An efficient meshless computational technique to simulate nonlinear anomalous reaction–diffusion process in two-dimensional space

Nonlinear Dynamics - In this paper, a numerical simulation of an anomalous reaction–diffusion process in two-dimensional space with a nonlinear source term is presented. An efficient and...     

Highly Sensitive Nanostructured Electrochemical Sensor Based on Carbon Nanotubes-Pt Nanoparticles Paste Electrode for Simultaneous Determination of Levodopa and Tyramine

A multicomponent electrochemical sensor, with two nanometer-scale components in sensing matrix/electrode, was used to simultaneous determination of levodopa (LD) and tyramine (TR) in pharmaceutical and diet samples. Multiwall carbon nanotubes (MWCNTs) were used as carbonaceous materials in the electrode construction. 5-amino-3',4'-dimethoxy-biphenyl-2-ol (5ADMB) was used as electron mediator and Pt nanoparticles (nPt) as a catalyst. The 5ADMB catalyzes the oxidation of LD to the corresponding catecholamine, which is electrochemically reduced back to LD. Preparation of this electrode was very simple and modified electrode showed good properties at electrocatalytic oxidization of LD and TR. Using differential pulse voltammetry (DPV), a highly selective and simultaneous determination of LD and TR has been explored at the modified electrode. Differential pulse voltammetry peak currents of LD and TR increased linearly with their concentrations at the ranges of 0.50–100.0 μM and 0.60–100.0 μM, respectively. Also, the detection limits for LD and TR were 0.31 and 0.52 μM, respectively. The electrode exhibited an efficient catalytic response with good reproducibility and stability.     

Sensitive and selective fluorescence detection of aqueous uranyl ions using water-soluble CdTe quantum dots

Herein we report a fluorescent method for sensitive and selective detection of uranyl ions using CdTe quantum dots functionalized with mercaptopropionic acid, which the fluorescence of the quantum dots could be quantitatively quenched through electron transfer mechanism. The detection limit of the method was estimated to be 4 nM, less than the maximum allowed content of 130 nM for uranyl in drinking water defined by the U.S. Environmental Protection Agency. Furthermore, the probe was successfully applied in detection of uranyl ions in real samples, demonstrating its potential practical applications for monitoring of uranyl ions in environment.     

Improve Corrosion Resistance of Zircaloy by Copper–Graphene Nanocomposite Coatings

In this study, the corrosion behavior of Zircaloy was investigated in the presence and absence of copper–graphene nanocomposites coating. The coating was prepared employing Hummers’ and electrochemical reduction methods. The morphology of copper–graphene nanocomposites coating was studied using scanning electron microscopy (SEM). Corrosion behavior was investigated employing dynamic polarization and electrochemical impedance spectroscopy (EIS) tests in a solution containing lithium hydroxide (LiOH), boric acid (H₃BO₃), and deionized water. The results showed that corrosion resistance of Zircaloy increased with introduction of copper–graphene nanocomposites coatings. The lowest corrosion rate was attained in the Zircaloy with copper–graphene nanocomposites coating (corrosion rate: 0.040 mm/year). An approximately 20 times decrease in the corrosion rate was observed in the Zircaloy with copper–graphene nanocomposites coating when compared to the un-coated Zircaloy (corrosion rate: 0.831 mm/year).

     

Theoretical study of N–H· · ·O hydrogen bonding properties and cooperativity effects in linear acetamide clusters

We investigated geometry, energy, ${\nu_{{\text{N--H}}}}$ harmonic frequencies, ¹⁴N nuclear quadrupole coupling tensors, and ${n_{\rm O}\to \sigma _{{\text{N--H}}}^\ast}$ charge transfer properties of (acetamide) _n clusters, with n = 1 ? 7, by means of second-order Møller-Plesset perturbation theory (MP2) and DFT method. Dependency of dimer stabilization energies and equilibrium geometries on various levels of theory was examined. B3LYP/6-311++G** calculations revealed that for acetamide clusters, the average hydrogen-bonding energy per monomer increases from ?26.85 kJ mol^?1 in dimer to ?35.12 kJ mol^?1 in heptamer; i.e., 31% cooperativity enhancement. The n-dependent trend of ${\nu_{{\text{N--H}}}\,{and}\,^{14}}$ N nuclear quadrupole coupling values were reasonably correlated with cooperative effects in ${r_{{\text{N--H}}}}$ bond distance. It was also found that intermolecular ${n_{\rm O}\to \sigma_{{\text{N--H}}}^\ast}$ charge transfer plays a key role in cooperative changes of geometry, binding energy, ${\nu_{{\text{N--H}}}}$ harmonic frequencies, and ¹⁴N electric field gradient tensors of acetamide clusters. There is a good linear correlation between ¹⁴N quadrupole coupling constants, C _Q (¹⁴N), and the strength of Fock matrix elements (F _ij ). Regarding the ${n_{\rm O}\to \sigma_{{\text{N--H}}}^\ast}$ interaction, the capability of the acetamide clusters for electron localization, at the N–H· · ·O bond critical point, depends on the cluster size and thereby leads to cooperative changes in the N–H· · ·O length and strength, N–H stretching frequencies, and ¹⁴N quadrupole coupling tensors.     

Development of a method for analysis of Iranian damask rose oil: combination of gas chromatography-mass spectrometry with Chemometric techniques

Gas chromatography-mass spectrometry (GC-MS) combined with Chemometric resolution techniques were proposed as a method for the analysis of volatile components of Iranian damask rose oil. The essential oil of damask rose was extracted using hydrodistillation method and analyzed with GC-MS in optimized conditions. A total of 70 components were identified using similarity searches between mass spectra and MS database. This number was extended to 95 components with concentrations higher than 0.01% accounting for 94.75% of the total relative content using Chemometric techniques. For the first time in this work, an approach based upon subspace comparison is used for determination of the chemical rank of GC-MS data. The peak clusters were resolved using heuristic evolving latent projection (HELP) and multivariate curve resolution-alternating least square (MCR-ALS) by applying proper constraints, and the combination of both methods for some cases. It is concluded that a thorough analysis of the complex mixtures such as Iranian damask rose requires sophisticated GC-MS coupled with the Chemometric techniques.     

Tuning Human Serum Albumin (HSA) Hydrogels through Albumin Glycation

The changes of technological properties of albumin-based hydrogels induced by increasing degrees of post-translational modification of the protein are reported. Maillard-type modification of amino acids arginine and lysine of albumin is achieved through glyoxal as an α-dicarbonyl compound. The degrees of modification are fine-tuned using different molar ratios of glyoxal. Hydrogels are thermally induced by heating highly concentrated precursor solutions above the protein's denaturation temperature. While the post-translational modifications are determined and quantified with mass spectrometry, continuous-wave (CW) electron paramagnetic resonance (EPR) spectroscopy shed light on the protein fatty acid binding capacity and changes thereof in solution and in the gel state. The viscoelastic behavior is characterized as a measure of the physical strength of the hydrogels. On the nanoscopic level, the modified albumins in low concentration solution reveal lower binding capacities with increasing degrees of modification. On the contrary, in the gel state, the binding capacity remains constant at all degrees of modifications. This indicates that the loss of fatty acid binding capacity for individual albumin molecules is partially compensated by new binding sites in the gel state, potentially formed by modified amino acids. Such, albumin glycation offers a fine-tuning method of technological and nanoscopic properties of these gels.     

Photo catalytic degradation of linear alkylbenzene sulfonic acid

Linear alkylbenzene sulfonic acid (LAS) is a common substance used in the production of detergents in the world. This is an organic material with its structure made of benzene ring and double bonds. This structure creates many problems for the environment and humans. Up to now, various methods have been used to eliminate this pollution. A recently proposed method to remove this organic pollution is advanced oxidation processes. Photocatalytic degradation is also an efficient method to destroy organic structures. In this research, TiO₂ nanoparticles are used as a photocatalyst that is activated by UV irradiation. TiO₂ nanoparticles and pollution suspension are incorporated into the new design of the reactor with coaxial cylinders in which the inner cylinder rotates at a constant speed. The results show that in low concentrations of LAS, using TiO₂ nanoparticles, the time to reach pollution elimination is reduced significantly. In higher concentrations of LAS, UV irradiation is more effective than activated TiO₂ nanoparticles.     

Implementing a two-layer feed-forward catalytic DNA circuit for enzyme-free and colorimetric detection of nucleic acids

In the present study, a highly sensitive and specific bio-sensing platform for enzyme-free and colorimetric detection of nucleic acids has been developed. The biosensor is composed of two DNA nanostructures and two fuel strands that construct the foundation of a feed-forward catalytic DNA circuit. Upon binding the target strand to a specific DNA nanostructure, the circuit is run in order that at the end a hemin-binding aptamer, with the ability to convert a colorless substrate into a colored substance is released. Based on this strategy, 4 pM of the target DNA can be easily detected in serum samples by naked eyes after only a two-hour incubation with the circuit; meanwhile, if the incubation time is extended to 3 h, the biosensor can detect 1 pM of the target DNA. Besides the elevated sensitivity, the circuit can truly discriminate a spurious target containing one nucleotide mismatch with high specificity. Overall, the enzyme-free catalytic DNA circuit can be used as a sensitive alternative method to enzyme-based biosensors for the specific and cost-effective detection of nucleic acids.     

Quality assessment of gasoline using comprehensive two‐dimensional gas chromatography combined with unfolded partial least squares: A reliable approach for the detection of gasoline adulteration

Comprehensive two‐dimensional gas chromatography and flame ionization detection combined with unfolded‐partial least squares is proposed as a simple, fast and reliable method to assess the quality of gasoline and to detect its potential adulterants. The data for the calibration set are first baseline corrected using a two‐dimensional asymmetric least squares algorithm. The number of significant partial least squares components to build the model is determined using the minimum value of root‐mean square error of leave‐one out cross validation, which was 4. In this regard, blends of gasoline with kerosene, white spirit and paint thinner as frequently used adulterants are used to make calibration samples. Appropriate statistical parameters of regression coefficient of 0.996–0.998, root‐mean square error of prediction of 0.005–0.010 and relative error of prediction of 1.54–3.82% for the calibration set show the reliability of the developed method. In addition, the developed method is externally validated with three samples in validation set (with a relative error of prediction below 10.0%). Finally, to test the applicability of the proposed strategy for the analysis of real samples, five real gasoline samples collected from gas stations are used for this purpose and the gasoline proportions were in range of 70–85%. Also, the relative standard deviations were below 8.5% for different samples in the prediction set.