Absolute Rate Constants in Free-Radical Polymerization. III. Determination of Propagation and Termination Rate Constants for Styrene and Methyl Methacrylate

A spatially intermittent polymerization (SIP) reactor has been used for determination of absolute rate constants in photo-initiated, free-radical polymerization of styrene (STY) and methyl methacrylate (MMA). Experimental data are reported in the temperature range 15-30°C and in the high molecular weight region for MMA and STY. Additional experimental data are reported at 30° C and various lower molecular weights for STY which indicate that the propagation rate constant K is independent of polymer molecular weight, and K is dependent on molecular weight, especially at low molecular weight, approaching an approximately constant value at high molecular weight.     

Phoebegrandine C, a novel proaporphine-tryptamine dimer, from Phoebe grandis (Nees) Merr

A novel proaporphine-tryptamine dimer alkaloid, named phoebegrandine C 1, was isolated from the leaves of Phoebe grandis (Nees) Merr. Its structural elucidation was carried out using spectroscopic techniques, notably 2D NMR.     

Enantioselective synthesis of bicylco[3.2.1]octan-8-ones using a tandem Michael-Henry reaction

Bicyclo[3.2.1]octan-8-ones have been prepared from a tandem Michael-Henry reaction between cyclohexane-1,2-diones and nitroalkenes using a quinine-derived thiourea as the catalyst. Although four stereogenic centers were created during the reaction, only two diastereomers were obtained in good diastereoselectivity and high enantioselectivity (92-99% ee). When 3-methylcyclohexane-1,2-dione (R¹=Me) was used as the substrate, only the regioisomeric product of the corresponding thermodynamic enolate was obtained.     

A FeCl3-promoted highly atropodiastereoselective cascade reaction: synthetic utility of radical cations in indolostilbene construction

The FeCl₃-promoted oxidative cyclization/coupling of acetamidostilbenes possessing 3-methoxy, 4-methoxy and 3,5-methoxy substitutions (21), (22) and (23) is described. Only 3,5-substitution gave rise to novel indolostilbenes, each possessing two stereogenic axes (axially chiral but racemic dimers (39) and (40)). The 4-methoxy substituted acetamidostilbenes, by contrast, yielded the bisindoline dimer (36).     

Synthesis and characterization of nickel(II) complexes with three potentially hexadentate Schiff-base ligands and polyamines: X-ray crystal structure determination of one nickel(II) complex

Three new potentially hexadentate N₄O₂ Schiff-base ligands (H₂L¹, H₂L² and H₂L³) were prepared from the reaction of the polyamines N,N′-bis(2-aminophenyl)-1,2-ethanediamine (L¹), N,N′-bis(2-aminophenyl)-1,3-propanediamine (L²) and N,N′-bis(2-aminophenyl)-1,4-butanediamine (L³), respectively with salicylaldehyde. Reaction of the Schiff bases with Ni(II) salts in the presence of N(Et)₃ gave the neutral complexes [NiL⁴], [NiL⁵] and [NiL⁶]. Ni(II) complexes of the polyamines were also prepared. One of complexes [Ni(L¹)(MeCN)₂](ClO₄)₂·MeCN has been characterized through X-ray diffraction methods.     

Atomic Force Microscopy and X‐Ray Photoelectron Spectroscopy of Lead(II) Membrane Electrode Based on Dithiodibenzoic Acid as Ionophore

The use of 1‐butyl‐3‐methylimidazolium hexafluorophosphate ionic liquid [C₄mim][PF₆] as additive in a Pb(II) plastic membrane electrode increased significantly the selectivity of the sensor. Atomic force microscopy and depth profiling X‐ray photoelectron spectroscopy were applied to investigate the compositional and morphological changes of the surface and bulk of the membrane during the conditioning process of the electrode.     

Synthesis,Characterization and Solvatochromism Investigation of Mixed Ligand Chelate Copper(II) Complexes with Acetyleacetonate and Three Diamine Ligands

The syntheses of three mixed ligand chelate copper(II) complexes of the type [Cu(L)(acac)(H₂O)]BPh₄ where acac=acetyleacetonate; L=N,N‐dimethyl,N′‐benzylethane‐1,2‐diamine ( L¹ ), N,N‐dimethyl, N′‐2‐methylbenzylethane‐1,2‐diamine ( L² ) or N,N‐dimethyl,N′‐2‐chlorobenzylethane‐1,2‐diamine ( L³ ) are reported and characterized by elemental analyses, spectroscopic and molar conductance measurements. The X‐ray structure of complex 1 shows that the central copper atom is placed in a distorted square pyramidal geometry made by acac and diamine chelate in the base and a H₂O molecule on the apex. The prepared complexes are fairly soluble in a large number of organic solvents and show positive solvatochromism. Calculations of SMLR (stepwise multiple linear regression) method was utilized to find the best model explaining the observed solvatochromic behavior and showed that among different solvent parameters, donor number (DN) is a dominant factor responsible for the shift in the d‐d absorption band of the complexes to the lower wavenumber with increasing its values. The importance of substituent effect in diamine ligand on the spectral and SMLR measurements is also discussed.     

High temperature oxidation resistance and corrosion properties of dip coated silica coating by sol gel method on stainless steel

Silica coating for the protection of stainless steel (SS) surfaces was prepared using tetraethoxysilane and methyltriethoxysilane as precursors via an acid-catalysed (H₂SO₄) sol?Cgel method and was deposited on ferritic SS AISI 430 by dip coating. The surface morphology was studied using a scanning electron microscope equipped with energy-dispersive X-ray, phase analysis was carried out by X-ray diffraction, and isothermal oxidation was carried out at 800?°C for 200?h. Corrosion properties were examined by electrochemical impedance spectroscopy and resistance polarization methods in an aqueous medium containing 3.5?wt?% NaCl. The results indicated that silica coating improved high-temperature oxidation resistance of AISI 430 in chloride media.     

Size Control of FePt Nanoparticles Produced by Seed Mediated Growth Process

Monodisperse FePt nanoparticles with average size of 2.4?nm were successfully synthesized via chemical co-reduction of iron acetylacetonate, Fe(acac)₃, and platinum acetylacetonate, Pt(acac)₂, by 1,2-hexadecanediol as a reducing agent and oleic acid and oleyl amine as surfactant. Then using the seed mediated growth process smaller sized FePt nanoparticles are used as seeds for the growth of larger sized FePt particles and there is no specific limitation to achieve upper size range by this method. In this work, we could synthesize FePt nanoparticles up to 4.0?nm. Monodispersity with relatively narrow size distribution and having the same elemental composition with the atomic percentage of Fe _x Pt_100?x (x?=?63) are the main advantages of this method. As-made FePt nanoparticles have the chemical disordered face centered cubic structure with superparamagnetic behavior at room temperature. After annealing these particles become ferromagnetic with high magnetocrystalline anisotropy and their coercivity increases with increasing particle sizes and reaches a maximum value of 5,200?Oe for size of 46.5?nm