Determination of Dextromethorphan and its Metabolite Dextrorphan in Human Hair by Gas Chromatography–Mass Spectrometry

An analytical method has been developed for determination of dextromethorphan (DMP) and dextrorphan (DRP) in human hair by gas chromatography–mass spectrometry (GC–MS). Hair samples (30 mg) were washed with distilled water and acetone and cut into small fragments (<1 mm) before extraction with methanol. The extracts were evaporated to dryness and then derivatized by use of BSTFA containing 1% TMCS, for preparation of the trimethylsilyl (TMS) derivative of DRP. The extract (1 μL) was then injected into the GC–MS. Recoveries of DMP and DRP at 7.0 and 22.5 ng mg^?1 were in the range 90.6–97.2% with intra-assay and inter-assay precision of less than 5.7% and 4.7%, respectively. LOD and LOQ were, respectively, 0.67 and 2.13 ng mg^?1 for DMP and 0.14 and 0.47 ng mg^?1 for DRP. The responses were linear with correlation coefficients (r > 0.9995) for the drugs studied. The applicability of the method was proven by analysis of authentic hair samples.     

Pore size distributions in low‐k dielectric thin films from X‐ray porosimetry

X‐ray reflectivity has been used to determine the mass uptake of probe molecules in porous thin films supported on thick silicon wafers. The adsorption occurs by capillary condensation when the films are exposed to probe vapor at controlled partial vapor pressures. The probe solvent partial pressure was varied by mixing saturated air and dry air at constant temperature or by changing sample temperature at a constant vapor concentration. Pore size distribution in the films can be calculated from the probe uptake with typical porosimetric approaches such as the application of the Kelvin equation to convert partial pressure into pore size. For illustration, the pore size distribution of three different nanoporous thin films, the primary candidate of ultra‐low‐k interlevel dielectrics in the next generation of integrated circuit chips, was determined with this technique. These samples represent different generations of low‐k dielectrics developed by industry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2170–2177, 2002     

On-line determination of organophosphorus pesticides in water by solid-phase microextraction and gas chromatography with thermionic-selective detection

This paper describes the extraction of 49 organophosphorus pesti-cides (OPPs) from water samples using solid-phase microextraction (SPME). Three fibers, including a 15-μm XAD-coated fiber, a 85-μm polyacrylate-coated fiber, and a 30-μm polydimethylsilox-ane-coated fiber (PDMS), were evaluated here. The effects of stirring and the addition of NaCl to the sample were examined for the polyacrylate-coated fiber. The precision of the technique was examined for all three fibers and the extraction kinetics were investigated using the XAD- and polyacrylate-coated fibers. With some exceptions, the XAD- and polyacrylate-coated fibers performed better than the PDMS-coated fiber. The superiority of the XAD-nd polyacrylate-coated fiber. The superiority of the XAD- and polyacrylate-coated fibers over the PDMS-coated fibers can be attribuibuted to the aromatic functionalities of the XAD and the polar functionalities in the polyacrylate. The relatively high percent RSDs indicate that the SPME technique needs to be further refined before it can be used for anything other than screening. A more effective form of agitation than mechanical stirring may be neccessary to reduce variability and achieve a faster equilibrium between the sample and the SPME fiber.     

Nucleophilic substitution in 5,6,7,8-tetrafluoro- and 6,7-difluoro-1,2,3,4-tetrahydro-9-alkenyl-1,4-methanonaphthalenes and related compounds. A search for homoallylic conjugation

The second-order rate constants for the nucleophilic replacement of fluorine by isopropoxide in 5,6,7,8-tetrafluoro- and 6,7,-difluoro-1,2,3,4-tetrahydro-9-alkenyl-1,4-methanonaphthalenes and related 9-alkyl systems have been measured. A factor of 6 - 7 separates the most reactive compounds [the 9- (4′-trifluoromethylbenzylidene) derivatives] from the least reactive compounds [the syn-9-isopropyl derivatives] in both the tetrafluoro- and difluoro-series. It is concluded for these small reactivity differences.     

Polyarylate–polystyrene block copolymer from macro-azoinitiator: Synthesis and its thermal properties

A macro-azoinitiator containing polyarylate segment and azo group was prepared by the solution polycondensation of azobiscyanopentanoyl chloride and hydroxy-terminated polyarylates having viscosity-average molecular weights of 6200, 8100, and 12 400. These macro-azoinitiators were used in the radical polymerization of styrene to synthesize polyarylate-polystyrene block copolymers. Thermal properties measured by the differential scanning calorimetry indicated the phase separated morphology of the block copolymers except at low molecular weight of the block constituents. © 1993 John Wiley & Sons, Inc.     

Submanifolds of complex space forms admitting an almost contact metric compound structure

Summary Real hypersurfaces of an almost Hermitian manifold naturally admit an almost contact metric structure and the (f, g, u, v, w, , , )-structure is defined on submanifolds of codimension 3 of an almost Hermitian manifold. We study the so-called semi-invariant submanifolds of a complex space form with almost contact metric compound structure which is a general notion of (f, g, u, v, w, , , )-structure.Dedicated to professor Eulyong Pak on his 60th birthdayThis research was partially supported by Korean Science and Engineering Foundation Grant.