Optimization of Solution Condition for an Effective Electrochemical Reduction of N2O

An effective electrochemical reduction of nitrous oxide (N₂O) is established by controlling solution compositions in this study. N₂O was electrochemically reduced varying solvent composition and supporting electrolytes (K₂SO₄ and Na₂SO₄) concentrations. The differences in reduction current density and solution resistance were analyzed via linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS), respectively, depending on solution conditions. UV‐Vis spectroscopy was adopted to measure the solubility of N₂O. As a result, among the conditions investigated in this study, 300 mM of K₂SO₄ and aqueous based solution were revealed as an optimum condition for the electrochemical N₂O reduction. At 300 mM of K₂SO₄, the highest current density was obtained due to a high conductance of the electrolyte and a moderate solubility of N₂O.     

Synthesis,characterization, and catalytic application of a zinc(II) complex bearing a pyrazole-based ligand

The reaction between ZnCl₂ and N,N-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl]-1-phenylethylamine (bdmppea) affords [(bdmppea)ZnCl₂], whose structure has been determined by X-ray crystallography. The [(bdmppea)ZnEt₂] complex in situ prepared by the reaction between [bdmppea] and ZnEt₂ exhibited high activity toward the polymerization reaction of rac-lactide at room temperature. However, its activity decreased sharply with decreasing temperature. Stereospecificity of this catalyst characterized by heterotacticity (P_r) was determined by homonuclear decoupled NMR spectroscopy, which value was ∼0.58.     

Mesoporous Nickel–Alumina Catalysts for Hydrogen Production by Steam Reforming of Liquefied Natural Gas (LNG)

Recent progress on the mesoporous nickel–alumina catalysts for hydrogen production by steam reforming of liquefied natural gas (LNG) was reported in this review. A number of mesoporous nickel–alumina composite catalysts were prepared by a single-step surfactant-templating method using cationic, anionic, and non-ionic surfactant as structure-directing agents for use in hydrogen production by steam reforming of LNG. For comparison, nickel catalysts supported on mesoporous aluminas were also prepared by an impregnation method. The effect of preparation method and surfactant identity on physicochemical properties and catalytic activities of mesoporous nickel–alumina catalysts in the steam reforming of LNG was investigated. Regardless of preparation method and surfactant identity, nickel oxide species were finely dispersed on the surface of mesoporous nickel–alumina catalysts through the formation of surface nickel aluminate phase. However, nickel dispersion and nickel surface area of mesoporous nickel–alumina catalysts were strongly affected by the preparation method and surfactant identity. It was found that nickel surface area of mesoporous nickel–alumina catalyst served as one of the important factors determining the catalytic performance in hydrogen production by steam reforming of LNG. Among the catalysts tested, a mesoporous nickel–alumina composite catalyst prepared by a single-step non-ionic surfactant-templating method exhibited the best catalytic performance due to its highest nickel surface area.     

Preparation of MoO3/Pt electrodes by electrodeposition for a direct methanol fuel cell

MoO₃/Pt binary catalysts with various Mo/Pt ratios were prepared by an electrodeposition method for use as the anode in a direct methanol fuel cell. Pt was electrodeposited onto indium tin oxide (ITO) substrate, and then MoO₃ was electrodeposited from an Mo-peroxo electrolyte on the top of Pt with different deposition times. The crystallinity of synthesized films was analyzed by X-ray diffraction (XRD), and the oxidation state of both the platinum and molybdenum were determined by X-ray photoelectron spectroscopy (XPS) analyses. Scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM/EDS) was employed to investigate the surface morphology and composition. The catalytic activity and stability for methanol oxidation were measured using cyclic voltammetry and chronoamperometry in a mixture of 0.5 M H₂SO₄ and 0.5 M CH₃OH aqueous solution. Electrocatalytic activity for CO oxidation was also evaluated in a 0.5-M H₂SO₄ solution. The addition of a proper amount of MoO₃ was found to significantly improve both the catalytic activity and stability for methanol oxidation.     

Optimizing Dilute-Acid Pretreatment of Rapeseed Straw for Extraction of Hemicellulose

Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars prior to fermentation. Hydrolysis can be performed enzymatically or with mineral acids. In this study, dilute sulfuric acid was used as a catalyst for the pretreatment of rapeseed straw. The purpose of this study is to optimize the pretreatment process in a 15-mL bomb tube reactor and investigate the effects of the acid concentration, temperature, and reaction time. These parameters influence hemicellulose removal and production of sugars (xylose, glucose, and arabinose) in the hydrolyzate as well as the formation of by-products (furfural, 5-hydroxymethylfurfural, and acetic acid). Statistical analysis was based on a model composition corresponding to a 3³ orthogonal factorial design and employed the response surface methodology to optimize the pretreatment conditions, aiming to attain maximum xylan, mannan, and galactan (XMG) extraction from hemicellulose of rapeseed straw. The obtained optimum conditions were: H₂SO₄ concentration of 1.76% and temperature of 152.6 °C with a reaction time of 21 min. Under these optimal conditions, 85.5% of the total sugar was recovered after acid hydrolysis (78.9% XMG and 6.6% glucan). The hydrolyzate contained 1.60 g/L glucose, 0.61 g/L arabinose, 10.49 g/L xylose, mannose, and galactose, 0.39 g/L cellobiose, 0.94 g/L fructose, 0.02 g/L 1,6-anhydro-glucose, 1.17 g/L formic acid, 2.94 g/L acetic acid, 0.04 g/L levulinic acid, 0.04 g/L 5-hydroxymethylfurfural, and 0.98 g/L furfural.     

Chemical hybridization of imidized waterborne polyurethane with silica particle

Chemical hybrids of imidized waterborne polyurethane (WPU) with silica nanoparticle were synthesized by UV cure. Imide groups were introduced into the hard segment of UV curable WPU by extending the NCO-terminated prepolymers with pyromellitic dianhydride where chemical hybridization by UV cure was made between the acrylate-terminated polyurethane prepolymer and vinyltrimethoxysilane-silica oligomer. It was found that imidization of WPU and imidized WPU-silica hybrids showed remarkably high mechanical and dynamic mechanical properties at room and elevated temperatures as well as thermal stability.     

Interleukin-1beta stimulates matrix metalloproteinase-2 expression via a prostaglandin E2-dependent mechanism in human chondrocytes

IL-1beta is known promote cyclooxygenase-2 (COX- 2) and matrix metalloproteinase-2 (MMP-2) expression. This study focuses on the characterization of the signaling cascade associated with IL-1beta-induced matrix metalloproteinase-2 (MMP-2) regulation in human chondrocytes. The decrease in collagen levels in the conditioned media was prevented by a broad spectrum MMP inhibitor, suggesting that IL-1beta promotes the proteolytic process leading to MMP-2 activation. IL-1beta-related MMP-2 expression was found to be dependent on prostaglandin E2 (PGE2) production. In addition, the induction of COX-2 and MMP-2 was inhibited by the pretreatment of chondrocytes with a SB203580 or Ro 31-8220, indicating the involvement of protein kinase C (PKC) or p38 mitogen-activated protein kinase (MAPK). However, there is no cross-talk between PKC and p38 MAPK in the IL-1beta-induced MMP-2 activation. Taken together, these results demonstrated that IL-1beta induces MMP-2 expression through the PGE2-dependent mechanism in human chondrocytes.     

Ruthenium‐catalyzed formal alkyl group transfer: Synthesis of quinolines from nitroarenes and alkylammonium halides

Nitroarenes are reductively cyclized with an array of tetraalkylammonium halides and trialkylarnmonium chlorides in the presence of a catalytic amount of a ruthenium catalyst along with tin(II) chloride dihydrate at 180° to afford the corresponding quinolines in moderate to good yields. The addition of tin(II) chloride dihydrate is necessary for the effective formation of quinolines and toluene is the solvent of choice. A reaction pathway involving initial reduction of nitroarenes to anilines and conversion of alkylammonium halides to alkylamines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heteroannulation is proposed for this catalytic process.     

Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.     

Tandem time-of-flight mass spectrometer for photodissociation of biopolymer ions generated by matrix-assisted laser desorption ionization (MALDI-TOF-PD-TOF) using a linear-plus-quadratic potential reflectron

A tandem time-of-flight mass spectrometer for the study of photodissociation of biopolymer ions generated by matrix-assisted laser desorption ionization was designed and constructed. A reflectron with linear and quadratic (LPQ) potential components was used. Characteristics of the LPQ reflectron and its utility as the second stage analyzer of the tandem mass spectrometer were investigated. Performance of the instrument was tested by observing photodissociation of [M + H](+) from angiotensin II, a prototype polypeptide. Quality of the photodissociation tandem mass spectrum was almost comparable to that of the post-source decay spectrum. Monoisotopic selection of the parent ion was possible, which was achieved through the ion beam-laser beam synchronization. General theoretical considerations needed for a successful photodissociation of large biopolymer ions are also presented.