also present a new scheme for construction of spin-s states using 2s spinors oriented along different axes. Taking the case of s=1, we show that the ‘non-oriented’ nature and hence squeezing arise from the intrinsic quantum correlations that exist among the spinors in the coupled state.     

Triple diffusive mixed convection flow in a duct using convective boundary conditions

The motivation of the current article is to explore a numerical investigation on steady triply diffusive convection in a vertical channel. Heat is exchanged from the external fluid with the plates. The reference temperature is taken as equal and also as different for the external fluid. Solutions in the absence of viscous dissipation and buoyancy forces are also obtained as special cases. General solutions including the effects of viscous dissipation and buoyancy forces are obtained analytically using the method of perturbation. The analytical solutions can be used only if the Brinkman number is small. Hence to know the flow properties for all values of Brinkman number, we resort to numerical solutions. The effects of thermal Grashof number, solutal Grashof number, and the chemical reaction parameter on the flow field are evaluated numerically. The obtained results are validated against previously published results for special case of the problems.     

vic‐Tricarbonyl Compounds of Quinolines: Analogues of Ninhydrin: A Short Review

Derivatives of ninhydrin are extensively used in the field of forensic sciences as important latent fingerprint reagents. Many works have been performed upon their synthesis and reactivity, but there are many spaces to work on the compounds of quinoline‐2,3,4(1H)‐triones—analogues of ninhydrin, in both dimensions: synthesis and reactivity, and according to the best of our knowledge, not a single detailed or short compiled article has been published for these compounds. This review briefly summarizes the chemistry of quinoline‐2,3,4(1H)‐triones.     

Fabrication of magnetite nanoparticles (Fe3O4-NPs) for catalytic pyrolysis of nutshells biomass

The fabrication of nanoparticles has been perused as a topic of critical importance in the present decades. Biosynthesis of nanoparticles employs plants extract instead of harmful chemicals. These plant extracts act as reducing and capping agents which is the most appropriate and eco-friendly method among all the preparative routs. In present study, the magnetite nanoparticles (Fe₃O₄-NPs) were fabricated using rapid, single step and benign biosynthetic rout by reduction of ferric nitrate nonahydrate solution with Ferocactus echidne aqueous extract containing ascorbic acid as a main reducing and capping agent. The structural and morphological properties of prepared iron oxide nanoparticles were investigated by Powder X-ray diffraction and scanning electron microscopy. The size of the synthesized nanoparticles was approximately 15 ± 2 nm as determined by Scherrer equation. The biosynthetically fabricated nanoparticles were employed as catalyst for pyrolysis of nutshells to produce biofuel. Catalytic pyrolysis of biomass yields biofuel as an alternative source of energy and chemical feed stock. Effect of temperature, heating rate, and amount of catalyst were investigated on conversion percentage and product yields. Aniline point, carbon residue, and cetane number of prepared bio-oil were also determined.     

Green Synthesis of CeO2 Nanoparticles from the Abelmoschus esculentus Extract: Evaluation of Antioxidant,Anticancer, Antibacterial,and Wound-Healing Activities

Metal oxide nanoparticles synthesized by the biological method represent the most recent research in nanotechnology. This study reports the rapid and ecofriendly approach for the synthesis of CeO₂ nanoparticles mediated using the Abelmoschus esculentus extract. The medicinal plant extract acts as both a reducing and stabilizing agent. The characterization of CeO₂ NPs was performed by scanning electron microscopy (SEM), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-Vis), and Fourier transform infrared spectroscopy (FTIR). The in vitro cytotoxicity of green synthesized CeO₂ was assessed against cervical cancerous cells (HeLa). The exposure of CeO₂ to HeLa cells at 10–125 µg/mL caused a loss in cellular viability against cervical cancerous cells in a dose-dependent manner. The antibacterial activity of the CeO₂ was assessed against S. aureus and K. pneumonia. A significant improvement in wound-healing progression was observed when cerium oxide nanoparticles were incorporated into the chitosan hydrogel membrane as a wound dressing.